Performance of a stand-alone renewable energy system based on energy storage as hydrogen

Electrolytic hydrogen offers a promising alternative for long-term energy storage of renewable energy (RE). A stand-alone RE system based on energy storage as hydrogen has been developed and installed at the Hydrogen Research Institute, and successfully tested for autonomous operation with developed control system and power conditioning devices. The excess energy produced, with respect to the load requirement, has been sent to the electrolyzer for hydrogen production. When energy produced from the RE sources became insufficient, with respect to the load requirement, the stored hydrogen was fed to a fuel cell to produce electricity. The RE system components have substantially different voltage-current characteristics and they are integrated through power conditioning devices on a dc bus for autonomous operation by using a developed control system. The developed control system has been successfully tested for autonomous operation and energy management of the system. The experimental results clearly indicate that a stand-alone RE system based on hydrogen production is safe and reliable.     

Electric round-trip efficiency of hydrogen and oxygen-based energy storage

An electrolyzer and a fuel cell have been integrated in a small-scale stand-alone renewable energy system to demonstrate that hydrogen can be used for long-term stationary energy storage. The economic and environmental performance of such a system is strongly related to the ability of the electrolyzer to convert electrical energy to hydrogen and the ability of the fuel cell to convert hydrogen back to electrical energy, which together define the round-trip efficiency of the hydrogen storage system. One promising way to improve the efficiency as well as to decrease the capital costs of the fuel cell is to recuperate the oxygen from the electrolyzer and use it as the fuel cell oxidant instead of compressed air. This paper presents the modifications made to the system in order to implement oxygen recuperation. The round-trip system efficiency was found to be 18% with oxygen recuperation and 13.5% without it.     

Experimental results for hybrid energy storage systems coupled to photovoltaic generation in residential applications

An experimental solar-hydrogen powered residence simulator was built and tested. The system consisted of a solar photovoltaic array connected to an electrolyzer which produced hydrogen as a means of energy storage. The hydrogen was used to produce electricity in a fuel cell that operated in parallel with a battery to meet dynamic power demand similar to that found in residential applications. The study demonstrated the technical feasibility of operating such a system under the simultaneous dynamics of solar input and load. Limitations of current fuel cell and electrolyzer designs, as they pertain to both power delivery and energy storage, were identified. The study also established the need to understand and address dynamic performance in the design and application of solar-hydrogen reversible fuel cell hybrid systems. An economic analysis found that major cost reductions would need to be achieved for such systems to compete with conventional energy storage devices.     

Control analysis of renewable energy system with hydrogen storage for residential applications

The combination of an electrolyzer and a fuel cell can provide peak power control in a decentralized/distributed power system. The electrolyzer produces hydrogen and oxygen from off-peak electricity generated by the renewable energy sources (wind turbine and photovoltaic array), for later use in the fuel cell to produce on-peak electricity. An issue related to this system is the control of the hydrogen loop (electrolyzer, tank, fuel cell). A number of control algorithms were developed to decide when to produce hydrogen and when to convert it back to electricity, most of them assuming that the electrolyzer and the fuel cell run alternatively to provide nominal power (full power). This paper presents a complete model of a stand-alone renewable energy system with hydrogen storage controlled by a dynamic fuzzy logic controller (FLC). In this system, batteries are used as energy buffers and for short time storage. To study the behavior of such a system, a complete model is developed by integrating the individual sub-models of the fuel cell, the electrolyzer, the power conditioning units, the hydrogen storage system, and the batteries. An analysis of the performances of the dynamic fuzzy logic controller is then presented. This model is useful for building efficient peak power control.     

Model for energy conversion in renewable energy system with hydrogen storage

A dynamic model for a stand-alone renewable energy system with hydrogen storage (RESHS) is developed. In this system, surplus energy available from a photovoltaic array and a wind turbine generator is stored in the form of hydrogen, produced via an electrolyzer. When the energy production from the wind turbine and the photovoltaic array is not enough to meet the load demand, the stored hydrogen can then be converted by a fuel cell to produce electricity. In this system, batteries are used as energy buffers or for short time storage. To study the behavior of such a system, a complete model is developed by integrating individual sub-models of the fuel cell, the electrolyzer, the power conditioning units, the hydrogen storage system, and the batteries (used as an energy buffer). The sub-models are valid for transient and steady state analysis as a function of voltage, current, and temperature. A comparison between experimental measurements and simulation results is given. The model is useful for building effective algorithms for the management, control and optimization of stand-alone RESHSs.     

A solar hydrogen hybrid system with activated carbon storage

A solar hydrogen hybrid system has been developed to convert, store and use energy from renewable energy sources. The theoretical model has been implemented in a dynamic model-based software environment and applied to real data. A photovoltaic sub-system drives a residential load and, if a surplus of energy is available, an electrolyzer to produce hydrogen which is stored in a cluster of nitrogen-cooled tanks filled with activated carbons; when needed, hydrogen is used in a fuel cell to supply power to the load. Hydrogen storage is achieved through physisorption at low temperature and low pressures. Physisorption storage provides safer operations along with good gravimetric and volumetric capacities at costs comparable to or smaller than compression or liquefaction storage.     

Performance investigation of an integrated wind energy system for co-generation of power and hydrogen

In this paper, a wind turbine energy system is integrated with a hydrogen fuel cell and proton exchange membrane electrolyzer to provide electricity and heat to a community of households. Different cases for varying wind speeds are taken into consideration. Wind turbines meet the electricity demand when there is sufficient wind speed available. During high wind speeds, the excess electricity generated is supplied to the electrolyzer to produce hydrogen which is stored in a storage tank. It is later utilized in the fuel cell to provide electricity during periods of low wind speeds to overcome the shortage of electricity supply. The fuel cell operates during high demand conditions and provides electricity and heat for the residential application. The overall efficiency of the system is calculated at different wind speeds. The overall energy and exergy efficiencies at a wind speed 5 m/s are then found to be 20.2% and 21.2% respectively.     

Fabrication of hydrogen electrode supported cell for utilized regenerative solid oxide fuel cell application

A utilized regenerative solid oxide fuel cell (URSOFC) provides the dual function of performing energy storage and power generation, all in one unit. When functioning as an energy storage device, the URSOFC acts like a solid oxide electrolyzer cell (SOEC) in water electrolysis mode; whereby the electric energy is stored as (electrolyzied) hydrogen and oxygen gases. While hydrogen is useful as a transportation fuel and in other industrial applications, the URSOFC also acts as a solid oxide fuel cell (SOFC) in power generation mode to produce electricity when needed. The URSOFC would be a competitive technology in the upcoming hydrogen economy on the basis of its low cost, simple structure, and high efficiency. This paper reports on the design and manufacturing of its anode support cell using commercially available materials. Also reported are the resulting performance, both in electrolysis and fuel cell modes, as a function of its operating parameters such as temperature and current density. We found that the URSOFC performance improved with increasing temperature and its fuel cell mode had a better performance than its electrolysis mode due to a limited humidity inlet causing concentration polarization. In addition, there were great improvements in performance for both the SOFC and SOEC modes after the first test and could be attributed to an increase in porosity within the oxygen electrode, which was beneficial for the oxygen reaction.     

Monitoring and control of a hydrogen production and storage system consisting of water electrolysis and metal hydrides

Renewable energy sources such as wind turbines and solar photovoltaic are energy sources that cannot generate continuous electric power. The seasonal storage of solar or wind energy in the form of hydrogen can provide the basis for a completely renewable energy system. In this way, water electrolysis is a convenient method for converting electrical energy into a chemical form. The power required for hydrogen generation can be supplied through a photovoltaic array. Hydrogen can be stored as metal hydrides and can be converted back into electricity using a fuel cell. The elements of these systems, i.e. the photovoltaic array, electrolyzer, fuel cell and hydrogen storage system in the form of metal hydrides, need a control and monitoring system for optimal operation. This work has been performed within a Research and Development contract on Hydrogen Production granted by Solar Iniciativas Tecnológicas, S.L. (SITEC), to the Politechnic University of Valencia and to the AIJU, and deals with the development of a system to control and monitor the operation parameters of an electrolyzer and a metal hydride storage system that allow to get a continuous production of hydrogen.     

Solar-powered regenerative PEM electrolyzer/fuel cell system

An electrolyzer/fuel cell energy storage system is a promising alternative to batteries for storing energy from solar electric power systems. Such a system was designed, including a proton-exchange membrane (PEM) electrolyzer, high-pressure hydrogen and oxygen storage, and a PEM fuel cell. The system operates in a closed water loop. A prototype system was constructed, including an experimental PEM electrolyzer and combined gas/water storage tanks. Testing goals included general system feasibility, characterization of the electrolyzer performance (target was sustainable 1.0 A/cm² at 2.0 V per cell), performance of the electrolyzer as a compressor, and evaluation of the system for direct-coupled use with a PV array. When integrated with a photovoltaic array, this type of system is expected to provide reliable, environmentally benign power to remote installations. If grid-coupled, this system (without PV array) would provide high-quality backup power to critical systems such as telecommunications and medical facilities.     

Multi-objective optimal design of hybrid renewable energy systems using PSO-simulation based approach

Recently, the increasing energy demand has caused dramatic consumption of fossil fuels and unavoidable raising energy prices. Moreover, environmental effect of fossil fuel led to the need of using renewable energy (RE) to meet the rising energy demand. Unpredictability and the high cost of the renewable energy technologies are the main challenges of renewable energy usage. In this context, the integration of renewable energy sources to meet the energy demand of a given area is a promising scenario to overcome the RE challenges. In this study, a novel approach is proposed for optimal design of hybrid renewable energy systems (HRES) including various generators and storage devices. The ε-constraint method has been applied to minimize simultaneously the total cost of the system, unmet load, and fuel emission. A particle swarm optimization (PSO)-simulation based approach has been used to tackle the multi-objective optimization problem. The proposed approach has been tested on a case study of an HRES system that includes wind turbine, photovoltaic (PV) panels, diesel generator, batteries, fuel cell (FC), electrolyzer and hydrogen tank. Finally, a sensitivity analysis study is performed to study the sensibility of different parameters to the developed model.     

Technical and economical design of PV system and hydrogen storage including a sodium hypochlorite plant in a small community: Case of study of Paraguay

The increasing use of renewable power sources for distributed generation (DG) has made the application of storage systems a necessity to ensure the continuous supply. This paper analyzes technically and economically an autonomous sodium hypochlorite plant using a renewable energy source and a hydrogen storage system in the Western Region of Paraguay. In this region, there is abundant underground brackish water to produce industrial and energetic hydrogen. In addition, an isolated photovoltaic (PV) system feeds with electricity an electrolyzer, used for sodium hypochlorite production, and the brackish water and freshwater pumping systems. The hydrogen and fuel cell are used as backup system in the operation of the electrolyzer. Preliminary results show that hydrogen stored during the day can increase hypochlorite production by up to 31%. The PV solar system surplus can supply the demand of an off-grid community near the plant. The results show that the plant's return on investment (ROI) is 7 years.     

PEM electrolysis for production of hydrogen from renewable energy sources

PEM electrolysis is a viable alternative for generation of hydrogen from renewable energy sources. Several possible applications are discussed, including grid independent and grid assisted hydrogen generation, use of an electrolyzer for peak shaving, and integrated systems both grid connected and grid independent where electrolytically generated hydrogen is stored and then via fuel cell converted back to electricity when needed. Specific issues regarding the use of PEM electrolyzer in the renewable energy systems are addressed, such as sizing of electrolyzer, intermittent operation, output pressure, oxygen generation, water consumption and efficiency.     

Development,analysis and assessment of fuel cell and photovoltaic powered vehicles

This paper deals with a new hybridly powered photovoltaic- PEM fuel cell – Li-ion battery and ammonia electrolyte cell integrated system (system 2) for vehicle application and is compared to another system (system 1) that is consisting of a PEM fuel cell, photovoltaic and Li-ion battery. The paper aims to investigate the effect of adding photovoltaic to both systems and the amount of hydrogen consumption/production that could be saved/generated if it is implemented in both systems. These two systems are analyzed and assessed both energetically and exergetically. Utilizing photovoltaic arrays in system 1 is able to recover 177.78 g of hydrogen through 1 h of continuous driving at vehicle output power of 98.32 kW, which is approximately 3.55% of the hydrogen storage tank used in the proposed systems. While, using the same photovoltaics arrays, system 2 succeeds to produce 313.86 g of hydrogen utilizing the ammonia electrolyzer system 2 appeared to be more promising as it works even if the car is not in operation mode. Moreover, the hydrogen produced from the ammonia electrolyzer can be stored onboard, and the liquefied ammonia can be used as a potential source for feeding PEM fuel cell with hydrogen. Furthermore, the effects of changing various system parameters on energy and exergy efficiencies of the overall system are investigated.     

Optimizing hydrogen production capacity and day ahead market bidding for a wind farm in Texas

Producing green hydrogen from wind energy is one potential method to mitigate curtailment. This study develops a general approach to examine the economic benefit of adding hydrogen production capacity through water electrolysis along with the fuel cell and storage facilities in a wind farm in north Texas. The study also investigates different day ahead market bidding strategies in the existence of these technologies. The results show that adding hydrogen capacity to the wind farm is profitable when hydrogen price is greater than $3.58/kg, and that the optimal day ahead market bidding strategy changes as hydrogen price changes. The results also suggest that both the addition of a fuel cell to reconvert stored hydrogen to electricity and the addition of a battery to smooth the electricity input to the electrolyzer are suboptimal for the system in the case of this study. The profit of a particular bidding scenario is most sensitive to the selling price of hydrogen, and then the input parameters of the electrolyzer. This study also provides policy implications by investigating the impact of different policy schemes on the optimal hydrogen production level.     

Development of hybrid photovoltaic-fuel cell system for stand-alone application

In this paper we present firstly the different hybrid systems with fuel cell. Then, the study is given with a hybrid fuel cell–photovoltaic generator. The role of this system is the production of electricity without interruption in remote areas. It consists generally of a photovoltaic generator (PV), an alkaline water electrolyzer, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to manage the system operation of the hybrid system. Different topologies are competing for an optimal design of the hybrid photovoltaic–electrolyzer–fuel cell system. The studied system is proposed. PV subsystem work as a primary source, converting solar irradiation into electricity that is given to a DC bus. The second working subsystem is the electrolyzer which produces hydrogen and oxygen from water as a result of an electrochemical process. When there is an excess of solar generation available, the electrolyzer is turned on to begin producing hydrogen which is sent to a storage tank. The produced hydrogen is used by the third working subsystem (the fuel cell stack) which produces electrical energy to supply the DC bus. The modelisation of the global system is given and the obtained results are presented and discussed.     

Hydrogen as a battery for a rooftop household solar power generation unit

Decentralization of electrical power generation using rooftop solar units is projected to develop to not only mitigate power losses along transmission and distribution lines, but to control greenhouse gases emissions. Due to intermittency of solar energy, traditional batteries are used to store energy. However, batteries have several drawbacks such as limited lifespan, low storage capacity, uncontrolled discharge when not connected to a load and limited number of charge/discharge cycles. In this paper, the feasibility of using hydrogen as a battery is analyzed where hydrogen is produced by the extra diurnal generated electricity by a rooftop household solar power generation unit and utilized in a fuel cell system to generate the required electrical power at night. In the proposed design, two rooftop concentrated photovoltaic thermal (CPVT) systems coupled with an organic Rankine cycle (ORC) are used to generate electricity during 9.5 h per day and the extra power is utilized in an electrolyzer to produce hydrogen. Various working fluids (Isobutane, R134a, R245fa and R123) are used in the ORC system to analyze the maximum feasible power generation by this section. Under the operating conditions, the generated power by ORC as well as its efficiency are evaluated for various working fluids and the most efficient working fluid is selected. The required power for the compressor in the hydrogen storage process is calculated and the number of electrolyzer cells required for the hydrogen production system is determined. The results indicate that the hybrid CPVT-ORC system produces 2.378 kW of electricity at 160 suns. Supplying 65% of the produced electricity to an electrolyzer, 0.2606 kg of hydrogen is produced and stored for nightly use in a fuel cell system. This amount of hydrogen can generate the required electrical power at night while the efficiency of electrolyzer is more than 70%.     

Numerical and experimental studies on unitized regenerative proton exchange membrane fuel cell

Increasing energy need and running out of fossil-based fuels direct us to renewable energy resources. Although hydrogen is not an energy source by itself, it is an energy carrier with a high specific heat capacity. As it is used as fuel in unitized regenerative PEM fuel cells, water is separated in electrolyzer mode and stored by producing hydrogen when there is no need for energy. In this study, performance tests on the unitized regenerative PEM electrolyzer/fuel cell were carried out and numerical modelling has been performed. The validity of the developed model was confirmed by the results of the experimental study. Before starting the performance tests, the cell's leakproofness tests were carried out, and the appropriate torque force was optimized, reducing the contact resistance that causes performance loss. The material selection of the cell components and corrosion-resistant materials that can operate in both electrolyzer and fuel cell modes were preferred.In this study, 0.019 slpm of hydrogen and 0.0095 slpm of oxygen gas is produced in the electrolyzer mode, while a power density of 0.353 W/cm² is obtained in the fuel cell mode at 80 °C, from a unitized regenerative PEM fuel cell with a 5 cm² active area, whose cell elements are combined with a 3 Nm clamping torque by using 12 bolts.     

Design and transient-based analysis of a power to hydrogen (P2H2) system for an off-grid zero energy building with hydrogen energy storage

In this study, zero energy building (ZEB) with four occupants in the capital and most populated city of Iran as one of the biggest greenhouse gas producers is simulated and designed to reduce Iran's greenhouse emissions. Due to the benefits of hydrogen energy and its usages, it is used as the primary energy storage of this building. Also, the thermal comfort of occupants is evaluated using the Fanger model, and domestic hot water consumption is supplied. Using hydrogen energy as energy storage of an off-grid zero energy building in Iran by considering occupant thermal comfort using the fanger model has been presented for the first time in this study. The contribution of electrolyzer and fuel cell in supplying domestic hot water is shown. For this simulation, Trnsys software is used. Using Trnsys software, the transient performance of mentioned ZEB is evaluated in a year. PV panels are used for supplying electricity consumption of the building. Excess produced electricity is converted to hydrogen and stored in the hydrogen tank when a lack of sunrays exists and electricity is required. An evacuated tube solar collector is used to produce hot water. The produced hot water will be stored in the hot water tank. For supplying the cooling load, hot water fired water-cooled absorption chiller is used. Also, a fan coil with hot water circulation and humidifier are used for heating and humidifying the building. Domestic hot water consumption of the occupants is supplied using stored hot water and rejected heat of fuel cell and the electrolyzer. The thermal comfort of occupants is evaluated using the Fanger model with MATLAB software. Results show that using 64 m² PV panel power consumption of the building is supplied without a power outage, and final hydrogen pressure tank will be higher than its initial and building will be zero energy. Required hot water of the building is provided with 75 m² evacuated tube solar collector. The HVAC system of the building provided thermal comfort during a year. The monthly average of occupant predicted mean vote (PMV) is between ?0.4 and 0.4. Their predicted percentage of dissatisfaction (PPD) is lower than 13%. Also, supplied domestic hot water (DHW) always has a temperature of 50 °C, which is a setpoint temperature of DHW. Finally, it can be concluded that using the building's rooftop area can be transformed to ZEB and reduce a significant amount of greenhouse emissions of Iran. Also, it can be concluded that fuel cell rejected heat, unlike electrolyzer, can significantly contribute to supplying domestic hot water requirements. Rejected heat of electrolyzer for heating domestic water can be ignored.     

Development of large scale unified system for hydrogen energy carrier production and utilization: Experimental analysis and systems modeling

The world's largest class hydrogen energy carrier production, storage, and utilization system has been operated in order to obtain basic data for practical use of the system using renewable energy. In this system, an alkaline water electrolyzer is combined with hydrogenation reactors to produce methylcyclohexane (MCH). Since electrolyzer behavior directly affects hydrogenation reaction, behaviors of the 150 kW class water electrolyzer against fluctuating electricity inputs were experimentally investigated. The cell stack voltage and hydrogen flow rate changed following temporal changes of the input current, whereas the temperature response was slow due to the large heat capacity of the system. Hydrogenation reactors performance using the hydrogen from the electrolyzer are reported. Then, based on the experiment data, a numerical simulation model for the electrolyzer was developed, which predicts the experimental result using fluctuating electricity very well. Furthermore, using the simulator, the heat utilization from the hydrogenation reaction for the electrolyzer warm-up process was investigated.