共查询到19条相似文献,搜索用时 156 毫秒
1.
钢结构在我国高层建筑中应用现状的述评(下) 总被引:4,自引:0,他引:4
本文在大量调研工作的基础上,通过对我国高层建筑钢结构的科研,设计,材料制作,施工安装,总承包等环节实施力量的详细分析,指出目前我国发展高层钢结构必须解决的问题,主要包括国产化进程中存在的一些薄弱环节问题和结构设计技术问题。 相似文献
2.
本文简要介绍了浦东某高层钢结构大厦的结构扩初设计情况,提供了有关技术经济数据。独立设计高层钢结构在我国还属少见,希望本文能引起同行重视,有关数据可供同行参考 相似文献
3.
唐开一 《中国建筑金属结构》2013,(12)
伴随着我国民用建筑的快速发展,钢结构在一些民用高层建筑中已经得到了比较广泛的应用,并且获得了比较好的应用效果,受到各方的好评。但是目前来看我国很多地区在钢结构的应用中经验还不够丰富,钢结构的应用还处在起步的阶段。所以,如何能够更好的开展高层民用建筑中钢结构的施工已经成为了当下建筑领域所研究的重点内容。本文主要结合高层民用建筑中钢结构的优点进行了分析,并且对民用钢结构高层施工过程中的要点和流程进行了分析。以期能够更好的做好钢结构的施工,促进建筑行业的向前发展。 相似文献
4.
5.
本文重点阐述了钢结构外倾幕墙的基本概念及性能优点,并以银川某高层商业楼的屋顶钢结构外倾幕墙为实例,对钢结构在安装实践运用中的操作要点、技术测量、安装流程及注意事项等方面做了全面分析和探讨。 相似文献
6.
钢结构房屋具有结构重量轻、地震作用小、有效使用面积大且抗震性能优于其他材料结构的优点,遭遇低烈度地震时一般不受破坏,可基本按非抗震的要求设计;但在强烈地震中,如 1976年唐山地震、美国 1994年北岭地震及日本1978年宫城地震和 1995年阪神地震等,仍有钢结构房屋倒塌破坏,说明高烈度时钢结构仍需要采取一系列抗震措施。随着我国钢材产量的增加,国家要求积极发展钢结构。新抗震规范在保留单层钢结构厂房内容的同时,参考行业标准 高层民用建筑钢结构技术规程 (以下简称 高钢规程 ),增添了多层与高层钢结构房屋的抗震设计要… 相似文献
7.
简述了我国近年来高层钢结构建筑的发展情况,在此基础上,结合工程实例对两种特殊体型的高层钢结构的结构性能作了分析,提出了一些问题和相应的解决方法. 相似文献
8.
我国高怪建筑钢结构发展方向初探 总被引:1,自引:0,他引:1
探讨我国目前广泛采用的混凝土核心筒钢框架高层混合结构的利弊,介绍了钢管混凝土结构的优点,在我国的发展近况及在美国高层建筑中的应用,并对我国高层建筑钢结构的发展提出了若干建议。 相似文献
9.
介绍了高层钢结构建筑的发展历程,通过对高层钢结构建筑的产生原因进行分析,从高层钢结构建筑与城市的互动关系进行了论述,为高层钢结构建筑设计提供了新思路。 相似文献
10.
中国钢结构的现状和展望 总被引:5,自引:0,他引:5
钢结构推广应用简况 1、高层钢结构。 自20世纪80年代末以来,我国内地已建成及在建的高层钢结构建筑已有近40幢,总面积约320万平方米,用钢量约30万吨,资金约600亿元人民币。 80年代在深圳、上海、北京等地建成 11幢高层钢结构, 90年代起先后在北京、上海、深圳、大连、天津等地已建成和正在施工的26幢高层钢结构,又形成新的建设高潮,尤其是在上海浦东陆家嘴金融区,已建成和建设中的就有12幢。已建成的上海金茂大厦( 88层,总高度达420.5米)及正在施工的环球金融大厦使中国的高层建筑进入世界的前… 相似文献
11.
对钢纤维混凝土的性能和高层建筑结构设计的特点做了分析,综述了钢纤维混凝土在局部增强高层建筑结构构件的物理性能和力学性能、改善结构的整体抗震性能方面的研究和应用. 相似文献
12.
本文提出了设置粘弹性阻尼器的钢结构高层建筑抗震抗风设计的实用方法。文中在导出了设置粘弹性阻尼器高层钢结构的有效阻尼比计算公式的基础上,建立了设置粘弹性阻尼器结构抗震设计反应谱的调整公式和抗风设计风振系数、脉动增大系数的调整公式。从而使设置粘弹性阻尼器钢结构高层建筑的抗震抗风设计可在我国《高层民阻建筑钢结构设计与施工》规程的基础上进行。应用本文方法对设置粘弹性阻尼器的50层全钢缔构超高层建筑──首都规划大厦主楼的抗震抗风设计的结果表明:粘弹性阻尼器是一种十分有效的减振耗能构件,它有效地减小了结构构件的地震设计内力和结构横风向的风振加速度。对于设置粘弹性阻尼器的高层钢结构,本文提出的抗震抗风设计方法是一种对结构工程师应用十分方便的实用设计方法。 相似文献
13.
14.
Xiaodan Ren Qiong Bai Chengdong Yang Jie Li 《The Structural Design of Tall and Special Buildings》2018,27(4)
For the seismic design of tall building structures, the behavior under severe earthquakes should be carefully considered and the upper limit of inter‐story deformations are often defined by the design codes. To improve the performance of structures under severe earthquakes, composite structural members, including steel reinforced column and steel plate reinforced shear wall, are often adopted. In the present work, the seismic behavior of tall buildings using steel–concrete composite columns and shear walls is investigated numerically. Fiber beam–column element models and multilayer shell models are adopted to establish the finite element model of structure, and the material nonlinearities are described by the plasticity and damage models. The accuracy of the developed models is verified by the experimental results of a single shear wall. Systematic numerical simulations are performed for the tall building structures subjected to different earthquakes. The comparative study indicates that the nonlinear redistribution of internal forces plays a very important role for the performance of tall buildings under severe earthquakes. 相似文献
15.
Although today's engineering computer technology allows for precise analysis of the structural response of a building, it does not readily provide insight for economical design. Due to the complex nature of a modern tall building consisting of thousands of structural members, the traditional design method is generally highly iterative and time consuming. This paper describes an efficient computer-based technique for least-weight design of three-dimensional (3D) tall steel building frameworks under multiple lateral loading conditions. Stiffness constraints in terms of interstorey drifts are considered and optimum discrete member sizes are automatically selected from databases of commercial standard steel sections. The technique is remarkably efficient and the optimum design generally converges in a few cycles. The designs of two 3D lateral-load resisting building frameworks are presented as illustrations. The effectiveness and suitability of the technique for the design of large-scale tall steel building frameworks are discussed. 相似文献
16.
国内高层建筑结构设计的若干新进展 总被引:2,自引:0,他引:2
根据我国,主要是广东省最近几年建成或在建的广州西塔、广州珠江城、天建酒店和合景大厦,以及天津津塔等高层建筑,概括阐述近期高层建筑在规模、体形方面的发展,列举了几个比较典型的工程实例。结合国内其他类似工程,归纳出高层建筑结构最近的进展情况,包括结构体系、构件和节点等,并扼要陈述这类高层建筑结构设计中面对的问题和相应的计算分析手段。 相似文献
17.
全国大中型城市多高层建筑迅速增多,高层建筑结构设计已成为建筑结构设计人员的重要工作内容。关于如何选择结构体系也成为设计人员经常面临的问题。对八度区某188m高层建筑分别采用混合结构和钢结构两种结构体系进行分析,通过比较两种结构体系受力性能和经济指标,得出对于本工程,钢结构体系明显优于混合结构体系,并分析各自的优缺点,供结构设计人员参考。 相似文献
18.
19.
Kyoung Sun Moon 《The Structural Design of Tall and Special Buildings》2014,23(5):319-333
Employing twisted forms for tall buildings is a recent architectural phenomenon. This paper studies various structural system design options for twisted tall buildings and their performances based on lateral stiffness. Twisted tall buildings of various heights and rates of twist are designed with different types of contemporary tall building structural systems, such as diagrids, braced tubes and outrigger systems. The heights of the studied buildings range from 60 to 100 stories, and the rates of twist range from 0° to 3° per floor. As the rate of twist increases, the lateral stiffness of the tower decreases. The stiffness reduction rate caused by twisting is very much dependent upon the structural systems employed for twisted tall buildings. While an emphasis is placed on the structural performance of twisted tall buildings, other aspects, such as architectural and constructional issues, are also discussed holistically. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献