Moisture‐Absorption and Water Dynamics in the Powder of Egg Albumen Peptide,Met‐Pro‐Asp‐Ala‐His‐Leu

Moisture absorbed into the powder of Met‐Pro‐Asp‐Ala‐His‐Leu (MPDAHL)—a novel egg albumen antioxidant peptide—profoundly affects its properties. In this study, we elucidated water dynamics in MPDAHL using DVS, DSC, and low‐field ¹H NMR. Based on the DVS data, we found that MPDAHL sorption kinetics obey a parallel exponential model. DSC results indicated that both water and heating could change the microstructure of MPDAHL. The T₂ parameters of NMR reflected the different phases of moisture absorption revealed that there were 4 categories of water with different states or mobility in the MPDAHL during the moisture absorption process. The fastest fraction T_2b mainly dominated the hygroscopicity of MPDAHL and the absorbed water significantly changed the proton distribution and structure of MPDAHL. Thus, this study shows that DVS, DSC, and low‐field ¹H NMR are effective methods for monitoring water mobility and distribution in synthetic peptides. It can be used to improve the quality assurance of functional peptides.     

Degradation of N‐(1‐Deoxy‐d‐xylulos‐1‐yl)glycine and N‐(1‐Deoxy‐d‐xylulos‐1‐yl)proline using thermal treatment

The formation and degradation of N‐(1‐Deoxy‐d ‐xylulos‐1‐yl)glycine and N‐(1‐Deoxy‐d ‐xylulos‐1‐yl)proline, derived from the secondary amine Maillard reaction in xylose‐amino acid model solutions, were detailed in this study. The identification and quantitative analysis of N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)glycine and N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)proline were carried out using high‐performance anion‐exchange chromatography and high‐performance liquid chromatography. The formation of intermediate and advanced products derived from N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)glycine and N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)proline was also tested using an UV‐Vis spectrophotometer to gain a better comparing of the degradation process of the two important Maillard reaction products using thermal treatment. Results showed that the degradation of N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)glycine was more significant than N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)proline. Moreover, xylose was tested in the degradation products of both N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)glycine and N‐(1‐Deoxy‐d‐ xylulos‐1‐yl)proline, which indicated that the degradation of N‐substituted 1‐amino‐1‐deoxyketoses was a reversible reaction to form reducing sugar.     

Application of the fast sensory method ‘Rate‐All‐That‐Apply’ in chocolate Quality Control compared with DHS‐GC‐MS

This paper studied the fast sensory Rate‐All‐That‐Apply (RATA) method as a contributor to existing quality control (QC) in chocolate production by comparing it with the outcome of dynamic headspace sampling combined with gas chromatography–mass spectrometry (DHS‐GC‐MS). Seven different chocolates were evaluated by a semi‐trained panel using RATA. RATA showed potential as a sensory evaluation tool which could be part of QC programmes in chocolate production as RATA was efficient to perform and captured important sensory deviations, herein addition of excess lecithin and prolonged roasting. However, product deviations caused by long conching were only detected by DHS‐GC‐MS. A more extreme conching process must occur before it can be perceived by humans. RATA and DHS‐GC‐MS should be used as complementary methods in detecting future important issues in chocolate production. DHS‐GC‐MS detects product deviation from chemical perspectives while sensory evaluation gives information on quality parameters from a perceivable perspective influencing consumer satisfaction.     

Production and Properties of Spin‐Coated Cassava‐Starch‐Glycerol‐Beeswax Films

Cassava‐starch based polymer films containing glycerol as a plasticizer (1.0‐2.5‐5.0%, w/w) and different lipids as additives (paraffin, stearyl alcohol, and beeswax – 0.25‐0.5‐1.0%, w/w) were produced. Control films were produced by heating a mixture of glycerol, starch, and water, while treated films were produced by the addition of lipids/ ethanol solutions. The solutions were kept at around 70ºC during amalgamation, and once congealed, were placed in a vacuum oven for 1 h at 90ºC. The solutions were then spun on 7‐inch diameter non‐stick disks, allowed to dry, and conditioned at 23ºC and 50% RH before testing. Cassava starch‐glycerol‐beeswax films were successfully produced with a stable film structure at glycerol concentration equal or below 5% (w/w). Addition of glycerol and beeswax did not visually change the color of the films. Increasing glycerol content improved elongation while decreasing tensile strength. Increasing the glycerol concentration from 1.0 to 5.0% increased the water vapor permeability by 150% and addition of beeswax further increased these values by 250%.     

Influence of sn‐1,3‐lipase‐catalysed interesterification on the oxidative stability of soybean oil‐based structured lipids

The oxidative stability of structured lipids (SLs) synthesised by specific sn‐1,3‐lipase catalysed interesterification of soybean oil (SBO) with caprylic acid (CA) in a stirred batch reactor was studied. SLs contained considerable amounts of tocopherol (TOH) isomers, although they lost almost 25% of endogenous TOHs during production. The effects of the addition of different TOH homologues (α, β, γ, δ), ascorbyl palmitate (AP, 200 ppm), lecithin (Le, 1000 ppm), butylated hydroxytoluene (BHT, 100 ppm) and butylated hydroxyanisole (BHA, 100 ppm) on the oxidative stability of SLs were investigated. Induction time (IT) of SBO, determined by the Rancimat method, decreased from 8.4 to 5.8 h at 110 °C after the modification. On the other hand, purified SLs and purified SBO had the same IT due to the tocopherol reduction during silica purification. No significant difference was observed between IT of SLs and SLs plus different α‐tocopherol concentrations (50, 100, 150, 200, 300, 500 and 1000 ppm) (P > 0.05). However, the addition of Le and/or AP significantly improved oxidative stability of purified SLs and SBO. The ternary blend containing δ‐TOH, AP and Le had higher IT than ternary blends of α‐TOH, β‐TOH or γ‐TOH. Furthermore, ternary blend containing BHA, AP and Le had higher IT than ternary blends of BHT, AP and Le. In addition, there was an increase in peroxide value (PV), conjugated diene (CD) content and p‐anisidine value (AV) during oxidation of oils at 60 °C. Antioxidant mixtures of α‐TOH (50 ppm) and δ‐TOH (500 ppm) with AP and Le decreased PV, CD and AV effectively. Copyright © 2006 Society of Chemical Industry     

Shelf‐life extension of fresh‐like ready‐to‐use pear cubes

Minimally processed fruit and vegetables are generally more perishable than the original raw materials due to the injury stresses during preparation that greatly increase tissue respiration and lead to deterioration through various biochemical pathways. In this paper, the effects of low intensity blanching treatments on enzymatic and microbiological stability on the fresh‐like quality of ready‐to‐use pear cubes has been evaluated. Blanching treatments as well as packaging were carried out both in aseptic and in non‐aseptic conditions. The combination of low intensity blanching with superficial enzymatic treatments has been carried out. The results confirm that the combination of a mild heat treatment (3 min at 95 °C) under aseptic conditions is enough to enhance the stability of this minimally processed product with an acceptable reduction in the texture. The superficial treatment with lysozyme did not result in an improvement in the stability of the blanched pear cubes during storage under refrigerated conditions. © 1999 Society of Chemical Industry     

Characterization of the Supermolecular Structure of Polydatin/6‐O‐α‐Maltosyl‐β‐cyclodextrin Inclusion Complex

Polydatin is the main bioactive ingredient in many medicinal plants, such as Hu‐zhang (Polygonum cuspidatum), with many bioactivities. However, its poor aqueous solubility restricts its application in functional food. In this work, 6‐O‐α‐Maltosyl‐β‐cyclodextrin (Malt‐β‐CD), a new kind of β‐CD derivative was used to enhance the aqueous solubility and stability of polydatin by forming the inclusion complex. The phase solubility study showed that polydatin and Malt‐β‐CD could form the complex with the stoichiometric ratio of 1:1. The supermolecular structure of the polydatin/Malt‐β‐CD complex was characterized by ultraviolet–visible spectroscopy (UV), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffractometry (XRD), thermogravimetric/differential scanning calorimetry (TG/DSC), and proton nuclear magnetic resonance (¹H‐NMR) spectroscopy. The changes of the characteristic spectral and thermal properties of polydatin suggested that polydatin could entrap inside the cavity of Malt‐β‐CD. Furthermore, to reasonably understand the complexation mode, the supermolecular structure of polydatin/Malt‐β‐CD inclusion complex was postulated by a molecular docking method based on Autodock 4.2.3. It was clearly observed that the ring B of polydatin oriented toward the narrow rim of Malt‐β‐CD with ring A and glucosyl group practically exposed to the wide rim by hydrogen bonding, which was in a good agreement with the spectral data.     

Impact of dietary fibre‐enriched ready‐to‐eat extruded snacks on the postprandial glycaemic response of non‐diabetic patients

Food intervention is a financially sensible way for prevention and treatment of diabetes. Extruded snack foods are considered high glycaemic products. Our previous research illustrated that postprandial glycaemic responses to snacks are manipulated by altering dietary fibre and starch contents. The current research assessed the effect of psyllium and oat bran on postprandial glycaemia and in vitro digestibility. Addition of psyllium fibre to extruded snack products significantly reduced both the in vitro and in vivo glycaemic responses of products compared to a control snack product recipe. Oat bran inclusion reduced in vitro starch digestibility but not in vivo glycaemic response. The inclusion of oat bran into the snack products appeared to extend the glycaemic response of individuals compared to the control snack, suggesting a possibility of prolonging glucose release and potentially affecting satiety responses. The positive effect in attenuating glucose response means that psyllium fibre could be a target for inclusion by the snack food industry to effectively manipulate postprandial glucose response of individuals.