TEXTURE ANALYSIS OF CHEDDAR CHEESE MADE FROM ULTRAFILTERED MILK

The textural properties of Cheddar cheese made from ultrafiltered milk were assessed. Cheddar cheeses were prepared from 1.5- and 2.0-fold concentrated milk and ripened for three months. Textural characteristics of the UF cheeses were compared to control and commercial Cheddar cheeses by sensory and instrumental measures. The texture of cheese made from UF milk differed from the control commercial Cheddar cheeses. According to the trained sensory panel, the UF cheeses were harder and more rubbery, crumbly, chewy and grainy than the control and commercial Cheddar cheeses (P <0.01). The texture profile analysis (TPA), conducted using the Instron, did not correspond to the sensory measurements nor was it successful in discriminating among the cheese samples. Lack of agreement between the sensory and instrumental tests was attributed to differences in the testing conditions and procedures of the two methods. Instrumental tests should be validated against sensory measures in order to be useful as measures of palatability. Consumer preferences for the commercial, control and UF Cheddar cheeses were significantly different (P < 0.01), the UF cheeses being less preferred in terms of flavor, texture and overall acceptability.     

Impact of fat reduction on flavor and flavor chemistry of Cheddar cheeses

A current industry goal is to produce a 75 to 80% fat-reduced Cheddar cheese that is tasty and appealing to consumers. Despite previous studies on reduced-fat cheese, information is critically lacking in understanding the flavor and flavor chemistry of reduced-fat and nonfat Cheddar cheeses and how it differs from its full-fat counterpart. The objective of this study was to document and compare flavor development in cheeses with different fat contents so as to quantitatively characterize how flavor and flavor development in Cheddar cheese are altered with fat reduction. Cheddar cheeses with 50% reduced-fat cheese (RFC) and low-fat cheese containing 6% fat (LFC) along with 2 full-fat cheeses (FFC) were manufactured in duplicate. Cheeses were ripened at 8°C and samples were taken following 2 wk and 3, 6, and 9 mo for sensory and instrumental volatile analyses. A trained sensory panel (n = 10 panelists) documented flavor attributes of cheeses. Volatile compounds were extracted by solid-phase microextraction or solvent-assisted flavor evaporation followed by separation and identification using gas chromatography-mass spectrometry and gas chromatography-olfactometry. Selected compounds were quantified using external standard curves. Sensory properties of cheeses were distinct initially but more differences were documented as cheeses aged. By 9 mo, LFC and RFC displayed distinct burnt/rosy flavors that were not present in FFC. Sulfur flavor was also lower in LFC compared with other cheeses. Forty aroma-active compounds were characterized in the cheeses by headspace or solvent extraction followed by gas chromatography-olfactometry. Compounds were largely not distinct between the cheeses at each time point, but concentration differences were evident. Higher concentrations of furanones (furaneol, homofuraneol, sotolon), phenylethanal, 1-octen-3-one, and free fatty acids, and lower concentrations of lactones were present in LFC compared with FFC after 9 mo of ripening. These results confirm that flavor differences documented between full-fat and reduced-fat cheeses are not due solely to differences in matrix and flavor release but also to distinct differences in ripening biochemistry, which leads to an imbalance of many flavor-contributing compounds.     

Comparison of differences between lexicons for descriptive analysis of Cheddar cheese flavour in Ireland,New Zealand,and the United States of America

Flavour lexicons for cheese provide a way to document cheese flavour for both research and marketing. The objective of this study was to compare differences and similarities in three independently developed sensory languages for Cheddar cheese flavour at three different locations (Ireland, New Zealand, United States of America) using an international selection of Cheddar cheeses. Twelve Cheddar cheeses (four from each country) were evaluated by the three panels using the respective sensory languages. Sensory space patterns obtained by principal component analysis were consistent between the three sites indicating that the overall differentiation of the cheeses by each panel was similar. The key flavour characteristics among the cheeses were described by different attributes. Cheeses were grouped by each site by country of origin suggesting international differences in Cheddar cheese flavour. Cross-cultural differences can exist in sensory language and perception, but highly trained panels using standardized, representative languages can provide comparable results.     

Cheddar Cheese Texture Related to Salt Release During Chewing, Measured by Conductivity—Preliminary Study

Salt is dispersed throughout the matrix of Cheddar cheese. We hypothesized that the manner in which salt is released into the mouth during chewing may be directly related to cheese breakdown, and hence texture. Conductivity (used as the best estimate of salt) in the mouth was continually monitored during consumption of a range of Cheddars. Characteristics of conductivity changes varied between cheeses. Relationships were observed between such changes and instrumental and sensory measures of texture. This preliminary study, based on responses of a single subject, suggests the potential of salt release data to help distinguish texture in cheese.     

The effect of aging on low-fat, reduced-fat, and full-fat Cheddar cheese texture

This study investigated the effects of aging and fat content on the texture of Cheddar cheese, both mechanical and sensory aspects, over a 9-mo aging period. Cheeses of 6, 16, and 33% fat were tested at 0.5, 3, 6, and 9 mo of aging. Cheeses were evaluated by a trained sensory panel using an established texture lexicon as well as instrumental methods, which were used to probe cheese structure. Sensory analysis showed that low-fat cheeses were differentiated from full-fat cheeses by being more springy and firm and this difference widened as the cheeses aged. In addition, full-fat cheeses broke down more during chewing than the lower fat cheeses and the degree of breakdown increased with aging. Mechanical properties were divided by magnitude of deformation during the test and separated into 3 ranges: the linear viscoelastic region, the nonlinear region, and fracture point. These regions represent a stress/strain response from low to high magnitude, respectively. Strong relationships between sensory terms and rheological properties determined in the linear (maximum compliance) and nonlinear (critical stress and strain and a nonlinear shape factor) regions were revealed. Some correlations were seen with fracture values, but these were not as high as terms related to the nonlinear region of the cheeses. The correlations pointed to strain-weakening behavior being the critical mechanical property. This was associated with higher fat content cheeses breaking down more as strain increased up to fracture. Increased strain weakening associated with an increase in fat content was attributed to fat producing weak points in the protein network, which became initiation sites for fracture within the structure. This suggests that fat replacers need to serve this functional role.     

Vane Rheometry for Textural Characterization of Cheddar Cheeses: Correlation with Other Instrumental and Sensory Measurements

The relationship between instrumental (vane method, texture profile analysis (TPA), uniaxial compression) and sensory texture measurements of Cheddar cheeses was investigated. A Haake VT 550 viscotester equipped with a four-bladed vane rotor was used for the vane test. Instrumental TPA was performed with a TA.XT2 Texture Analyser, and compression variables were calculated from TPA data. Vane parameters were significantly correlated with respective variables of compression and TPA (r=0.56-0.91), and sensory tests (r=0.54-0.88). Multivariate analysis indicated that seven sensory attributes of ten commercial Cheddar cheeses were satisfactorily predicted (calibration regression coefficient,R_cal >0.62) by variables of the vane, uniaxial compression and TPA tests. In particular, cheese firmness and cohesiveness evaluated by sensory panel were well described by vane stress and apparent strain. The results validate the vane method as an alternative to the existing cheese testing methods for rapid evaluation of cheese texture.     

Enhanced nutty flavor formation in cheddar cheese made with a malty Lactococcus lactis adjunct culture

Nutty flavor in Cheddar cheese is desirable, and recent research demonstrated that 2- and 3-methyl butanal and 2-methyl propanal were primary sources of nutty flavors in Cheddar. Because malty strains of Lac-tococcus lactis (formerly Streptococcus lactis var. malti-genes) are characterized by the efficient production of these and other Strecker aldehydes during growth, this study investigated the influence of a malty L. lactis adjunct culture on nutty flavor development in Cheddar cheese. Cheeses made with different adjunct levels (0, 10⁴ cfu/mL, and 10⁵ cfu/mL) were ripened at 5 or 13°C and analyzed after 1 wk, 4 mo, and 8 mo by a combination of instrumental and sensory methods to characterize nutty flavor development. Cheeses ripened at 13°C developed aged flavors (brothy, sulfur, and nutty fla-vors) more rapidly than cheeses held at 5°C. Additionally, cheeses made with the adjunct culture showed more rapid and more intense nutty flavor development than control cheeses. Cheeses that had higher intensities of nutty flavors also had a higher concentration of 2/3-methyl butanal and 2-methyl propanal compared with control cheeses, which again confirmed that these compounds are a source of nutty flavor in Cheddar cheese. Results from this study provide a simple methodology for cheese manufacturers to obtain consistent nutty flavor in Cheddar cheese.     

Free oil and rheology of Cheddar cheese containing fat globules stabilized with different proteins

Cheddar cheese was manufactured from recombined milk containing fat globules coated with alpha(s1)-CN (casein), alpha(s2)-CN, beta-CN, kappa-CN, alpha-lactalbumin, or beta-lactoglobulin. The effect of the coating on fat globule structure, free oil formation, and cheese rheology was investigated to determine if globule coating affected the physical structure of cheese. Fat globule size and shape were determined in cheese using confocal laser scanning microscopy, and the rheological properties measured by uniaxial compression after maturation for 35 and 70 d. Fat globules were elongated and clustered in the control cheese coated with native membrane material and in cheese where the globules were coated with alpha(s2)-CN, but were more circular and distinct than all others. Cheese containing globules coated with alpha(s2)-CN fractured at a lower strain and with a lower stress than other experimental cheeses. Free oil decreased in cheese as the stress at fracture of the cheese protein matrix increased. Strain at fracture increased as pH increased from 4.7 to 5.3. There was no correlation between free oil and fat globule circularity. Cheddar cheese aroma was not evident in experimental cheeses.     

Starter strain related effects on the biochemical and sensory properties of Cheddar cheese

A detailed investigation was undertaken to determine the effects of four single starter strains, Lactococcus lactis subsp. lactis 303, Lc. lactis subsp. cremoris HP, Lc. lactis subsp. cremoris AM2, and Lactobacillus helveticus DPC4571 on the proteolytic, lipolytic and sensory characteristics of Cheddar cheese. Cheeses produced using the highly autolytic starters 4571 and AM2 positively impacted on flavour development, whereas cheeses produced from the poorly autolytic starters 303 and HP developed off-flavours. Starter selection impacted significantly on the proteolytic and sensory characteristics of the resulting Cheddar cheeses. It appeared that the autolytic and/or lipolytic properties of starter strains also influenced lipolysis, however lipolysis appeared to be limited due to a possible lack of availability or access to suitable milk fat substrates over ripening. The impact of lipolysis on the sensory characteristics of Cheddar cheese was unclear, possibly due to minimal differences in the extent of lipolysis between the cheeses at the end of ripening. As anticipated seasonal milk supply influenced both proteolysis and lipolysis in Cheddar cheese. The contribution of non-starter lactic acid bacteria towards proteolysis and lipolysis over the first 8 months of Cheddar cheese ripening was negligible.     

Key aroma compounds identified in Cheddar cheese with different ripening times by aroma extract dilution analysis,odor activity value,aroma recombination,and omission

To determine the odor-active compounds in Cheddar cheeses with different ripening times (6, 10, and 14 mo), 39 potent odorants of Cheddar cheeses were identified with a flavor dilution factor range between 1 and 512 by aroma extract dilution analysis. To further determine their contribution to the overall aroma profile of Cheddar cheeses, odor activity values of 38 odorants with flavor dilution factors ≥1 were calculated. A Cheddar cheese matrix was developed to determine the concentrations and the odor thresholds of these key aroma compounds. The result of the aroma recombinant experiment prepared by mixing the key aroma compounds in the concentrations in which they occurred in Cheddar cheeses showed that the overall aroma profile of the recombinant sample was very similar to that of Cheddar cheese. The main different compounds in Cheddar cheese with different ripening time were acetic acid, butanoic acid, dimethyl trisulfide, methional, hexanal, (E)-2-nonenal, acetoin, 1-octen-3-one, δ-dodecalactone, furaneol, hexanoic acid, heptanal, and ethyl caproate. This study could provide important information for researching and developing Cheddar cheese–related products.     

The key aroma compounds and sensory characteristics of commercial Cheddar cheeses

To study the key aroma components and flavor profile differences of Cheddar cheese with different maturity and from different countries, the flavor components of 25 imported commercial Cheddar cheese samples in the China market were determined by gas chromatography-mass spectrometry. The quality and quantity of 40 flavor compounds were analyzed by gas chromatography-olfactometry among 71 aroma compounds determined by gas chromatography-mass spectrometry. Combined with odor activity value calculation, principal component analysis (PCA) was conducted to analyze the relationship among 26 flavor compounds with odor activity values >1 and the maturity of Cheddar cheese. The PCA results showed significant differences between the group of mild Cheddar cheese and the groups of medium Cheddar cheese and mature Cheddar cheese, and no significant differences were observed between medium Cheddar cheese and mature Cheddar cheese. According to the results of PCA and consumers' preference test, representative Cheddar cheese samples with different ripening times were selected for the flavor profile analysis. Partial least squares regression analysis was conducted to obtain the relationship between sensory properties and flavor compounds of different Cheddar cheeses. Based on partial least squares regression analysis, 1-octen-3-one, hexanal, acetic acid, 3-methylindole, and acetoin were positively correlated with milky, sour, and yogurt of mild Cheddar cheese. Dimethyl trisulfide, phenylacetaldehyde, ethyl caproate, octanoic acid, and furaneol and other compounds were positively correlated with fruity, caramel, rancid, and nutty notes of the medium and mature Cheddar cheeses.     

Effect of zinc fortification on Cheddar cheese quality

Zinc-fortified Cheddar cheese containing 228 mg of zinc/kg of cheese was manufactured from milk that had 16 mg/kg food-grade zinc sulfate added. Cheeses were aged for 2 mo. Culture activity during cheese making and ripening, and compositional, chemical, texture, and sensory characteristics were compared with control cheese with no zinc sulfate added to the cheese milk. Compositional analysis included fat, protein, ash, moisture, zinc, and calcium determinations. The thiobarbituric acid (TBA) assay was conducted to determine lipid oxidation during aging. Texture was analyzed by a texture analyzer. An untrained consumer panel of 60 subjects evaluated the cheeses for hardness, off-flavors, appearance, and overall preference using a 9-point hedonic scale. Almost 100% of the zinc added to cheese milk was recovered in the zinc-fortified cheese. Zinc-fortified Cheddar cheese had 5 times more zinc compared with control cheese. Zinc-fortified cheese had higher protein and slightly higher fat and ash contents, whereas moisture was similar for both cheeses. Zinc fortification did not affect culture activity during cheese making or during the 2-mo aging period. The TBA value of control cheese was higher than that of zinc-fortified cheese at the end of ripening. Although zinc-fortified cheese was harder as determined by the texture analyzer, the untrained consumer panel did not detect differences in the sensory attributes and overall quality of the cheeses. Fortification of 16 mg/kg zinc sulfate in cheese milk is a suitable approach to fortifying Cheddar cheese without changing the quality of Cheddar cheese.