首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 109 毫秒
1.
The aim of this study was to investigate the effect of elastane linear density, thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments. Fabric samples were produced using elastane core-spun cotton yarns both in the warp and weft. The elastane linear density, fabric thread density, and weave float size were used as input variables while fabric contraction, subgarment pressure, fabric stretch, and recovery were taken as response variables. Two different elastane linear densities, i.e. 44 and 78 dtex, two different thread densities, and three different weave designs, i.e. 1/1 plain, 2/2 z-twill, and 3/3 z-twill were used. The results of fabric samples were analyzed in Minitab statistical software. The coefficients of determinations (R-sq values) of the regression equations showed good prediction ability of the developed statistical models. The findings of the study may be helpful in deciding appropriate manufacturing specifications of bi-stretch fabrics to attain specific stretch, recovery, and compression properties.  相似文献   

2.
Elastic structures are preferred for improving the elasticity and recovery properties of denim fabrics. With the intention of improving comfort during body movements in denim jeans, 10–35% elasticity is required. In this study, the effect of the composition of double-core (dual-core) and core-spun weft yarns and weft density on the mechanical properties of denim fabrics was investigated. For this purpose, different core materials were used in the production of elastic yarns. The sheath material was cotton for all yarn types. Yarn samples were spun with the same yarn count and twist coefficient. 100% cotton Ne 8/1 Ring slub warp yarns were used as warp yarn while double-core and core-spun yarns were used as weft yarns in weaving. The weaving process was performed with three different weft density values (16, 22, and 28 weft /cm) and the other production parameters were kept constant. Twill 3/1 woven fabrics were treated according to standard denim finishing procedures. After domestic washing processes, mechanical properties of the samples were tested and statistically evaluated.  相似文献   

3.
Seersucker is a thin and puckered fabric used to make clothing for spring. Due to its specific structure, this fabric is held away from the skin when worn, facilitating heat dissipation and air circulation. Seersucker is produced by slack tension weaving using two warp beams. Due to the use of two beams, such fabrics were not possible to weave on conventional (with single warp beam) weaving machines. Additional twin beams arrangement was required for such weaving. The objective of the current study is to produce seersucker fabric on conventional looms using a single warp beam. For achieving this objective, two types of weft yarn: 100% cotton yarns and blended yarns of cotton and elastane (95.67% cotton and 4.33% Lycra) are used in groups. The viscoelastic behaviour of the produced fabric samples is tested using ASTM standard D3107-07. Instant deformation, elastic recovery, creep and relaxation were recorded and plotted as function of Lycra % age.  相似文献   

4.
Lateral compression is one of the most important mechanical aspects of fabrics, which reflects their handle. Fabric compressional features depend on the compressional characteristics of constituent yarns and the fabric structure. In order to consider the effect of fabric structural parameters on its compressional properties, woven fabrics with five different weave patterns (plain, hopsack 2/2, twill 2/2, twill 3/1, warp rib 2/2) were produced with three different nominal weft densities (12, 15, 18 cm?1). The compressional properties of produced fabrics were evaluated at different pressure values using a conventional fabric thickness tester. It was observed that increasing the weft density leads to decrease in the dissipated compression energy as well as the compressibility of the fabric, while the thickness recovery of the fabric increases. Moreover, the plain woven fabric exhibited the lowest dissipated compression energy and compressibility, while the highest thickness recovery. Besides, at the low pressure level, the fabrics with the lower weft densities demonstrate the higher thickness. By increase in the pressure level, the fabric thickness decreases by decreasing the weft density.  相似文献   

5.
In this study, using of nettle fiber, a natural fiber, in towel production and the selected performance properties were examined. Six different towel samples were produced in the study. Ground warp yarns of all towels are cotton. Three different raw materials as weft yarns and two different raw materials as pile warp yarns were selected. The yarn containing nettle fiber (70% cotton/30% nettle) was used in weft direction. The performance parameters such as water absorbency, softness, quick drying of samples, and antibacterial activity for two bacteria were investigated for before and after household washing. As a result, it was seen that the nettle fiber can be used as an alternative in towel industry.  相似文献   

6.
This paper is part of a series dealing with the application of the extended warp‐knitting process for the production of textile fabrics for composites. Further studies will examine the properties of thermoplastic composites and textile reinforced concrete made of stitch‐bonded multi‐plies. It is known that knitting yarn pattern and knitting yarn tension during fabric production affect the properties of stitch‐bonded multi‐plies and composites made thereof. This paper describes the effects of those two parameters on the fabric as produced with the extended stitch‐bonding process. It can be shown in which way pattern and yarn tension can be chosen to reduce compression of the warp threads in the fabric as well as to avoid unwanted displacement of threads caused by handling.  相似文献   

7.
为了得到一种脱散性较小、弹性较好的新型结构血管外支架,在小口径高速圆筒经编机上织制了经编结构血管外支架,并对支架的轴向拉伸性能及径向压缩性能进行了测试,同时分析了支架口径的变化对其性能的影响。  相似文献   

8.
芦山纱织物表面均匀分布稳定清晰的纱孔,呈现若隐若现的亮点而独具特色。文章对芦山纱独特的二绞二罗组织的结构进行了分析,研究了织物表面的细小纱孔和独特亮点等特征,并基于芦山纱以基础组织为地、罗组织为花的组织特征,进一步采用棉纱作经纬原料,以变化斜纹组织为地组织,三绞三罗组织为提花组织,研制了三绞三罗织物。根据不同经纬线密度的配置试织试样,对其进行织物悬垂性、折皱回复性、拉伸性能的测试。结果表明,经纬原料线密度配置与罗组织分布对织物的抗折皱性和拉伸强力具有一定的影响。  相似文献   

9.
薄型精纺毛织物综合服用性能与结构参数的关系   总被引:2,自引:0,他引:2       下载免费PDF全文
姜为青 《纺织学报》2006,27(11):86-89
 通过对薄型精纺毛织物经纬向拉伸强力、折皱回复角、悬垂系数、经纬向抗弯长度、织物起毛起球性能的测试,并运用Q型聚类分析方法对所测指标与织物的经纬纱线密度、经纬密度、经纬纱捻度、面密度、厚度等结构参数进行分析,得出性能指标与织物结构参数之间的关系。研究表明原料、组织相同,经纬纱线密度相近的薄型毛织物综合服用性能接近;织物的原料对薄型毛织物的服用性能影响最大;织物的面密度、厚度对薄型精纺毛织物综合服用性能影响较小。  相似文献   

10.
This paper aims to analyse the effect of coating, fabric layers and structural parameters on the impact resistance behaviour of warp knitted spacer fabrics used for protective clothing. For this purpose, six warp knitted spacer fabrics were produced by varying thickness and mesh structure and were coated with a silicone substrate. A drop-weight impact tester was used to determine the impact resistance characteristics of the samples. The results indicate that, the impact resistance properties of warp knitted spacer fabrics can be improved considerably by coating as reducing approximately 10 kN of the peak transmitted force. Also, the structural parameters such as fabric thickness and mesh structure have significant effects on impact resistance behaviour of the samples. The fabrics with higher thickness and smaller size mesh on the outer layers have better impact resistance properties. Additionally, the lamination of spacer fabrics can effectively improve the impact resistance characteristics of the spacer fabrics. The warp knitted spacer fabrics can be used as an energy absorbing material for body protection by varying their structural parameters, fabric lamination and/or by coating.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号