Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

Contribution of European research to risk analysis

The European Commission's, Quality of Life Research Programme, Key Action 1—Health, Food & Nutrition is mission-oriented and aims, amongst other things, at providing a healthy, safe and high-quality food supply leading to reinforced consumer confidence in the safety of European food. Its objectives also include the enhancing of the competitiveness of the European food supply. Key Action 1 is currently supporting a number of different types of European collaborative projects in the area of risk analysis. The objectives of these projects range from the development and validation of prevention strategies including the reduction of consumers risks; development and validation of new modelling approaches; harmonization of risk assessment principles, methodologies, and terminology; standardization of methods and systems used for the safety evaluation of transgenic food; providing of tools for the evaluation of human viral contamination of shellfish and quality control; new methodologies for assessing the potential of unintended effects of genetically modified (genetically modified) foods; development of a risk assessment model for Cryptosporidium parvum related to the food and water industries; to the development of a communication platform for genetically modified organism, producers, retailers, regulatory authorities and consumer groups to improve safety assessment procedures, risk management strategies and risk communication; development and validation of new methods for safety testing of transgenic food; evaluation of the safety and efficacy of iron supplementation in pregnant women; evaluation of the potential cancer-preventing activity of pro- and pre-biotic ('synbiotic') combinations in human volunteers. An overview of these projects is presented here.     

低温带皮菜籽粕微粉的不同粒级部分的功能特性

为研究低温带皮菜籽粕微粉的不同粒级部分的功能特性,以经低温脱脂的带皮菜籽粕为原料,经微粉碎后筛分成212~425μm、150~212μm和106~150μm的3个不同粒级的微粉样品,检测这些样品的吸水性、吸油性、乳化性和乳化稳定性、蛋白质体外消化率。结果表明:1 3个不同粒级的微粉样品之间的粗纤维含量存在显著差异,表明三者的结构组成成分有一定差异。23个微粉样品的乳化活性和乳化稳定性随粒度级别的减小而显著增加(P0.01)。33个微粉样品的蛋白质体外消化率随粒度级别的减小而显著增加(P0.01)。4不同粒级带皮菜籽粕微粉样品的吸水性与吸油性受其结构组成物质不同和粒度的双重影响,与粒度的相关性不明显。     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Analysis for organic residues from aids to polymerization used to make plastics intended for food contact

Polymers intended for food contact use have been analysed for organic residues which could be attributed to a range of substances employed as polymerization aids (e.g. initiators and catalysts). A wide range of polymers was extracted with solvents and the extracts analysed by gas chromatography-mass spectrometry (GC-MS). The overwhelming majority of substances identified were not derived from aids to polymerization but were oligomers, additives and adventitious contaminants. However, a small number of substances were identified as initiator residues. These included tetramethylsuccinonitrile (TMSN) which was observed in two polymers and it derived from recombination of two azobisisobutyronitrile (AIBN) initiator radicals. Methyl benzoate, benzoic acid, biphenyl and phenyl benzoate were detected in one poly(methyl methacrylate) sample and in two polyvinylchlorides and they are thought to be derived from benzoyl peroxide initiator. TMSN was subsequently targeted for analysis of poly-(methyl methacrylate) plastics using proton nuclear magnetic resonance spectrometry (¹     

Tests of potential functional barriers for laminated multilayer food packages. Part II: Medium molecular weight permeants

Experiments were performed to characterize the kinetics of the permeation of different medium molecular weight model permeants: bisphenol A, warfarin and anthracene, from liquid paraffin, through a surrogate potential functional barrier (25 microns-thick orientated polypropylene--OPP) into the food simulants olive oil and 3% (w/v) acetic acid. The characterization of permeation kinetics generally observed the permeation models previously reported to explain the experimental permeation results obtained for a low molecular weight group of model permeants. In general, the model permeants exhibited behaviour consistent with their relative molecular weights with respect to (a) the time taken to attain steady-state permeation into the food simulant in which they were more soluble, (b) their subsequent steady-state permeation rates, and (c) their partition between liquid paraffin and the OPP membrane.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

The Ministry of Environmental Protection Issued "Feasible Technology Guidelines for Pollution Prevention and Control in Wood Pulping Process of the Paper Industry (Trial)" and Two Other Guiding Technical Documents

On December 27t＂, 2013, the Ministry of Environmenta Protection announced that, in order to implement ＂The Environmental Protection Law of the People＇ s Republic of China＂, improve the working system in environmenta protection technologies, and promote technologica advancement in pollution prevention, the Ministry of Environmental Protection sponsored the formulation of three guiding technical documents including ＂Feasible Technology Guidelines for Pollution Prevention and Contro n Wood Pulping Process of the Paper Industry （Trial）＂     

1~(st) Intelli-Tissue~ EcoEc Tissue Machine Supplied by PMP Group Successfully Put into Operation in China

正On April 29th,2014,Intelli-Tissue EcoEc tissue machine supplied by PMP Group successfully put into operation at Hebei Xuesong Paper Co.,Ltd.,this is the first such kind of paper machine of PMP Group in China.     

The Third Phase of Dongshun Industrial Park, Dongshun Group Was Completed and Put into Operation

On November 30th, 2013, the completion and operation ceremony of the third phase of Dongshun Industrial Park was held in the Dongshun Industrial Park, Dongping Economic Development Zone, Shandong     

Listen to downstream & search for innovation

正Nowadays,textile enterprises are all taking efforts in transformation and upgrading,like improving producing capacity and optimizing production structure to face market downturn.It claimed a higher request to the standard of textile equipments.In the upcoming of ITMA ASIA+CITME 2014exhibition,this magazine have interviewed several branch associations and a series of relative enterprises,to summarize industrial developing status     

Focus on China's Paper Industry

In the English section of this issue, 〈China Paper Newsletters〉 will introduce ＂National Development and Reform Commission Issued Announcement for Selection of Major Preliminary Research Projects for the ＇13th Five-Year Plan＇＂, ＂2013 Annual Report of China＇s Paper Industry＂, and news of projects and other policies.     

TAPPI JOURNAL 2014年第9期目次

正~~     

Beryllium in food and drinking water - a summary of available knowledge

In an overall evaluation of the situation published by IARC in 1993, beryllium and beryllium compounds are identified as carcinogens to humans. This prompted the initiation of this study on beryllium which reviews the situation up to 1998 on the aspects: properties and applications, toxicity, analytical procedures for food and drinking water, reference materials, occurrence in food and drinking water and estimates of daily dietary exposure. Special emphasis is put on analytical aspects and levels of beryllium in food and drinking water.     

High pressure induced hydrolysis at C-terminus of peptide derivatives yielding bioactive peptides

If the cyclization of a peptide is associated with a volume reduction, pressure should displace the reaction equilibrium in the direction of a lower volume. Here, results in model solutions are considered, showing a pressure-accelerated transformation of linear dipeptides with reactive C-terminals. The theorised cyclization of dipeptides after hydrolysis of the C-terminal amide H–Leu–Gly–NH₂ or methyl ester groups H–Leu–Gly–OMe and H–Leu–Gly–OtBu was found to be significantly accelerated during application of combined pressure/temperature treatments up to 600–800 MPa and 60–80 °C. Yields were dependent on the nature of the reactive site. Products of those reactions were identified as H–Leu–Gly–OH and cyclo(Leu–Gly), which is a bioactive dipeptide. The dipeptide amide yielded only trace concentrations of the amino acid H–Leu–OH and the linear dipeptide. Steric hindrance prevented a pressure induced cyclisation of a dipeptide with tert-butyl ester at the C-terminus, and only the linear peptide H–Leu–Gly–OH was formed.     

Food allergy—towards predictive testing for novel foods

The risks associated with IgE-mediated food allergy highlight the need for methods to screen for potential food allergens. Clinical and immunological tests are available for the diagnosis of food allergy to known food allergens, but this does not extend to the evaluation, or prediction of allergenicity in novel foods. This category includes foods produced using novel processes, genetically modified (GM) foods, and foods that might be used as alternatives to traditional foods. Through the collation and analysis of the protein sequences of known allergens and their epitopes, it is possible to identify related groups which correlate with observed clinical cross-reactivities. 3-D modelling extends the use of sequence data and can be used to display eptiopes on the surface of a molecule. Experimental models support sequence analysis and 3-D modelling. Observed crossreactivities can be examined by Western blots prepared from native 2-D gels of a whole food preparation (e.g. hazelnut, peanut), and common proteins identified. IgEs to novel proteins can be raised in Brown Norway rat (a high IgE responder strain), and the proteins tested in simulated digest to determine epitope stability. Using the CSL serum bank, epitope binding can be examined through the ability of an allergen to cross-link the high affinity IgE receptor and thereby release mediators using in vitro cell-based models. This range of methods, in combination with data mining, provides a variety of screening options for testing the potential of a novel food to be allergenic, which does not involve prior exposure to the consumer.     

Measurement of paralytic shellfish toxins in molluscan extracts: comparison of the microtitre plate saxiphilin and sodium channel radioreceptor assays with mouse bioassay, HPLC analysis and a commercially available cell culture assay

This study compared five methods of measuring paralytic shellfish toxins (PSTs) including the long-used mouse lethality bioassay, a commercially available cell culture test (MIST ® Quantification kit), HPLC analysis, and two newly developed radioreceptor assays utilizing mammalian sodium channels and saxiphilin. Methods were challenged with toxic shellfish extracts prepared according to the AOAC official method. The best correlations between predicted toxicity values being 0.9 or better, were those between HPLC analysis when compared with both radioreceptor assays and the mouse lethality bioassay, as well as that between the saxiphilin and the sodium channel radioreceptor assays. In all cases, statistically significant correlations existed between the toxicity measurements of the same extracts. The ratios between some methods were not unitary as measured by the slopes of the regression lines used for correlation analyses. HPLC analysis predicted more toxicity than all of the bioassays. The saxiphilin assay underestimated toxicity relative to the mouse bioassay, the MIST ® kit determinations and the sodium channel assay. The sodium channel assay predicted there to be less toxicity than the mouse bioassay and the MIST ® kit. Of all of the techniques used, the MIST ® kit correlation with the mouse bioassay was nearest to one. Each method possesses different virtues and it may be that a multi-method approach would harness the benefits of each method for various aspects of a shellfish testing regime.     

Honey melanoidins: Analysis of the compositions of the high molecular weight melanoidins exhibiting radical-scavenging activity

Size-exclusion chromatography (SEC) and activity-guided fractionation of honeys allowed the isolation of high molecular weight brown compounds, ranging in size from 66 to 235 kDa that exhibited peroxyl radical-scavenging activity. Their concentrations, antioxidant activity and degree of browning increased after heat-treatment of honeys, suggesting that they represent melanoidins. Chemical analysis of melanoidins demonstrated the presence of proteins, polyphenols and oligosaccharides. Heat-treatment caused an increased incorporation of phenolics into high molecular weight melanoidins and drastically decreased the protein content in these fractions with a concomitant appearance of high molecular weight protein–polyphenol complexes of reduced solubility. LC–ESI–MS demonstrated the presence of oligosaccharide moieties, supporting the postulated origin of melanoidins. The changes in the phenolic content of melanoidins from heated honeys were strongly correlated with their oxygen radical absorbance capacity (ORAC) values (R = 0.75, p < 0.0001), indicating that polyphenols contribute to the antioxidant activity of melanoidins. In summary, honey melanoidins are multi-component polymers consisting of protein–polyphenol–oligosaccharide complexes. A direct interaction between polyphenols and melanoidins resulted in a loss or gain of function for melanoidin antioxidant activity.     

发酵时间对水豆豉理化特性和MCF-7人乳腺癌细胞体外抑制作用的影响

水豆豉是一种短时间发酵的黄豆制品,采用理化试验和癌细胞体外试验,通过p H、酸度、总菌数、氨基酸态氮含量、铵态氮含量、γ-谷氨酰转肽酶(γ-GTP)活性、感官评价、MTT试验和RT-PCR,评价不同发酵时间水豆豉的理化特性和体外抑制作用。随着发酵时间的增加,p H值和总菌数增加,发酵48 h水豆豉的蛋白质含量、酸度、γ-GTP和活性大豆异黄酮(大豆黄素和金雀异黄素)含量都比其他发酵时间水豆豉高,在感官评价上48 h发酵的水豆豉也优于其他发酵时间的水豆豉。48 h发酵的水豆豉也具有对MCF-7人乳腺癌细胞最强的生长抑制作用,且48 h发酵水豆豉处理后的MCF-7细胞的Bax,caspase 3,9基因的表达强于其他发酵时间的水豆豉,Bcl-2基因则弱于其他发酵时间的水豆豉。结果显示48 h发酵的水豆豉具有最好的理化品质和体外抗癌效果。研究结果为改善水豆豉生产工艺提供理论支持。