Proteolysis texture and microstructure of low‐fat Tulum cheese affected by exopolysaccharide‐producing cultures during ripening

The objective of the study was to determine the effects of exopolysaccharide (EPS)‐producing or non‐EPS‐producing starters on proteolysis, physical and microstructural characteristics of full‐fat or low‐fat Tulum cheeses during ripening. For this purpose, Tulum cheese was manufactured using full‐ or low‐fat milk with EPS‐producing and non‐EPS‐producing starter cultures. Chemical composition, proteolysis, texture profiles and microstructure of the cheeses were studied during 90 days of ripening. Urea‐PAGE of water‐insoluble and RP‐HPLC peptide profiles of water‐soluble fractions of the cheeses showed that the use of starters resulted in different degradation patterns in all cheeses during ripening. Although β‐casein exhibited similar degradation patterns in all cheeses, small differences are present in α_s1‐casein degradation during ripening. Reducing fat in Tulum cheese changed the RP‐HPLC peptide profile of the cheeses. The use of EPS‐producing cultures improved the textural characteristics and changed the microstructure and proteolysis of low‐fat Tulum cheese.     

Reduced-fat Cheddar cheese from a mixture of cream and liquid milk protein concentrate

Reduced-fat Cheddar cheese (RFC) was manufactured from standardized milk (casein/fat, C/F ˜ 1.8), obtained by (1) mixing whole milk (WM) and skim milk (SM) (control) or (2) mixing liquid milk protein concentrate (LMPC) and 35% fat cream (experimental). The percentage yield, total solid (TS) and fat recoveries in the experimental RFC were 22.0, 63.0 and 89.5 compared to 9.0, 50.7 and 87.0 in the control RFC, respectively. The average % moisture, fat, protein, salt and lactose were 40.7, 15.3, 32.8, 1.4 and 0.07%, respectively, in the experimental cheese and 39.3, 15.4, 33.0, 1.3 and 0.10%, respectively, in the control cheese. No growth of nonstarter lactic acid bacteria (NSLAB) was detected in the control or the experimental cheeses up to 3 months of ripening. After 6 months of ripening, the experimental cheese had 10⁷ cfu NSLAB/g compared to 10⁶ cfu/g in the control. The control cheese had higher levels of water-soluble nitrogen (WSN) and total free amino acids after 6 months of ripening than the experimental cheese. Sensory analysis showed that the experimental cheeses had lower intensities of milk fat and fruity flavours and decreased bitterness but higher intensities of sulphur and brothy flavours than in the control cheese. The experimental cheeses were less mature compared to the control after 270 days of ripening. It can be concluded from the results of this study that LMPC can be used in the manufacture of RFC to improve yield, and fat and TS recovery. However, proteolysis in cheese made with LMPC and cream is slower than that made with WM and SM.     

Texture of low-fat Iranian White cheese as influenced by gum tragacanth as a fat replacer

The effect of different concentrations of gum tragacanth on the textural characteristics of low-fat Iranian White cheese was studied during ripening. A batch of full-fat and 5 batches of low-fat Iranian White cheeses with different gum tragacanth concentrations (without gum or with 0.25, 0.5, 0.75, or 1 g of gum/kg of milk) were produced to study the effects of fat content reduction and gum concentration on the textural and functional properties of the product during ripening. Cheese samples were analyzed with respect to chemical, color, and sensory characteristics, rheological parameters (uniaxial compression and small-amplitude oscillatory shear), and microstructure. Reducing the fat content had an adverse effect on cheese yield, sensory characteristics, and the texture of Iranian White cheese, and it increased the instrumental hardness parameters (i.e., fracture stress, elastic modulus, storage modulus, and complex modulus). However, increasing the gum tragacanth concentration reduced the values of instrumental hardness parameters and increased the whiteness of cheese. Although when the gum concentration was increased, the low-fat cheese somewhat resembled its full-fat counterpart, the interaction of the gum concentration with ripening time caused visible undesirable effects on cheese characteristics by the sixth week of ripening. Cheeses with a high gum tragacanth concentration became very soft and their solid texture declined somewhat.     

The effect of using an exopolysaccharide‐producing culture on the physicochemical properties of low‐fat and reduced‐fat Kasar cheeses

A mixed starter culture containing exopolysaccharide (EPS)‐producing strains of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus was combined with Lactobacillus helveticus LH301 and used in the manufacture of low‐fat and reduced‐fat Kasar cheeses. For comparison, low‐fat (C10) and reduced‐fat (C20) cheeses were made using EPS‐producing (EPS⁺) starter strain and EPS‐non‐producing (EPS^?) starter strain. The physicochemical properties of the cheeses were assessed in terms of chemical composition, texture, microstructure and microbial content over 90 days. Cheeses made with EPS‐producing culture (EPS10 and EPS20) had lower protein contents than control cheeses with 10% and 20% fat in dry basis (C10 and C20). Scanning electron microscopy images showed that using EPS‐producing culture resulted in a less compact protein matrix and sponge‐like structure in the cheese samples. In general, cheeses made using EPS‐producing culture had lower total viable counts. This could be related to the reduced survivability of EPS‐producing cells in the cheese matrix during ripening due to autolysis ability.     

Use of Taiwanese ropy fermented milk (TRFM) and Lactococcus lactis subsp. cremoris isolated from TRFM in manufacturing of functional low-fat cheeses

Abstract: The purpose of this study was to manufacture new functional low‐fat cheeses using Taiwanese ropy fermented milk (TRFM) and Lactococcus lactis subsp. cremoris strains isolated from TRFM. After 28 d of ripening and storage, the viable populations of lactic acid bacteria (LAB) in the low‐fat cheeses made with L. lactis subsp. cremoris TL1 (TL1), L. lactis subsp. cremoris TL4 (TL4), and TRFM still maintained above 10⁸ CFU/g. The low‐fat cheeses made with TL1 and TRFM showed higher moisture contents than the cheeses made with TL4, full‐fat, and low‐fat cheese controls. The low‐fat cheeses made with TL1 and TL4 had higher customer preferential scores similar to full‐fat cheese control in the sensory evaluation. Additionally, the low‐fat cheeses fermented with TL1, TL4, and TRFM for 4 h had higher 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) free radical‐scavenging and ferrous ion‐chelating abilities than the cheeses fermented with the starters for 8 h, full‐fat, and low‐fat cheese controls. A better angiotensin‐converting enzyme (ACE) inhibition activity was also observed in the low‐fat cheeses made with TL1, TL4, and TRFM than that in the full‐fat and low‐fat cheese controls during ripening and storage period. Practical Application: As health‐conscious consumers continue to seek low‐fat alternatives in their diets, there remain strong interests for the dairy industry to develop low‐fat cheeses to meet the demands. This study clearly demonstrated that the low‐fat cheeses fermented with TL1 for 4 h showed a better overall acceptability and possessed antioxidative abilities and ACE inhibitory activities than other cheeses tested in this study. By improving its flavor and investigating the possible mechanisms of its functionalities in the future, this low‐fat cheese might possibly be commercialized and give a positive impact on cheese consumption in the future.     

Application of encapsulated enzymes to accelerate cheese ripening

The suitability of gellan, κ-carrageenan and a high-melting-fat-fraction of milk fat (HMFF) to encapsulate protease enzymes (Flavourzyme) and impact in accelerating Cheddar cheese ripening were studied. The rates of enzyme entrapment were 48.2%, 55.6%, and 38.9% for gellan, κ-carrageenan and HMFF, respectively. The enzyme capsules were incorporated into milk during cheese manufacture. The moisture content of cheeses with added gum capsules was higher than control cheeses. Casein (β) degradation was monitored by High-Performance Capillary Electrophoresis. All cheeses treated with encapsulated enzyme showed higher rates of proteolysis than the control cheese throughout the ripening period. The rate of proteolysis was greater with cheeses made incorporating κ-carrageenan capsules containing protease. Cheese texture and sensory quality were not significantly influenced by the type of encapsulating material (gum or milk fat). Differences in textural and sensory quality between treated and control cheeses were consistent with release of protease enzymes from capsules.     

The effect of varying casein/fat ratio on physicochemical and sensory qualities of Feta‐type cheese made using buffalo milk

The Feta‐type cheese was prepared with different casein/fat (C/F) ratios of buffalo milk using microbial rennet. The manufactured Feta cheeses were subjected to physicochemical and sensory quality at 15‐day interval up to 60 days of ripening. Sensory analysis discriminated the different level of C/F ratio of buffalo milk cheeses predominantly by age. There was no significant difference (P < 0.01) observed in cheese made from C/F ratio of 0.6–0.7 in terms of flavour. The titratable acidity (TA), soluble protein and free fatty acid appear to be age‐dependent and increased throughout the ripening in all experimental cheeses.     

Effect of Guar Gum on the Physicochemical, Thermal, Rheological and Textural Properties of Green Edam Cheese

In attempts to produce a low-fat cheese with a rheology and texture similar to that of a full-fat cheese, guar gum (within 0.0025–0.01%; w/v, final concentration) was added to low-fat milk. The obtained cheeses were characterised regarding their physicochemical, thermal, rheological and textural properties. Control cheeses were also produced with low and full-fat milk. The physicochemical properties of the guar gum modified cheeses were similar to those of the low-fat control. No significant differences were detected in the thermal properties (concerning the enthalpy and profile of water desorption) among all types of cheeses. The rheological behaviour of the 0.0025% modified cheese was very similar to the full-fat control. Overall, no trend was observed in the texture profile (hardness, cohesiveness, gumminess and elasticity) of the modified cheeses versus guar gum concentration, as well as in comparison with the control groups, suggesting that none of the studied polysaccharide concentrations simulated the textural functions of fat in Edam cheese.     

Influence of exopolysaccharide‐producing cultures on the volatile profile and sensory quality of low‐fat Tulum cheese during ripening

The objective of this investigation was to compare the composition and changes in the concentration of volatiles in low‐fat and full‐fat Tulum cheeses during ripening. Tulum cheese was manufactured from low‐ or full‐fat milk using exopolysaccharide (EPS)‐producing or non‐EPS‐producing starter cultures. A total of 82 volatile compounds were identified belonging to the following chemical groups: acids (seven), esters (21), ketones (14), aldehydes (six), alcohols (14) and miscellaneous compounds (20). The relative amounts of acids, alcohols and aldehydes increased in the cheeses made with EPS‐producing cultures during 90 days of ripening. Differences were found in the volatile profile of full‐fat Tulum cheese compared with the low‐fat variant, especially after 90 days of ripening. Exopolysaccharide‐producing cultures changed the volatile profile, and the EPS‐producing cultures including Streptococcus thermophilus + Lactobacillus delbrueckii subsp. bulgaricus + Lactobacillus helveticus (LF‐EPS2) produced cheese with higher levels of methyl ketones and aldehydes than the non‐EPS cultures. In the sensory analysis, full‐fat Tulum cheeses and the cheese produced with the EPS‐producing culture containing Lb. helveticus (LF‐EPS2) were preferred by the expert panel. It was concluded that the use of EPS‐producing starter cultures in the manufacture of low‐fat Tulum cheese had the potential to improve the flavour.     

The effect of adding whey protein particles as inert filler on thermophysical properties of fat‐reduced semihard cheese type Gouda

The effect of added microparticulated whey protein (Simplesse^®) on textural and thermophysical properties of fat‐reduced semihard cheese type Gouda was investigated. Full‐fat, reduced‐fat and low‐fat cheeses were manufactured of comparable moisture content, each made of control milk and milk systems containing 1% Simplesse^®, respectively. Whey protein particles improved textural properties of reduced‐fat and low‐fat cheese. Meltability and flowability were significantly enhanced by an increased fat level, Simplesse^® addition and ripening time. The results emphasise the role of microparticulated whey proteins acting as an inert filler within the composite cheese matrix and allow textural and thermophysical properties of fat‐reduced cheeses to be adjusted towards cheese with higher fat content.     

Rheology of Full-fat and Low-fat Cheddar Cheeses as Related to Type of Fat Mimetic

Cheeses with 60% reduced fat were prepared with three fat mimetics and viscoelasticity was studied. Storage and loss moduli of low-fat cheeses made with a carbohydrate-based fat mimetic were greater (p < 0.05) than those of low-fat cheeses made with two protein-based fat mimetics or low-fat control cheese, but smaller (p < 0.05) than the storage and loss moduli of full-fat cheese. A six-element Kelvin model properly predicted the creep compliance for the full-fat cheese and the low-fat cheeses made with or without fat mimetics. Low-fat cheese made with a carbohydrate-based fat mimetic had a network structure more similar to full-fat cheese than the low-fat control or samples made with protein-based fat mimetics.     

Use of changes in triacylglycerols during ripening of cheeses with high lipolysis levels for detection of milk fat authenticity

The triacylglycerol (TAG) compositions by carbon number during ripening of two Protected Designation of Origin (PDO) cheeses were analysed using short capillary column gas chromatography. Lipolysis levels were high in the Cabrales (blue cheese produced from cows’ milk or from blends of cows’ with goats’ milk) and Majorero goats’ milk cheeses at the end of ripening, with free fatty acid (FFA) levels of around 24 000 ppm and significant changes in the TAG composition. The level of lipolysis in an industrial blue cheese made from ewes’ milk was low, with an FFA value of around 6000 ppm and no significant changes in the TAG composition during ripening. The TAG values recorded for each cheese sample were substituted into the multiple regression equations that have been proposed for use in detecting foreign fats in milk fat. The values thus obtained were within the established ranges in early ripening. In the cheeses with high lipolysis levels during ripening, some of the values obtained fell outside the established ranges. These equations can be potentially useful for detecting foreign fats in these cheeses, when employed early in the ripening period. Furthermore, it is important to take into account that before coming to a conclusion about cheese authenticity, several individual samples should be analysed.     

Physicochemical properties of low‐fat soft cheese Turkish Beyaz made with bacterial cellulose as fat mimetic

The effects of incorporating various concentrations of bacterial cellulose (BC) (1.7 and 3.5% w/v) on the physicochemical and sensorial properties of low‐fat soft cheese Turkish Beyaz were investigated during a 60‐day ripening period. Control cheeses were produced using nonfat, half‐fat (1.7% fat) and full‐fat milk, for comparison. Depending on changing fat percentage, some physicochemical properties of cheeses, such as moisture, pH and salt showed significant differences, but BC had no influence on these properties. Fat content and BC altered the textural and sensory properties. These results indicated that BC improved the quality of reduced‐fat and low‐fat Turkish Beyaz cheeses.     

Use of cold microfiltration retentates produced with polymeric membranes for standardization of milks for manufacture of pizza cheese

Pizza cheese was manufactured with milk (12.1% total solids, 3.1% casein, 3.1% fat) standardized with microfiltered (MF) and diafiltered retentates. Polymeric, spiral-wound MF membranes were used to process cold (<7°C) skim milk, and diafiltration of MF retentates resulted in at least 36% removal of serum protein on a true protein basis. Cheese milks were obtained by blending the MF retentate (16.4% total solids, 11.0% casein, 0.4% fat) with whole milk (12.1% total solids, 2.4% casein, 3.4% fat). Control cheese was made with part-skim milk (10.9% total solids, 2.4% casein, 2.4% fat). Initial trials with MF standardized milk resulted in cheese with approximately 2 to 3% lower moisture (45%) than control cheese (∼47 to 48%). Cheese-making procedures (cutting conditions) were then altered to obtain a similar moisture content in all cheeses by using a lower setting temperature, increasing the curd size, and lowering the wash water temperature during manufacture of the MF cheeses. Two types of MF standardized cheeses were produced, one with preacidification of milk to pH 6.4 (pH6.4MF) and another made from milk preacidified to pH 6.3 (pH6.3MF). Cheese functionality was assessed by dynamic low-amplitude oscillatory rheology, University of Wisconsin MeltProfiler, and performance on pizza. Nitrogen recoveries were significantly higher in MF standardized cheeses. Fat recoveries were higher in the pH6.3MF cheese than the control or pH6.4MF cheese. Moisture-adjusted cheese yield was significantly higher in the 2 MF-fortified cheeses compared with the control cheese. Maximum loss tangent (LT_max) values were not significantly different among the 3 cheeses, suggesting that these cheeses had similar meltability. The LT_max values increased during ripening. The temperature at which the LT_max was observed was highest in control cheese and was lower in the pH6.3MF cheese than in the pH6.4MF cheese. The temperature of the LT_max decreased with age for all 3 cheeses. Values of 12% trichloroacetic acid soluble nitrogen levels were similar in all cheeses. Performance on pizza was similar for all cheeses. The use of MF retentates derived with polymeric membranes was successful in increasing cheese yield, and cheese quality was similar in the control and MF standardized cheeses.     

The effects of some starter cultures on the properties of Turkish White cheese

White cheese samples were manufactured from bovine milk using three different commercial direct vat starter cultures (DVS-1, -2 and -3) and a lyophilized culture, and ripened at 4 ± 1°C for 90 days. The composition, titratable acidity and ripening indices of the cheese samples were determined on the 2nd, 30th, 60th and 90th days of ripening. The ratios of total solids, protein and fat were higher for cheeses manufactured using DVS-2 and lyophilized cultures but the titratable acidity in cheese produced using DVS-3 and lyophilized cultures was higher (P < 0.01). The mean value of the ripening indices of the cheese produced using the lyophilized culture was lower than the cheeses produced with added DVS cultures (P < 0.05). The total solids, ash, salt ratios, titratable acidity and ripening indices values increased for all types of white cheeses during ripening (P < 0.05).     

Influence of carboxymethylcellulose on the physicochemical,rheological and sensory attributes of a low‐fat Domiati cheese

The physicochemical, rheological and sensory attributes of a low‐fat Domiati cheese produced using carboxymethylcellulose (CMC), a hydrocolloid, at 0.4, 0.6, 0.8 and 1% (w?w) were examined during the ripening period. Results indicated that, as the carboxymethylcellulose content of cheese milk increased, cheese yield and moisture of low‐fat Domiati cheese significantly increased but the protein, salt and fat values significantly decreased. Rheological parameters were significantly lower in cheeses made with CMC. With regard to the sensory properties of the cheeses, low‐fat Domiati cheese made with 1% (w?w) CMC recorded the highest scores for sensory attributes.     

Utilization of interesterified fat in the production of Turkish white cheese

The chemical, physicochemical, proteolysis, sensory, and texture characteristics of white cheeses made from interesterified fat were examined throughout ripening for 90 days. The water-soluble nitrogen based ripening indexes of cheeses increased throughout the ripening period. However, there were not large quantitative differences between the peptide profiles of the all cheese samples. Cheeses produced by using fully interesterified fat had higher values for hardness, chewiness, and gumminess than that of control cheese (p<0.05). The polyunsaturated to saturated fatty acid ratios of cheeses were increased due to the presence of interesterified fat. The cholesterol values of cheeses decreased at the rate of between 58.83–89.04% depending on interesterified fat addition. In the sensory analysis, similar scores were obtained for both the control cheese and the other cheeses. The results showed that interesterified fat in cheese production could be used to fully or partially replace the milk fat in cheese.     

Cheese ripening in nonconventional conditions: A multiparameter study applied to Protected Geographical Indication Canestrato di Moliterno cheese

A multiparameter study was performed to evaluate the effect of fondaco, a traditional ripening cellar without any artificial temperature and relative humidity control, on the chemical, microbiological, and sensory characteristics of Protected Geographical Indication Canestrato di Moliterno cheese. Ripening in such a nonconventional environment was associated with lower counts of lactococci, lactobacilli, and total viable bacteria, and higher presence of enterococci, in comparison with ripening in a controlled maturation room. Moreover, fondaco cheese underwent accelerated maturation, as demonstrated by faster casein degradation, greater accumulation of free AA, and higher formation of volatile organic compounds. Secondary proteolysis, as assessed by liquid chromatography-mass spectrometry of free AA and low molecular weight peptides, did not show any qualitative difference among cheeses, but fondaco samples evidenced an advanced level of peptidolysis. On the other hand, significant qualitative differences were observed in the free fatty acid profiles and in the sensory characteristics. Principal component analysis showed a clear separation of the fondaco and control cheeses, indicating that ripening in the natural room conferred unique sensory features to the product.     

Effect of lactose standardization of milk using low-concentration factor ultrafiltration: Effect of reducing the lactose-to-casein ratio on the properties of milled-curd Cheddar cheese

The pH of cheese is determined by the amount of lactose fermented and the buffering capacity of the cheese. The buffering capacity of cheese is largely determined by the protein contents of milk and cheese and the amount of insoluble calcium phosphate in the curd, which is related to the rate of acidification. The objective of this study was to standardize both the lactose and casein contents of milk to better control final pH and prevent the development of excessive acidity in Cheddar cheese. This approach involved the use of low-concentration factor ultrafiltration of milk to increase the casein content (～5%), followed by the addition of water, ultrafiltration permeate, or both to the retentate to adjust the lactose content. We evaluated milks with 4 different lactose-to-casein ratios (L:CN): 1.8 (control milk), 1.4, 1.1, and 0.9. All cheesemilks had similar total casein (2.3%) and fat (3.4%) contents. These milks were used to make milled-curd Cheddar cheese, and we evaluated cheese composition, texture, functionality, and sensory properties over 9 mo of ripening. Cheeses made from milks with varying levels of L:CN had similar moisture, protein, fat, and salt contents, due to slight modifications during manufacture (i.e., cutting the gel at a smaller size than control) as well as control of acid development at critical steps (i.e., cutting the gel, whey drainage, salting). As expected, decreasing the L:CN led to cheeses with lower lactic acid, residual lactose, and insoluble Ca contents, as well as a substantial pH increase during cheese ripening in cheeses. The L:CN ratio had no significant effect on the levels of primary and secondary proteolysis. Texture profile analysis showed no significant differences in hardness values during ripening. Maximum loss tangent, an index of cheese meltability, was lower until 45 d for the L:CN 1.4 and 0.9 treatments, but after 45 d, all reduced L:CN cheeses had higher maximum loss tangent values than the control cheese (L:CN 1.8). Sensory analyses showed that cheeses made from milks with reduced L:CN contents had lower acidity, sourness, sulfury notes, and chewdown cohesiveness. Standardization of milk to a specific L:CN ratio, while maintaining a constant casein level in the milk, would allow Cheddar cheese manufacturers to have tighter control of pH and acidity.     

Ultrafiltered milk reduces bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide-producing culture

The objectives were to reduce bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide (EPS)-producing culture and study relationships among ultra-filtration (UF), residual chymosin activity (RCA), and cheese bitterness. In previous studies, EPS-producing cultures improved the textural, melting, and viscoelastic properties of reduced-fat Cheddar cheese. However, the EPS-positive cheese developed bitterness after 2 to 3 mo of ripening due to increased RCA. We hypothesized that the reduced amount of chymosin needed to coagulate UF milk might result in reduced RCA and bitterness in cheese. Reduced-fat Cheddar cheeses were manufactured with EPS-producing and nonproducing cultures using skim milk or UF milk (1.2×) adjusted to a casein:fat ratio of 1.35. The EPS-producing culture increased moisture and RCA in reduced-fat Cheddar cheese. Lower RCA was found in cheese made from UF milk compared with that in cheese made from control milk. Ultrafiltration at a low concentration rate (1.2×) produced EPS-positive, reduced-fat cheese with similar RCA to that in the EPS-negative cheese. Slower proteolysis was observed in UF cheeses compared with non-UF cheeses. Panelists reported that UF EPS-positive cheese was less bitter than EPS-positive cheese made from control milk. This study showed that UF at a low concentration factor (1.2×) could successfully reduce bitterness in cheese containing a high moisture level. Because this technology reduced the RCA level (per g of protein) to a level similar to that in the control cheeses, the contribution of chymosin to cheese proteolysis would be similar in both cheeses.