首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
两种纤维素纤维的原纤化及抄造特性   总被引:1,自引:0,他引:1  
主要对天丝纤维和丽赛纤维的原纤化形态随打浆强度的变化进行了研究:同时表征了不同打浆强度下,天丝纤维和丽赛纤维的抄造性能。结果表明,通过控制打浆强度,天丝纤维和丽赛纤维的长度、直径、扭曲程度和原纤化程度都会发生变化;在打浆强度增强的过程中,天丝纤维和丽赛纤维均首先被迅速地切断,然后才开始出现明显的原纤化现象;相对于纤维长度而言,天丝纤维和丽赛纤维的打浆度均对纤维原纤化的程度更敏感;相对于丽赛纤维,天丝纤维具有高度的原纤化特性和大幅的形态可控性。本研究加深了对天丝纤维和丽赛纤维的认识,为纤维素纤维在高精度过滤等特种纸领域的应用提供了一定的借鉴。  相似文献   

2.
丽赛纤维/精梳棉纺纱工艺探讨   总被引:2,自引:1,他引:1  
文章综述了丽赛(Richcel)纤维的结构和性能特点,主要对丽赛纤维纺纱工艺流程进行了研究,并对成纱质量进行了测试。  相似文献   

3.
论述了丽赛纤维的生产工艺特点,丽赛纤维采用清洁环保的生产技术加工而成。分析了丽赛纤维的结构和形态,并且与其他几种常见纤维的性能进行比较。探讨了丽赛纤维优良的性能特点,及其所具有的绿色环保性。研究了其在针织、机织、特殊产品、差别化纤维和特殊风格整理方面的开发应用趋势。  相似文献   

4.
介绍了丽赛纤维,并将其与莫代尔、天丝、棉等纤维进行了性能比较,且以羊毛与丽赛纤维混纺针织物(50∶50)为例,阐述了其染整加工。结果表明,使用高效精练酶T以及退煮酶L1或L2对羊毛与丽赛纤维混纺针织物进行练漂,可较好地去除杂质又不损伤纤维;选择使用Cibacron FN三原色染料进行染色,60℃染色时,活性染料Cibacron FN型对羊毛与丽赛纤维混纺针织物的染色同色性好;羊毛与丽赛纤维混纺针织物对盐的用量和浴比略为敏感一些,碱对活性染料上染丽赛纤维的影响比对羊毛的影响大,染色后必须充分皂煮以去除丽赛纤维上的浮色;后整理中应注意各工序参数设定以使羊毛与丽赛纤维混纺针织物的风格特点充分体现。  相似文献   

5.
丽赛纤维及其纱线产品研究   总被引:2,自引:1,他引:1  
文章介绍了丽赛纤维的物理、机械性能,丽赛纤维纯纺纱的生产工艺以及丽赛纤维纱线练漂、染色工艺。  相似文献   

6.
综述了丽赛(Richcel)纤维的结构和性能特点,介绍了近年来丽赛纤维在服装面料及家纺产品上的应用,进一步阐述了丽赛纤维及织物未来的发展趋势。  相似文献   

7.
论述了丽赛纤维作为Polynosic高湿模量纤维素纤维的优秀性能、丽赛纤维独特的结构和丽赛纤维织物性能的特点,并就丽赛纤维在针织工业中的应用现状及发展趋势作了简要的阐述。  相似文献   

8.
丽赛纤维的结构性能及其产品应用   总被引:3,自引:0,他引:3  
房莉  顾平 《国外丝绸》2009,24(2):24-25
阐述了一种新型高模量再生纤维素纤维——丽赛(Richcel)的结构特征(包括纤维的纵、横向截面结构、内部结构、原纤化等)及其性能特点,并对丽赛纤维产品应用进行了分析和讨论。  相似文献   

9.
新丽赛纤维(Richcel)不仅有良好的吸湿透气性和穿着舒适性,而且克服了传统再生纤维素纤维生产工艺流程长、能耗大的缺点,原料来源广泛,生产环保,因而得到广泛应厨。本文介绍了丽赛纤维的性能、发展概况,并对其发展前景做了展望,提出了丽赛纤维需要解决的问题。  相似文献   

10.
丽赛纤维是一种新型纤维素纤维,它不仅集天然纤维和合成纤维的优点于一身,而且还具有独特的环保性能,利用丽赛纤维与竹纤维、Modal纤维及棉纤维加工的织物性能优良,经染整加工后产品性能优良。本文根据丽赛纤维混纺府绸织物的特点:介绍了该产品染整工艺,通过生产实践和工艺分析.为提高丽赛纤维混纺纱府绸织物染整工艺质量提供参考依据。  相似文献   

11.
Dehghan Mahdiyeh 《纺织学会志》2013,104(11):1167-1177
In the ring spinning process, the spinning triangle plays an important role in the quality and efficiency of yarn spinning. The distribution of fiber tension at the spinning triangle is important. In this study, models such as energy methods, energy methods using false twist, and finite element method are applied. The model parameters on the distribution of fiber tension in the symmetric and asymmetric spinning triangle with a uniform distribution of single fiber, uniform distribution of fiber types, and distribution buckling fibers in the spinning triangle are analyzed. The results show that there is an increase in the distribution of fiber tension in symmetric spinning triangle. Fibers, depending on their position in the spinning triangle, have different tensions. In single fibers in the twist point, the tension of the fiber bundle is maximum, the fiber tension is less, and the compression force of the fiber bundle is greater. The spinning triangle shape is effective on the distribution of fiber tension.  相似文献   

12.
紧密纺纱技术在麻纺细纱机上的应用   总被引:2,自引:1,他引:1  
传统麻纺细纱机纺纱过程中因纺纱三角区的存在,苎麻纱毛羽多且长,影响织物质量.分析了传统麻纺细纱机的纺纱特点以及利用紧密纺技术进行改造的方法,对紧密纺纺纱原理进行了论述,介绍了麻纺细纱机紧密纺装置的构成.纺纱结果表明,紧密纺苎麻纱与传统环锭纺苎麻纱相比在毛羽、强力、条干及生产效率等方面均有较大改善,综合效益较好.  相似文献   

13.
In the ring spinning process of staple yarn, spinning triangle is a critical zone, whose geometry influences the mechanical properties of fiber in the spinning triangle directly. In the practical spinning, especially in some modified ring spinning systems, the spinning triangle is often asymmetric, in which the horizontal deviation of the twisting point is existed and lead to an obvious angle between the yarn spinning tension and the vertical axis perpendicular to the nip line. Therefore, in this paper, the fiber tension distributions in this kind of asymmetric spinning triangle were studied using the finite element method. In the direct finite element model, the initial strain of fibers in the two sides of spinning triangle is asymmetric, and corresponding accidental fiber tensions would be produced, which makes the fiber move to the middle of the spinning triangle and lead to inaccurate results. Therefore, in the paper, one new finite element model of the asymmetric spinning triangle with left (right) horizontal deviation was presented for calculating the fiber tension. In the model, an asymmetric spinning triangle with the same right (left) horizontal deviation was used to combine with the original asymmetric spinning triangle, and one axisymmetric quadrangle was built, and the symmetry axis is the central fiber. Then, the fiber tension and torque distributions in the spinning triangles of Ne40 (14.6 tex) and Ne60 (9.7 tex) cotton spun yarn were numerical simulated with different horizontal deviations and twist factors. Furthermore, the accuracy of the proposed finite element model in calculating the fiber tensions was validated by comparing it with the theoretical model built by the energy approach.  相似文献   

14.
紧密纺涤棉混纺纱纤维径向分布测试分析   总被引:4,自引:2,他引:2  
引用汉密尔顿转移指数方法分析了紧密纺涤棉混纺纱纤维的径向分布,并与传统环锭纺涤棉混纺纱进行了比较.结果表明,紧密纺涤棉混纺纱中纤维的转移趋势不如传统环锭纱明显,纤维的径向分布也比环锭纺纱更随机.  相似文献   

15.
再生竹纤维是一种新型环保纤维,文章介绍了再生竹纤维的性能特点,并通过试纺14.5tex纯竹纱、18.1tex纯竹纱和20.8tex竹棉混纺纱3种纱线,分析了再生竹纤维的纺纱工艺流程和工艺参数,同时讨论了提高成纱质量的一些技术措施。  相似文献   

16.
高占勇 《纺织器材》2012,39(6):22-25
为了解决目前常用粘胶短丝喷丝组件反应时间延长、纺丝速度减慢和纺丝产量降低的问题,分析了粘胶短丝喷丝组件的结构及存在问题,设计出一种新型粘胶短丝喷丝组件.该组件喷丝板上用于安装喷丝帽的孔采用了圆环形排布,克服了原结构中梅花排布形式的缺点,组件中间可以输送凝固浴液,保证了凝固浴液与原液的充分接触,缩短了反应时间,提高了纺丝速度和产量.指出:该新型粘胶短丝喷丝组件对于一些特种纤维湿法纺丝机喷丝组件的设计具有非常重要的参考价值,今后,国产粘胶短丝机应在精度、稳定性和可靠性方面下功夫.  相似文献   

17.
介绍了多元化纤维纺纱的工艺流程及天然纤维、再生纤维、合成纤维等纺纱原料在多元化纤维纺纱中的应用.围绕纺纱原料,以纺纱设备、纺纱工艺2个方面为重点做了详细阐述;在纺纱设备的阐述中,又以和毛设备、梳理设备的改造与应用为重点做了详细论述.在和毛工艺的阐述中,对纤维的开松、混合、给助剂及相关助剂的选择做了详细的论述;在纺纱工艺的阐述中,重点以梳理工艺、并条工艺做了详细论述,并阐述了制订工艺参数的依据.在生产管理模式及产品开发方面,简要介绍了在实际工作中的体会.  相似文献   

18.
竹纤维涡流纺纱流程中梳棉工艺分析   总被引:6,自引:3,他引:3  
张瑜 《棉纺织技术》2005,33(1):17-20
涡流纺纺制竹纤维纱生产中,梳棉生条质量对涡流纱结构和性能影响明显.针对竹纤维性能及涡流纺纱工艺要求,对梳棉针布配置、刺辊速度、刺辊与给棉板隔距、锡林与道夫速比及相对湿度等工艺进行了探析.通过提高生条中纤维整齐度,减少弯钩和棉结,可以提高竹纤维涡流纺纱的质量.  相似文献   

19.
Formotex纤维的纺纱实践   总被引:1,自引:1,他引:0  
介绍了Formotex纤维的性能特征、纺纱工艺流程及技术措施.Formotex纤维是一种木浆纤维,该纤维具有较高的强力,有良好的可纺性,可纯纺,也可与其他纤维混纺.  相似文献   

20.
国内外紧密纺纱技术的最新进展   总被引:13,自引:6,他引:7  
介绍了第九届中国国际纺织机械展览会上展出的各种紧密纺纱机,从集聚原理看紧密纺有气动式集聚和机械式集聚两种,紧密纺可用于棉纺、毛纺、麻纺及纺化纤,并且可与赛络纺、包芯纺结合.对各纺机公司集聚装置的结构特点进行了对比分析,指出了发展紧密纺纱技术应注意的一些问题.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号