共查询到20条相似文献,搜索用时 781 毫秒
1.
2.
对比进口润滑液产品,研究一种性能优良的子午线轮胎帘线钢丝用润滑液,优化其配方组成,测试其主要理化性能。润滑液的主要化学成分为油酸、三乙醇胺、甘油和苯并三氮唑等。采用四球机对润滑液的摩擦磨损性能进行试验,结果表明:在25℃和载荷为392 N的30 min磨损试验中,用质量分数为10%的实验室制润滑液和质量分数为10%的进口润滑液进行对比,实验室制润滑液最大无卡咬负荷为921.3 N,磨斑直径为0.39 mm,摩擦因数为0.049 5,该结果优于进口润滑液。乳液稳定性和腐蚀性试验结果表明,实验室制润滑液稳定,抗腐蚀和消泡性能好。 相似文献
3.
利用钢筋弯曲机进行钢管弯曲时,弯曲处截面变形大,回弹角增大,影响美观,而且弯曲机本身震动大,齿轮磨损严重。因此,对钢筋弯曲机进行改进,并设计出一种理想的自动弯管机。 相似文献
4.
王玲 《中国眼镜科技杂志》2001,(1):52-53
本文概述了博士伦润明新概念长效润滑液的特点,独特的配方和功效,并与润明家族中的另一产品--润明镜片润滑液或其它竞争产品进行了比较。结果表明,博士伦润明新概念长效润滑液是适用人群广泛、有效解决干眼现象并令镜片配戴持久舒适的符合美国药典的新一代润滑液。 相似文献
5.
某型攻角侧滑角传感器设计 总被引:1,自引:0,他引:1
攻角和侧滑角反映飞机轴线与气流方向的夹角,是飞机飞行过程中的重要参数。文章提出了某型攻角侧滑角传感器设计方案,实现了对攻角和侧滑角的精确测量。 相似文献
6.
目前,震动式干燥机在制糖工业中普遍应用,并存在一定程度的优缺点。广东南海糖厂根据该种机在生产中存在的问题及生产发展的需要,对其进行改进。主要介绍了对该种机进行改进的设计、实践和效果。 相似文献
7.
8.
通过定性、定量分析,指出原FA046A型振动棉箱给棉机角钉帘传动的不合理处。通过理论分析、设计计算,给出了合理的改进方案和改进方法,将原来的带轮传动改为链轮传动。更新改进后不仅降低了生产成本,而且带来可观的经济的效益。 相似文献
9.
王玲 《中国眼镜科技杂志》2001,(1)
本文概述了博士伦润明新概念长效润滑液的特点,独特的配方和功效,并与润明家族中的另一产品——润明镜片润滑液或其它竞争产品进行了比较。结果表明,博士伦润明新概念长效润滑液是适用人群广泛、有效解决干眼现象并令镜片配戴持久舒适的符合美国药典的新一代润滑液。 相似文献
10.
11.
自动缫丝机绪下粒数通过生丝纤度控制系统来自动控制,当生丝纤度控制系统受到工艺、设备、环境等因素的影响时,绪下粒数会发生异常变化,为此,需要要对绪下粒数进行管理。绪下粒数管理应从绪下粒数调查与调整、工艺管理和缫丝挡车工绪下粒数管理几方面入手,以使生丝纤度控制系统尽可能处于理想的工作状态。 相似文献
12.
Sewing thread is one of the most important components of a sewn product that contributes significantly in the useful life of a product. Stitch class 504 is the one which is used in all types of sewn products. Its thread consumption is higher than class 300 and class 400. A mathematical model to predict the sewing thread consumption of stitch class 504 has been proposed in this paper. The model is based on the geometry of the stitch. The proposed model takes into account material thickness and stitch density. The model was validated by using 24 samples (with different material thickness and stitch densities). The accuracy of the model was found to be 99%. Sensitivity analysis revealed that stitch density has 62% effect and material thickness has 38% effect on thread consumption. The proposed model can predict the thread consumption accurately; therefore, it can be used for better estimation of required thread and encourage its better utilization in sewn product industry. 相似文献
13.
14.
15.
文章通过对经二重织物添加边字的试织,结合设备及边字丝线特点,在多次试验的基础上,确定了较为合理的工艺参数,并简要介绍了生产注意事项。 相似文献
16.
17.
根据文献记载和图片信息综述了闪色面料的起源、发展和现状详细论述了各种闪色面料——闪缎、全银线织物、珠片、涂层材料等的肌理、效果和色彩以及它们在服装设计中的运用。 相似文献
18.
对制丝工艺过程中煮茧工艺、缫丝工艺及丝条通道零部件质量、复摇工艺与生丝抱合力的关系作了试验调查,并提出了在制丝工艺过程中提高生丝抱合力的措施。 相似文献
19.
Sewing thread is one of the most basic yet important components of a garment. Thread consumption for the lockstitch (Class 301) can be calculated by using its geometrical shape. This paper aims to develop a geometrical model to calculate the thread consumption for lockstitch (Class 301). Based on the basic geometry of lockstitch, a model has been proposed. The model is derived mathematically taking into account different variables: stitch length, stitch density, material thickness, and interlacing. Finally, the model was verified for 19 samples by comparing actual thread consumption with predicted thread consumption. The proposed model predicts the thread consumption with 97% accuracy. Sensitivity analysis is also performed to determine the significant influencing factor affecting the thread consumption. The proposed model can predict the thread consumption precisely for 301 lockstitch. Therefore, this model is useful for the apparel industry. 相似文献
20.
建立高效液相色谱紫外检测的分析方法,同时测定涤纶缝纫线中分散黄1、分散黄3、分散黄9、分散黄49、分散红1、分散红11、分散红17这7种致敏性分散染料。样品经甲醇超声提取后,采用C18色谱柱,以乙腈(内含0.1%甲酸)和0.02 mol/L乙酸铵(内含0.1%甲酸)为流动相,梯度洗脱分离,在360、440、480 nm波长下进行检测。7种分散染料的加标回收率在90.0%~101.0%之间,其相对标准偏差在1.0%~5.4%之间,待测化合物在1.0~50.0 mg/L之间均具有良好的线性,回归系数均大于0.999,检出限(LOD)在0.2~1.0 mg/kg之间。本方法简便、灵敏、重现性好,能满足涤纶缝纫线中分散染料的监测要求。 相似文献