Influence of microwave,the combined microwave/hot air and only hot air roasting on the formation of heat-induced contaminants of carob powders

ABSTRACT

This study aims to investigate the effects of microwave, combined microwave/hot air treatment and hot air-only roasting on the formation of heat-induced contaminants of carob powders. Moisture content, water activity and pH values of the product decreased with the increasing roasting time and microwave power, while browning index (BI) and ultraviolet absorbance (UV-A) values were increased. While L and b values of carob powders decreased with increasing the roasting time and microwave power, a and ΔE values were increased. Varying roasting conditions also significantly affected the content of Maillard reaction products (MRPs): 5-hydroxymethylfurfural (HMF) (0.69–28.32 mg/kg dry matter), furfural (<LOD-10.44 mg/kg dm), furan (6.65–10.26 mg/kg dm) and acrylamide (78.69–122.87 µg/kg dm). MRPs contents increased with increasing the roasting time and microwave power. The highest MRPs were found in the samples roasted at 140°C for 20 min by hot air. Significant correlations between the amount of MRPs and colour values were found, especially with a and b values.     

Optimization of the pistachio nut roasting process using response surface methodology and gene expression programming

Roasted pistachio nuts are consumed as snack foods and used as ingredients in confectionery, chocolates and ice-cream industries. Response surface methodology (RSM) and Gene Expression Programming (GEP) were used to optimize the roasting process for production of the pistachios in shell, kernel, and ground-kernel forms over a range of temperature (100-180 °C) and for various times (10-60 min). The moisture content and color parameters (L, a, b and yellowness index (YI)) were evaluated during roasting and modeled by RSM and GEP. The moisture content changes of the pistachios during roasting were successfully described by RSM and GEP models. The results showed that the L, a and b values could be used as parameters for the development of the predictive models during roasting of in shell pistachios, but the color of kernel and ground-kernel pistachios could be monitored by measuring only a and a, b values, respectively. The quadratic models developed by RSM adequately described the changes in selected color parameters during roasting. The GEP models were found to be slightly better than RSM models. The response surface of desirability function was used successfully in optimization procedure of pistachio nut roasting.     

The use of bulgur as a meat replacement: bulgur‐sucuk (a vegetarian dry‐fermented sausage)

In this study, bulgur was used to produce a new sucuk (Turkish dry‐fermented sausage) as a vegetarian product. Yellow and black/brown bulgurs were mixed into the sucuk dough as fat and meat imitations respectively. Instead of animal fat, olive oil was used for lubrication. Nitrite and nitrate were not added to the recipe. The bulgur‐sucuk was ripened at 60–95% relative humidity and 18–25 °C over 15 days. During ripening, pH, moisture content and textural (hardness, adhesiveness, springiness, cohesiveness, gumminess, chewiness and resilience), sensory (flavour, colour, cutting and overall scores) and colour (Hunter L, a, b, yellowing index (YI), total colour difference, hue angle, chroma and browning index values) attributes were monitored. The pH and moisture content of the bulgur‐sucuk were 5.81 and 493 g kg^?1 respectively before ripening and decreased to 4.14 and 280 g kg^?1 during ripening. The colour values L, a, b and YI decreased significantly (P < 0.05) to 33.03, 7.67, 11.63 and 80.70 respectively during ripening. Some of these decreases in colour values were expected owing to the lack of nitrite and nitrate. All instrumentally measured textural properties of the bulgur‐sucuk increased significantly (P < 0.05) during ripening. From the results of the parameter measurements and sensory evaluations, bulgur appears to be suitable as a meat replacement when used in a dry‐fermented formulation. Copyright © 2006 Society of Chemical Industry     

Kinetics of colour change of bamboo shoot slices during microwave drying

The effect of microwave power on colour change kinetics of bamboo shoot slices was investigated during microwave drying. Colour changes were quantified by tri‐stimulus Hunter L (whiteness/darkness), a (redness/greenness), and b (yellowness/blueness) system. These values were also used for calculation of total colour change (ΔE), chroma, hue angle, and browning index (BI). Microwave drying as expected changed colour parameters because of browning. The values of L and b decreased, while values of a and ΔE increased during drying. Mathematical modelling of colour change kinetics indicated that L, b, chroma and BI could be defined using a first‐order kinetic model, while a, ΔE and hue angle could be defined using a zero‐order kinetic model. Considering together colour deterioration and quality of dried bamboo shoot slices at higher power reveals the need of process standardisation for getting good quality product.     

Response surface methodology study on the effects of salt,microbial transglutaminase and heating temperature on pork batter gel properties

Response surface methodology was used to investigate the main effects and interactions of sodium chloride (0–2%), microbial transglutaminase preparate (MTG, 0–0.6%) and heating temperature (HT, 70–100°C) on water binding, textural and colour characteristics of pork batter gels cooked to an internal temperature of 70 °C. Lower salt gels showed decreases in hardness, chewiness and elastic properties, as well as significant reduction in the cooking yield and increase of expressible moisture. Salt levels also affected gel colour parameters, with Hunterlab a* and b* values being inversely correlated with salt concentration. MTG addition favourably reduced the cooking loss and increased hardness and chewiness of gels, but was not able to improve these parameters in low-salt products to the same levels as the high-salt products. Heating temperature was found to have relatively minor effect, primarily through its interaction with salt level and in a quadratic term affecting the elasticity and springiness of the gels.     

Effects of different kind of sesame materials on the physical properties of gomatofu (sesame tofu)

Gomatofu (sesame tofu) is one of the traditional Japanese healthy foods and is representative of all shojin (vegetarian) dishes. Gomatofu, one of the mixed gels consisting of kudzu (arrowroot) starch and sesame, possesses an extremely unusual textural characteristic which is soft, smooth, and springy. The textural properties are greatly influenced by preparation, ingredients and roasting conditions of sesame seeds. Hence there are many kinds of sesame materials which can be used to prepare gomatofu such as white, black, huskless or not and roasted or unroasted sesame materials, in this study, the effects of these materials on the physical properties of gomatofu were studied. The sample of Ra-W prepared with unroasted huskless sesame seed had the least hardness, but mouthfeel of this sample were the highest. The samples of Ro-B and Ro-W prepared with roasted husk (black and white) sesame seed were evaluated to have the best palatability because of their superior springiness. It was clarified that different kinds of sesame materials affected the forming of structure and physical properties of gomatofu, because the chemical components were different from varieties of sesame materials.     

Antioxidant activities of defatted sesame meal extracts in cooked turkey breast and thigh meats

The antioxidant properties of methanolic extract of raw and roasted (at 200 °C for 60 min) defatted sesame‐meal in turkey breast and thigh meat systems were determined. The TBARS values of turkey breast and thigh meat added with 0.1% of roasted defatted sesame‐meal extract were 18.8% and 24.7%, respectively, lower than those of untreated controls after 5 days of storage. The turkey meats added with roasted defatted sesame‐meal extract had higher a* and b* values than those of controls due to the browning effects occurred in sesame seeds during roasting. The amounts of volatile hydrocarbons (pentane, hexane, heptane, and octane) and carbonyls (propanal, butanal, pentanal, hexanal and heptanal) significantly decreased by the addition of roasted defatted sesame‐meal extract. In particular, the amount of hexanal, the most predominant volatile compound in the cooked turkey meat, decreased by 74% and 83% in turkey breast and thigh meat, respectively. However, raw defatted sesame‐meal extract did not show significant antioxidant activity in turkey meats. These results indicated that heat treatment of sesame‐meal increased the antioxidant activities of methanolic extract of defatted sesame meal. Copyright © 2007 Society of Chemical Industry     

Effects of seed roasting temperature and time on the quality characteristics of sesame (Sesamum indicum) oil

The quality characteristics and composition of sesame oils prepared at different roasting temperatures (160–250°C) from sesame seeds using a domestic electric oven were evaluated as compared to an unroasted oil sample: only minor increases (P<0·05) in characteristics, such as peroxide value, carbonyl value, anisidine value and thiobarbituric acid reactive substances, of sesame oils occurred in relation to increasing roasting temperature and time between 160 and 200°C, but colour units of oils increased markedly over a 220°C roasting temperature. Significant decreases (P<0·05) were observed in the amounts of triacylglycerols and phospholipids in the oils prepared using a 250°C roasting temperature. The amounts of γ-tocopherol and sesamin still remained over 80 and 90%, respectively, of the original levels after roasting at 250°C. In the oil prepared using a 250°C roasting temperature, sesamol was detected at 3370 mg per kg oil, but sesamolin was almost depleted after 25 min of roasting. Burning and bitter tastes were found in the oils prepared at roasting temperatures over 220°C. The results suggested that a high-quality product would be obtained by roasting for 25 min at 160 or 180°C, 15 min at 200°C and 5 min at 220°C when compared with the other samples. © 1997 SCI.     

Influence of quinoa roasting on sensory and physicochemical properties of allergen‐free,gluten‐free cakes

The objectives of this study were to determine pasting properties of non‐roasted (NR) and roasted quinoa (RQ) and to investigate the effect of RQ on consumer acceptance and physicochemical properties of an allergen‐free, gluten‐free cake formulation. Quinoa seeds were roasted at 177 °C for 15 (R15), 30 (R30) and 45 min (R45), and flours were analysed for pasting properties. Five cakes including a commercial chocolate cake (CCC) and cakes made with NR and RQ flours were evaluated for preference by fifty panelists. Quality parameters included colour, water activity, moisture content, firmness, weight and height. Peak and final viscosity increased with roasting time. The NR cake had the highest sensory scores for appearance, colour and texture. On flavour and overall acceptability, CCC was the highest. Regarding quality data, CCC, NR and R15 cakes had similar L* values, while CCC had the lowest a*, b*, a_w, moisture content and firmness values.     

Impact of roasting conditions on the quality and acceptance of the peanut paste

Roasting is the main processing step performed to improve sensory and conservative properties of peanuts. The objective of this study was to evaluate changes in peanut oil and paste during roasting at different temperatures in a conventional oven (80, 110, 140, 170, and 200°C) and microwave. The increase in roasting temperature promoted reduction of L* value, b* value, and increases of a*, K₂₃₂, K_270, and acidity. For alpha (α), gamma (γ), and delta (δ) tocopherols, as well as fatty acids, less degradation were observed at the roasting temperature of 140°C. Paste acceptability greater than 70% was achieved with roasting at 140°C. Based on the results, 140°C was the optimal roasting temperature that achieved the best paste acceptance rates with the smallest changes in oil and tocopherol quality parameters.     

Colour differences in paprika pepper varieties (Capsicum annuumL) cultivated in a greenhouse and in the open air

The quality of six paprika pepper varieties, cultivated in a greenhouse and in the open air, has been studied. There were differences in their paprika colours with regard to the total content of pigments (ASTA unities) and the quotient of the absorbance spectra values for red and yellow pigments (tint). Using colorimetric measurements, directly carried out on the surface of the ripe fruits, the varieties are clearly separated in the CIELAB space colour, depending on their growing conditions. The colorimetric coordinates a* and b* and quotient a*/b* of the ripe fruits, cultivated in greenhouse, allow to predict the total pigments concentration of the resulting paprika. For the cultivations in the open air, the fruit brightness (L*) and the chromatic quotient 2000×a*/L*×b* are the parameters which show best the correlation with the total content of the paprika pigments. The fruit colour change, from green to red, coincides in both growing conditions with the moment when the chlorophyll b concentration surpasses the a one. © 1998 SCI.     

Degradation Kinetics of Colour and Total Carotenoids in Jackfruit (Artocarpus heterophyllus) Bulb Slices During Hot Air Drying

The kinetics of colour and carotenoids degradation in jackfruit bulb slices was evaluated during hot air drying at 50, 60 and 70 °C. Visual colour as well as total carotenoids (TC) content was found to be influenced by the drying process. Tri-stimulus colour parameters such as Hunter L and b values decreased and a value increased during drying. The combination of Hunter L × b value was found to represent the colour change adequately. Degradation of TC and visual colour in terms of Hunter L × b value followed first-order reaction kinetics; however, zero-order reaction kinetics was found adequate to describe changes in total colour difference (TCD) and non-enzymatic browning (NEB). Dependence of the rate constant followed the Arrhenius relationship. The process activation energies (E _a) for Hunter L × b value, TCD, NEB and TC were 29.96, 27.21, 27.48 and 55.61 kJ/mol, respectively. Higher E _a for TC content indicated greater temperature sensitivity as compared with other colour parameters. Relationship of TC content and Hunter L × b value was found to be more consistent through regression analysis with R ² ≥ 0.979.     

Textural and pasting properties of potatoes (Solanum tuberosum L.) as affected by storage temperature

Fresh tubers from five potato (Solanum tuberosum L.) cultivars were stored at different temperatures (4, 8, 12, 16 and 20 °C) and 80–90% relative humidity for 18 weeks after harvest to examine the effect of storage temperature on their textural and pasting properties. Texture profile analysis was performed on raw and cooked potatoes using an Instron universal testing machine to measure textural parameters such as fracturability, hardness, cohesiveness, adhesiveness and springiness. Both raw and cooked potato tubers showed a considerable reduction in all textural parameters upon storage, irrespective of the storage temperature employed. Raw potatoes showed a decrease in fracturability and hardness with increasing storage temperature, whereas their cooked counterparts showed the opposite trend. The extent of change in the textural properties of both raw and cooked potatoes also varied among the different cultivars. Fresh and stored tubers from all cultivars were freeze‐dried, ground into flours and analysed for amylose content and pasting properties. The amylose content of flours prepared from potatoes stored at 4 and 8 °C was observed to be considerably lower than that of flours prepared from potatoes stored at 16 and 20 °C. Pasting characteristics such as peak viscosity, setback and final viscosity increased with increasing storage temperature, while the reverse was observed for pasting temperature, when studied using a rapid visco analyser. Breakdown in viscosity of the flour pastes from all cultivars was considerably reduced during storage, irrespective of the storage temperature employed. Copyright © 2006 Society of Chemical Industry     

Colour measurement of fish minces using hunter L,a, b values

Hunter L, a and b values are used to order fish mince colour according to species or processing parameters. Mince colour difference (ΔE) or statistical examination of L, a and b values are used to establish a 3-dimensional plot to illustrate colour differences between samples.     

Optimization of the roasting of robusta coffee (C. canephora conillon) using acceptability tests and RSM

With the objective of optimizing the roasting of robusta coffee (Coffea canephora Conillon), a two factor central composite design (11 samples) was used to optimise the settings for roasting time and the initial internal temperature of the roaster drum on response variables of acceptance with 25 consuming assessors, for the sensory attributes of beverage aroma, flavour and colour. Predictive models were also obtained for the instumental measurement of the colour of the beans and ground coffee. The optimum range for roasting was shown to be a time of 22–28 min at a temperature of 225–230°C, corresponding to the degree of roasting characterized by the following range of colour of roasted robusta beans: L* between 37.05 and 40.69, a* between 2.29 and 4.15 and b* between 2.70 and 6.29.     

Influence of seed roasting process on the changes in composition and quality of sesame (Sesame indicum) oil

The composition and quality changes of sesame oils prepared at different roasting temperatures (180–260°C) from sesame seed were evaluated and compared with an unroasted oil sample. There were no apparent differences in characteristics, such as acid value, iodine value, saponification value and refractive index, of sesame oils prepared at a roasting temperature between 180 and 220°C. The colour units and total polar content of oils increased in relation to an increase in roasting temperature. The phospholipid content was reduced from 690 mg kg^?1 in unroasted oil to 0 mg kg^?1 in the oil prepared using a 260°C roasting temperature. The fatty acid content of the oil was reduced markedly, especially in oleic and linoleic acids, when the roasting temperature was over 220°C. The amounts of chlorophyll and sesamolin decreased with increasing roasting temperature. However, the highest level of sesamol and γ-tocopherol was found in oils prepared with a 200–220°C roasting temperature. The sesame oil prepared at a 200°C roasting temperature had the best flavour score when compared with the other samples.     

Effect of relative humidity,storage days,and packaging on pecan kernel texture: Analyses and modeling

The studies expounding on the effects of storage conditions on texture changes are limited. The researchers have been proposing methods to measure pecan texture instrumentally. But current protocols and/or attributes fail to address huge variability during experimentation. Additionally, there are no predictive models to estimate changes in pecan texture during storage. This study addresses all the above concerns and investigates the effects of different relative humidity (RH, 30–90%) and packaging material (Polyethylene-Nylon [PEN], polypropylene [PP], low density polyethylene [LDPE], and metallic laminates [ML]) on pecan texture, introducing a rift ratio (F/H or fracturability to hardness ratio) to address variability in the data and predictive model to estimate changes in the textural attribute of pecans during storage. The textural analysis was conducted on pecan cores and intact pecans to measure the area under curve, fracturability, hardness, cohesiveness, chewiness, springiness, and rift ratio. It was observed that values for the rift ratio obtained using the intact pecan method had high R² (0.72) as compared to the rest of the textural attributes. A three-parameter logistic model was employed to predict pecan texture during storage. The pecans stored at 75, 80, and 90% reached the rift ratio (F/H) of 0.5 at approx. 115, 3, and 0.15 days (~ 4 hr), respectively. Similarly, pecans stored in LDPE, PP, and PEN packs at 80% reached rift ratio (F/H) of 0.5 at approx. 26, 57, and 78 days, respectively. The presence of any kind of package delayed fracturability loss by at least eight folds at 80% RH. The pecans stored in ML did not experience a significant change in textural attributes     

Effect of non‐isothermal processing and moisture content on the anthocyanin degradation and colour kinetics of cherry pomace

Anthocyanins (ACY) and colour changes in cherry pomace under non‐isothermal processing were investigated. Pomace at moisture levels of 70% (MC‐70), 41% (MC‐41) and 25% (MC‐25) was heated at 126.7 °C in a retort for 25, 40 and 60 min. Total ACY, Hunter colour values, total colour difference (ΔE), chroma, hue angle (h°) and browning index (BI) were analysed. Thermal degradation kinetics for colour parameters were determined using zero‐ and first‐order models. ACY degradation increased with heating time and ranged from 34 to 68% for 25 and 60 min heating, respectively. The half‐life of ACY was 38, 33 and 27 min for MC‐70, MC‐41 and MC‐25 pomace, respectively. The ΔE increased with increasing heating time, whereas BI exhibited an inverse trend. Except for ?E for MC‐70, the zero‐order kinetic model showed better fit (R² = 0.85–0.97) to experimental data than the first‐order kinetic model for Hunter colour b values and ?E.     

Roasting influences on molecular species of triacylglycerols in sesame seeds (Sesamum indicum)

Sesame seeds were roasted at different temperatures (180–220 °C) using a domestic electric oven. Molecular species and fatty acid distributions of triacylglycerols (TAGs) isolated from total lipids in the sesame seeds were analysed by a combination of argentation thin‐layer chromatography (TLC) and gas–liquid chromatography. A modified argentation TLC procedure, developed to optimise the separation of the complex mixture of total TAGs, provided 11 different groups of TAGs, based on both the degree of unsaturation and the total length of fatty acid groups. Fatty acid methyl ester analysis was performed to determine the composition of each zone. Eleven molecular species of TAGs were still detected in the sesame seeds following roasting treatment. Dilinoleolein (33.7–35.8%), palmitoleolinolein (20.3–22.8%), dioleolinolein (15.0–15.4%) and trilinolein (8.8–10.7%) were the main components during roasting. However, roasting for 10 min at 220 °C caused a significant decrease (P < 0.05) not only in molecular species containing more than four double bonds, but also in the amount of diene and triene species present in TAGs (with a few exceptions). These results suggest that no significant changes in molecular species or fatty acid distribution of TAGs would occur within 25 min of roasting at 180 °C, ensuring that a good‐quality product would be attained. © 2000 Society of Chemical Industry     

Effect of oat β‐glucan and its oxidised derivative on the quality characteristics of sponge cake

The objective of this study was to investigate the characteristics of sponge cakes containing native oat β‐glucan (BG‐B) and its oxidised derivative with TEMPO (2, 2, 6, 6‐tetramethyl‐1‐piperidine oxoammonium ion) (Oxi‐B). BG‐B and Oxi‐B were substituted at 1% (w/w) into a formulation, and then the effects of BG‐B and Oxi‐B addition on the pasting properties of wheat flour and the physicochemical and textural properties of sponge cakes were determined. The pasting parameters of wheat flour were increased by BG‐B, whereas they were decreased in wheat flour with added Oxi‐B. The cake containing Oxi‐B had a lower volume, and a higher symmetry and uniformity than the BG‐B cake. The Oxi‐B cake exhibited smaller L* and b* values and a higher a* value than the control in crumb and crust colour. According to texture profile analysis, the BG‐B cake had increased hardness, chewiness and gumminess, whereas the Oxi‐B cake had decreased hardness.