共查询到20条相似文献,搜索用时 765 毫秒
1.
随着GPS和GIS技术的发展,GPS和GIS的结合已成为导航定位的发展方向.本文基于GPS/GIS导航定位功能,给出了利用TETRA数字集群网络短数据业务实现TETRA终端导航定位系统的方案. 相似文献
2.
3.
4.
5.
6.
7.
8.
9.
海洋倾废航行数据记录仪国家海洋局海洋技术研究所姜洪川,李林奇,王建忠一、刚目全球卫星定位系统(GPS)的问世,是国际导航定位技术的一场革命。充分利用这一先进的导航定位技术资源,开拓和扩大GPS应用领域,为国民经济和国防建设服务,是我国科技工作者应该高... 相似文献
10.
11.
导航与定位是自主移动机器人研究的重点,是实现移动机器人智能化的核心技术。本文从全区域覆盖移动机器人面临的实际环境,综合光电编码器、磁航向角传感器和LMS221系列激光雷达的特性设计一种混合定位系统。通过理论分析,论述同时定位与地图创建方法(SLAM)在导航系统中应用的可行性和解决方案。 相似文献
12.
This paper proposes a precise localization algorithm for a quickly moving mobile robot.In order to localize a mobile robot with active beacon sensors,a relatively long time is needed,since the distance to the beacon is measured by transmitting time of the ultrasonic signal.The measurement time does not cause a high error rate when the mobile robot moves slowly.However,with an increase of the mobile robot’s speed,the localization error becomes too high to use for accurate mobile robot navigation.Therefore,in this research into high speed mobile robot operations,instead of using two active beacons for localization,an active beacon and dual compass are utilized to localize the mobile robot.This new approach resolves the high localization error caused by the speed of the mobile robot.The performance of the precise localization algorithm is verified by comparing it to the conventional method through real-world experiments. 相似文献
13.
未知环境移动机器人自主导航是当前的研究热点.同步定位与建图是实现移动机器人自主导航的关键环节.目前,许多学者通过激光测距仪、声呐、相机等设备来研究同步定位与建图.本文提出了由一台笔记本控制携带Kinect传感器移动机器人获取信息,再通过独立工作站创建未知环境全局地图的方案.其中,笔记本获取的信息(深度数据)通过无线传输给工作站.Gmapping(一种高效的Rao-Blackwellized粒子滤波器将激光扫描数据生成栅格地图)参数被优化来提高地图创建质量和激光扫描数据精度.通过Turtlebot进行实验验证了本文所提方案的有效性. 相似文献
14.
机器人路径规划是移动机器人导航的核心技术之一.移动规划技术近年发展迅速,涌现出了许多规划方法,在环境描述方式和技术的基础上,总结了机器人发展史上具有典型意义的规划方法,探讨了几种路径规划方法,分析了栅格分解法、人工势场法、同步定位与地图构建法,并指出了其各自的性能. 相似文献
15.
应用同时定位与地图创建理论建立全区域覆盖移动机器人导航系统,融合航位推算理论和基于环境特征的定位方法,设计了基于光电编码器--磁航向传感器组合和LMS激光雷达的混合定位系统.使用扩展Kalman滤波技术完成了基于特征直线的机器人位置更新.通过计算机仿真,结果表明建立的混合定位系统和同时定位与地图创建方法是一种切实可行的全区域覆盖移动机器人的导航方法. 相似文献
16.
17.
18.
Kyu Bum Han Hae Young Kim Yoon Su Baek 《Journal of Mechanical Science and Technology》2001,15(8):1097-1107
In this paper, the wall following navigation algorithm of the mobile robot using a mono vision system is described. The key points of the mobile robot navigation system are effective acquisition of the environmental information and fast recognition of the robot position. Also, from this information, the mobile robot should be appropriately controlled to follow a desired path. For the recognition of the relative position and orientation of the robot to the wall, the features of the corridor structure are extracted using the mono vision system, then the relative position, the offset distance and steering angle of the robot from the wall, is derived for a simple corridor geometry. For the alleviation of the computation burden of the image processing, the Kalman filter is used to reduce search region in the image space for line detection. Next, the robot is controlled by this information to follow the desired path. The wall following control scheme by the PD control scheme is composed of two control parts, the approaching control and the orientation control, and each control is performed by steering and forward-driving motion of the robot. To verify the effectiveness of the proposed algorithm, the real time navigation experiments are performed. Through the result of the experiments, the effectiveness and flexibility of the suggested algorithm are verified in comparison with a pure encoder-guided mobile robot navigation system. 相似文献
19.
胡劲草 《传动技术(上海)》2006,20(4):14-18,46
定位是确定机器人在其工作环境中所处位置的过程.应用各种传感器感知信息实现可靠的定位是自主式移动机器人最基本、也是最重要的一项功能之一.本文对室内自主式移动机器人的定位技术进行了综述,介绍了当前自主式移动机器人定位方法的研究现状.同时,对国内外具有典型性的研究方法进行了较详细的介绍,并重点提出了几种室内自主式移动机器人通用的定位方法,对其中的地图构造、位姿估计方法进行了详细介绍.最后,论述了自主式移动机器人定位系统与地图构造中所面临的主要问题及其解决方法并指出了该领域今后的研究方向. 相似文献
20.
轮式移动机器人轨迹跟踪的预测控制 总被引:6,自引:0,他引:6
自动导航小车 (AGV)是一种移载用轮式移动机器人 (WMR) ,主要用于现代化的无人生产车间中实现物料的搬运。为完成搬运任务 ,其控制系统必须具备定位、路径规划和导航等功能。考虑到其工作任务的特殊性 ,作者设计了一种运动控制系统———组合导航预测控制系统。理论分析和仿真结果均表明 ,该控制系统是有效可靠的。 相似文献