共查询到19条相似文献,搜索用时 109 毫秒
1.
阐述了一种用VisualBasic编程,基于GPIB(通用接口总线)的软件测试系统。系统的功能是模拟ASE(宽谱光源)光源和光谱仪的作用,实现计算机控制自动测试DWDM(波分复用器)的某一个信道的光谱。介绍了自动测试系统的构成,详细阐述了软件的设计思想。 相似文献
2.
光分插复用器是集成光学的重要单元器件之一。针对光分插复用器在十字交叉处存在损耗问题,研究了交叉耦合系数对信道波导与微环间距和各信道输出光谱的影响。用耦合模理论推导了各信道输出光谱的解析表达式,并对光谱图进行分析。研究发现,信道波导与微环间距为66.16nm时,交叉耦合系数最小,交叉耦合系数的存在使谱线呈法诺共振曲线。由对数值解和仿真解的比较,得出仿真解与数值解吻合得很好。 相似文献
3.
现有的压力测试仪难以适应石油石化等对高等级防爆要求的特殊行业的技术需求,文中采用独立设计的波登管光纤光栅压力传感器与密集型波分复用器(DWDM)解调技术相结合,并与微光探测技术、光电开关技术进行有效集成,同时借助自行开发的信号处理软件,研制出一种完整的全光纤压力测试仪。该测试仪系统集成性强、自动化程度高,压力测试仪的传感器波长调谐灵敏度为0.28 nm/MPa,引用误差为1%。 相似文献
4.
5.
自20世纪90年代DWDM系统商用以来,已迅速成为长途传输的主流方式.2000年以来,铁路以8横8纵为基础,相继建成了五大DWDM基础光传输网络环.如今伴随DWDM技术的广泛普及,传输网的维护与传统方式相比也有了较大区别.通过分析DWDM优势,以及铁路应用现状,结合相关文献和工作经验与大家讨论一下几种DWDM故障判断与定位的常用方法. 相似文献
6.
7.
《仪表技术与传感器》2016,(3)
利用密集型波分复用器实现光纤光栅压力传感器的高灵敏度解调,通过实验得到双通道波分复用器2个边翼的透射谱分布,并构建了分段连续函数方程,实现了双边缘解调,解调的范围比单边缘扩大一倍,实验表明在0~3.6MPa范围内,该测试系统的引用误差小于1%,强度分辨力高于稀疏型波分复用器2个数量级。 相似文献
8.
9.
10.
11.
Chien-Wei Wu W.L. Pearn 《The International Journal of Advanced Manufacturing Technology》2005,25(5-6):533-541
The couplers and wavelength division multiplexers have been widely used in high-speed, high-volume image data transmission systems to provide sufficient bandwidth and smaller channel spacing for greater throughput. In this paper, we develop a method for measuring the manufacturing capability of a process making couplers and wavelength division multiplexers. The proposed method measures the process capability of reproducing product items meeting the manufacturing specifications where multiple product quality characteristics are involved, including the polarization dependent loss, and the insertion loss, which are critical in fiber-optic transmission quality. 相似文献
12.
13.
14.
15.
A. I. Kozlov 《Optoelectronics, Instrumentation and Data Processing》2010,46(1):96-105
Design principles of silicon multiplexers for linear and matrix infrared (IR) focal plane arrays (FPAs) are considered. Silicon
multiplexers intended for operation with multielement mercury-cadmium-tellurium (MCT) photodiode detectors, with multielement
photoresistor detectors based on multilayer structures with quantum wells, and with other types of photodetectors sensitive
to radiation in the IR ranges from 3 to 5 and from 8 to 16 μm, are discussed. The type and size range of the multiplexers
includes 19 models that differ in frame sizes, input circuits, charge capacity, and cell pitch. Around the designed multiplexers,
hybrid and monolithic FPAs of various formats for medium and far IR ranges with a rather high temperature resolution (< 0.02
K) have been developed. 相似文献
16.
A. I. Kozlov I. V. Marchishin V. N. Ovsyuk 《Optoelectronics, Instrumentation and Data Processing》2007,43(4):351-357
Principles of designing and functioning the 320 × 256 frame and row integration matrix multiplexers are considered. The temperature resolution of the MCT IR FPA and the designed multiplexers is analyzed. 相似文献
17.
18.
19.
A Radio Frequency (RF) based digital data transmission scheme with 8 channel encoder/decoder ICs is proposed for surface electrode switching of a 16-electrode wireless Electrical Impedance Tomography (EIT) system. A RF based wireless digital data transmission module (WDDTM) is developed and the electrode switching of a EIT system is studied by analyzing the boundary data collected and the resistivity images of practical phantoms. An analog multiplexers based electrode switching module (ESM) is developed with analog multiplexers and switched with parallel digital data transmitted by a wireless transmitter/receiver (Tx/Rx) module working with radio frequency technology. Parallel digital bits are generated using NI USB 6251 card working in LabVIEW platform and sent to transmission module to transmit the digital data to the receiver end. The transmitter/receiver module developed is properly interfaced with the personal computer (PC) and practical phantoms through the ESM and USB based DAQ system respectively. It is observed that the digital bits required for multiplexer operation are sequentially generated by the digital output (D/O) ports of the DAQ card. Parallel to serial and serial to parallel conversion of digital data are suitably done by encoder and decoder ICs. Wireless digital data transmission module successfully transmitted and received the parallel data required for switching the current and voltage electrodes wirelessly. 1 mA, 50 kHz sinusoidal constant current is injected at the phantom boundary using common ground current injection protocol and the boundary potentials developed at the voltage electrodes are measured. Resistivity images of the practical phantoms are reconstructed from boundary data using EIDORS. Boundary data and the resistivity images reconstructed from the surface potentials are studied to assess the wireless digital data transmission system. Boundary data profiles of the practical phantom with different configurations show that the multiplexers are operating in the required sequence for common ground current injection protocol. The voltage peaks obtained at the proper positions in the boundary data profiles proved the sequential operation of multiplexers and successful wireless transmission of digital bits. Reconstructed images and their image parameters proved that the boundary data are successfully acquired by the DAQ system which in turn again indicates a sequential and proper operation of multiplexers as well as the successful wireless transmission of digital bits. Hence the developed RF based wireless digital data transmission module (WDDTM) is found suitable for transmitting digital bits required for electrode switching in wireless EIT data acquisition system. 相似文献