Investigation of mineral content of root canal dentin after the application of various antibiotic paste using energy‐dispersive X‐ray detector

The purpose of this study was to evaluate mineral content of root canal dentin after treatment with different antibiotic pastes including the mixture of metronidazole, ciprofloxacin, doxycycline, cefaclor, amoxicillin, or minocycline. Fifty extracted maxillary canine teeth were randomly divided into five groups (n = 10 teeth for each group). Root canals were prepared Reciproc rotary files. Canals were irrigated using 5 ml 5% NaOCl and 1 ml 15% EDTA. Each tooth in all groups were longitudinally splitted into two pieces as a control and experimental samples. Each experimental group received following antibiotic paste; double antibiotic paste (DAP) and triple antibiotic paste with doxycycline (TAPd), TAP with cefaclor (TAPc), TAP with amoxicillin (TAPa), and TAP with minocycline (TAPm) for 21 days. The Ca, P, Mg, Ca, and K levels, and the Ca/P ratio was analyzed by a scanning electron microscope (SEM) equipped using a Bruker energy‐dispersive X‐Ray (EDX) detector. Data were analyzed with independent samples t‐test, one‐way anova, and Duncan tests. Ca and Ca/P ratio showed a statistically significant increase TAP with amoxicillin and cefaclor (p < .05). DAP, TAPd, and TAPm did not change the mineral levels (p > .05). TAPa and TAPc with increased the Ca level and Ca/P ratio of the root canal dentin which consequently positively influences the revascularization process.     

Influence of Trigonella foenum graecum seed extract as root canal irrigation agent on root surfaces: A scanning electron microscope/energy dispersive X‐ray analysis study

The purpose of this in vitro study was to investigate the effect of Trigonella foenum graecum seed extract (TFGSE) as a root canal irrigation agent on the surface of instrumented root canals and on changes in the mineral contents of the root dentin. A total of 90 extracted human mature maxillary central incisor teeth with a single root and without root resorption were selected. The specimens were subdivided into five groups according to irrigation protocol groups G0: distilled water (n = 15): G1: Sodium hypochlorite (5.25% NaOCl); G2: 1% TFGSE G3: NaOCl +17% EDTA (3 min); G4: NaOCl+1% TFGSE; G5: 1% TFGSE +17% EDTA. All the roots were sectioned longitudinally into two halves and examined under scanning electron microscope/energy dispersive X‐ray analysis (SEM/EDX) to assess changes in the mineral content of the tooth. Smear layer removal from root canals was evaluated with scanning electron microscopy (SEM). A statistical analysis was performed using the Kruskal–Wallis test. The most effective irrigation protocols in removing smear layer occurred with TFGSE and NaOCl, both with rinsing with 17% EDTA. TFGSE was more effective than NaOCl for removing the smear layer. The results showed the ability of 1% TFGSE to remove the smear layer from the root canals. TFGSE is a promising alternative irrigation agent for root canals.     

Effect of passive ultrassonic instrumentation as a final irrigation protocol on debris and smear layer removal—a sem analysis

This study sought to evaluate the efficacy of passive ultrasonic irrigation (PUI) on removing the smear layer and debris from root dentin using scanning electron microscopy (SEM). Twenty‐five bovine incisors were manually prepared and divided into three groups according to the final irrigation protocol: EDTA, final irrigation with 12 mL of 17% EDTA for 3 minutes followed by 5 mL of 2.5% NaOCl; EDTA/PUI, final flush with 4 mL of 17% EDTA and PUI for 30 seconds. These procedures were repeated three times to standardize the volume of the irrigant. Control group, after preparation, the specimens were irrigated only with 17 mL of 2.5% NaOCl. The roots were fractured and analyzed using SEM. The intragroup analysis revealed that the EDTA/PUI protocol removed a higher amount of debris at the cervical third (P = 0.03). The intergroup analysis revealed that EDTA/PUI presented the lowest amount of debris at the cervical third (P = 0.007). Smear layer scores were higher in the control group compared with the EDTA and EDTA/PUI groups, but only at the cervical third (P = 0.02). None of the final irrigant protocols completely removed the smear layer and debris. EDTA/PUI only improved the removal of debris at the cervical third. Microsc. Res. Tech. 76:496–502, 2013. © 2013 Wiley Periodicals, Inc.     

Effect of time and ultrasonic activation on ethylenediaminetetraacetic acid on smear layer removal of the root canal

The aim of this study was to assess the effect of time and the ultrasonic activation of ethylenediaminetetraacetic acid (EDTA) in removing the smear layer of at root canal. A total of 60 bovine inferior incisors were transversely sectioned and instrumented; A smear layer was added in the root dentin surface. The specimen were then divided into six groups according to the following final irrigation protocols: Group (G) 1: conventional irrigation with sodium hypochlorite (NaOCl); G2: conventional irrigation with NaOCl + EDTA for 20 s; G3: conventional irrigation with NaOCl + EDTA for 60 s; G4: passive ultrasonic irrigation (PUI) with NaOCl; G5: PUI with NaOCl + PUI with EDTA for 20 s; G6: PUI + NaOCl and PUI with EDTA for 60 s. Samples were analyzed by scanning electron microscope (SEM) at ×500 increase. The images were measured by three blinded evaluators and classified in scores ranging from 1 to 5. The results were analyzed by the Pearson correlation test and the ANOVA nonparametric Kruskal–Wallis and Dunn's tests were used for the comparisons. Irrigated samples only with NaOCl (G1 and G4) had higher scores when compared with other groups. G5 and G6, irrigated with 17% EDTA and ultrasonic irrigation had lower scores. However, there was no statistically significant difference in G2 and G3, where there was no irrigation. It was concluded that irrigation with 17% EDTA for 20 s promoted the effective removal of smear layer, regardless of ultrasonic irrigation.     

Effect of rotary instrument associated with different irrigation techniques on removing calcium hydroxide dressing

Calcium hydroxide [Ca(OH)₂] residues in root canals may compromise sealing of filling and endodontic treatment success. The aim of this study was to compare the efficacy of using rotary instrument associated with EndoActivator, EndoVac, passive ultrasonic irrigation (PUI), and conventional needle irrigation (CNI), in Ca(OH)₂ removal from root canal, by means of scanning electron microscopy (SEM) images. Sixty‐six human canines were prepared with the Protaper system up to F5 and filled with Ca(OH)₂. After 7 days, Ca(OH)₂ was removed with rotary instrument F5 associated with the irrigation techniques used in each group (n = 15): GI (CNI), GII (EndoVac), GIII (EndoActivator) and GIV (PUI). In all groups 15 mL of 2.5% NaOCl and 3 mL of 17% EDTA were used for Ca(OH)₂ removal. The Ca(OH)₂ residues was evaluated by SEM in the middle and apical third using a system of scores. The results were analyzed by the Kruskal‐Wallis and Dunn tests (α = 0.05). None of the techniques completely removed the Ca(OH)₂ from root canals. There was no difference between EndoActivator, EndoVac and PUI (P > 0.05), but the three techniques removed more Ca(OH)₂ than the CNI (P < 0,05), in the middle and apical thirds of the root canal. It was concluded that the rotary instrument combined with EndoActivator, EndoVac, and PUI was shown to be more efficient than the rotary instrument combined with the CNI in removing Ca(OH)₂ from the root canal. Microsc. Res. Tech. 77:642–646, 2014. © 2014 Wiley Periodicals, Inc.     

Peracetic acid as a single endodontic irrigant: effects on microhardness,roughness and erosion of root canal dentin

The aim was to assess the effects of 1% peracetic acid (PAA) as a single endodontic irrigant on microhardness, roughness, and erosion of root canal dentin, compared with 2.5% sodium hypochlorite (NaOCl) and with 2.5% NaOCl combined with 17% EDTA. Forty human, single‐rooted tooth hemisections were submitted to Knoop microhardness test, before and after the following irrigation protocols: PAA = 1% PAA; NaOCl = 2.5% NaOCl; NaOCl‐EDTA‐NaOCl = 2.5% NaOCl +17% EDTA +2.5% NaOCl; and SS = saline. Another 40 roots were instrumented, irrigated with the same protocols, and sectioned longitudinally. The roughness analysis was performed on the mesial section using a confocal laser scanning microscope, whereas erosion was analyzed on each third of the distal section, using a scanning electron microscope. The data were analyzed using ANOVA and Tukey post‐tests, and Kruskal‐Wallis and Dunn post‐tests (α = .05). The PAA and NaOCl‐EDTA‐NaOCl groups showed no significant differences (p > .05); both promoted reduction in microhardness and increase in roughness, compared with the NaOCl and SS groups (p < .05). NaOCl‐EDTA‐NaOCl promoted higher erosion in the cervical and middle thirds than the other groups (p < .05); there was no difference among PAA, NaOCl, and SS (p > .05). There was also no difference among the groups regarding the apical third (p > .05). PAA used as a single endodontic irrigant caused reduction in root canal dentin microhardness and increase in roughness in a similar way to NaOCl‐EDTA‐NaOCl; however, PAA caused less erosion than NaOCl‐EDTA‐NaOCl.     

Tubular dentin sealer penetration after different final irrigation protocols: A confocal laser scanning microscopy study

The aim of this study was to evaluate tubular dentin sealer penetration, comparing different final irrigation protocols using a conventional needle (CONV), EndoActivator system (EAS), EndoVac system (EVS), and ultrasound (PUI). Initially, fifty‐two first maxillary molars with a single canal in the palatal root, without abrupt curvatures, resorptive processes, or previous endodontic treatment were selected for this study. Then, the crowns were sectioned to obtain palatal roots 15 mm in length. The root canals were prepared with the ProTaper Universal System and irrigated with 5% NaOCl. Afterwards, the specimens were divided into four groups (n. 13), according to the final irrigation protocol: CONV, EAS, EVS, and PUI. After filling, slices at 3 mm and 5 mm from the apex were obtained for analysis by confocal laser scanning microscopy. Two‐way comparisons between the groups and the levels were performed with Games Howell's test (p < .05). Tubular dentin sealer penetration was higher at 5 mm compared with 3 mm from the apex (p < .05). The EAS group showed a higher percentage of tubular dentin sealer penetration, compared with the CONV group, at both levels. At 3 mm, there was no statistically significant difference among EAS, EVS, and PUI; however, these groups showed better performance, compared with the CONV group. At 5 mm, there was no statistically significant difference between the EAS and EVS groups, but both showed higher sealer penetration than the PUI group (p < .05). The EAS and EVS groups achieved better degrees of tubular dentin sealer penetration, compared with the other groups.     

Effect of EDTA,sodium, and calcium hypochlorite on the inorganic component of root canal dentin: A SEM analysis

This study evaluated the influence of canal irrigation protocols with 5.25% calcium hypochlorite [Ca(OCl)₂], 5.25% sodium hypochlorite (NaOCl) and 17% EDTA solution on the inorganic component of root canal dentin. Sixty roots were randomly divided into six groups (n = 10): Saline solution (SS) (control); Saline solution (SSE) +17% EDTA; CH ? 5.25% Ca(OCl)₂; CHE ? 5.25% Ca(OCl)₂ + 17% EDTA; SH ? 5.25% NaOCl; SHE ? 5.25% NaOCl +17% EDTA. After canal irrigation, the specimens were longitudinally split and analyzed by scanning electron microscopy (SEM). Dentinal tubules were observed in transverse (middle and apical thirds) direction. The images were classified in scores, according to smear layer removal and peritubular dentin alteration, and data were analyzed by Kruskal–Wallis's test, followed by Dunn's test (α = 0.05). In the middle third, all groups with EDTA presented better removal of the smear layer with higher peritubular dentin alteration (p < .05). In the apical third, this happened only in SHE (p < .05). Ca(OCl)₂ and NaOCl exhibit similar performance to remove smear layer and alteration of the inorganic component in the middle third. In the apical third, NaOCl associated with EDTA showed better performance in smear layer removal.     

The effect of final irrigation with MTAD,QMix, and EDTA on smear layer removal and mineral content of root canal dentin

To compare the smear layer removal ability and mineral content of root canal dentine after initial irrigation with NaOCl and final irrigation with MTAD, QMix, and 17% EDTA. Forty extracted human maxillary incisors before root canal preparation and irrigation with NaOCl were randomly divided into four groups (n = 10) according to the type of final irrigants used: MTAD, QMix, 17% EDTA, and control (sterile distilled water). Scanning electron microscopy (SEM) was used to assess the presence of smear layer. SEM energy‐dispersive X‐ray spectroscopy was used to quantify dentin mineral composition in MTAD, QMix, 17% EDTA group, and in no‐treatment samples (no‐treatment group; n = 10). Among the various chelating agents, there were no significant differences in the smear layer removal in the middle and coronal thirds (p > .05). In the apical third, QMix removed significantly more smear layer than 17% EDTA (p < .05), but similarly to MTAD (p > .05). Final irrigation with MTAD resulted in a significant increase in the carbon (C) value compared to EDTA (p < .001). There was no significant difference in the mineral composition between the MTAD and the QMix group, although the values of the mineral elements were significantly altered in the MTAD group. QMix had smear layer removal capability similar to MTAD but better than EDTA in the apical third. MTAD yielded the most pronounced effect on mineral component of root dentin; however, differences were significant only for C level compared to 17% EDTA.     

Comparison of different irrigation activation techniques on smear layer removal: An in vitro study

The purpose of this study was to evaluate the efficiency of different irrigation activation techniques on smear layer removal. About 80 single‐rooted human maxillary central teeth were decoronated to a standardized length.The samples were prepared by using ProTaper system to size F4 and divided into eight equal groups (n = 10) according to the final irrigation activation technique; distilled water was used as an irrigant in Group 1. The other groups were treated with 2.5% NaOCl and 17% EDTA, respectively. Conventional syringe irrigation (CSI) was used in Group 2. Irrigation solutions were activated using passive ultrasonic irrigation (PUI, Group 3), EndoVac apical negative pressure (ANP, Group 4), diode laser (Group 5), Nd:YAG laser (Group 6), Er:YAG laser (Group 7), and Er:YAG laser using with photon‐induced photoacoustic streaming (PIPS?, Group 8). Teeth were split longitudinally and subjected to scanning electron microscope (SEM). PIPS showed the best removal of smear layer when compared with PUI, ANP, Nd:YAG, and Er:YAG, but the difference was not statistically significant (P > 0.05). Smear layer scores obtained with PIPS technique were statistically significant different from those of obtained with control, CSI and diode laser groups (P < 0.05). All experimental irrigation techniques except ANP and diode laser removed smear layer more effectively at the coronal and middle levels compared to the apical level (P < 0.05). Irrigation activated/delivered techniques except diode laser have a positive effect on removing of smear layer. Microsc. Res. Tech. 78:230–239, 2015. © 2015 Wiley Periodicals, Inc.     

Evaluation of different irrigation protocols concerning the formation of chemical smear layer

The aim of this work was to evaluate, by means of scanning electron microscopy (SEM) and electron dispersive spectroscopy (EDS), the different irrigation protocols concerning the formation of chemical smear layer (CSL). Fifty‐five teeth were instrumented by using distilled water (DW) as irrigant. Next, the teeth were submitted to a protocol for removal of the mechanical smear layer produced. The teeth were divided into 11 groups, according to irrigation regimen. Then, the teeth were prepared and analyzed with SEM and EDS. Only in Group 1 [1 mL sodium hypochlorite (NaOCl) + 10 mL DW + 1 mL chlorhexidine (CHX) solution], Group 2 [1 mL NaOCl + 10 mL DW + 1 mL ethylenediaminetetraacetic acid (EDTA) + 10 mL DW + 1 mL CHX solution], and Group 3 [1 mL NaOCl + 10 mL DW + 1 mL citric acid (CA) + 10 mL DW + 1 mL CHX solution], the formation of CSL was observed. In the groups where CHX gel was used alone or in association with EDTA, CA, phosphoric acid (PA), and CHX solution, no formation of CSL was observed. According to the results found in the cases in which one wants to associate NaOCl with CHX, the protocol using PA (1 mL NaOCl + 10 mL DW + 1 mL PA + 10 mL DW + 1 mL CHX solution) did not induce formation of CSL. Microsc. Res. Tech., 2013. © 2012 Wiley Periodicals, Inc.     

Persistence of endodontic methacrylate-based cement residues on dentin adhesive surface treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of methacrylate‐based cement residues on the dentin, after dentin surface cleaning with ethanol or acetone, with or without previous application of a dentin adhesive. Forty bovine crown fragments were obtained and the dentin surface was washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% ethylenediaminetetraacetic acid application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin‐based cement was rubbed onto the dentine surface with a microbrush applicator. In 20 specimens, previously to cement, a dentin adhesive was applied in all surfaces. After 15 min, the surface was scrubbed with a cotton pellet and moistened with ethanol or acetone, compounding the following groups: G1—99.5% ethanol and G2—acetone, without previous use of dentin adhesive; G3—99.5% ethanol and G4—acetone, with previous use of dentin adhesive. The dentin surface was scrubbed until the cement residues could not be visually detected. Sections were then processed for scanning electron microscopy and evaluated at 500× magnification and scores were attributed to each image according to the area covered by residual sealer, and data were subjected to Kruskal–Wallis at 5% significance. The lower residue presence was observed in G3 (P = 0.005). All surface presented cement residues when acetone was used as cleaning solution (P = 0.0005). The cleaning solutions were unable to completely remove the cement residues from both surfaces. The ethanol used after previous application of the dentin adhesive promoted the lower presence of residues. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Efficacy of the photon‐initiated photoacoustic streaming combined with different solutions on Enterococcus faecalis in the root canals

This study aimed to evaluate the efficacy of different irrigation solutions used in photon‐initiated photoacoustic streaming (PIPS) or conventional needle irrigation (CNI) for eradication of Enterococcus faecalis from artificial root canals. Altogether, 240 artificial root canal samples were included. The models were split and incubated for 2 days to allow formation of E. faecalis biofilm. The models were randomly divided into two groups (n = 120): CNI and laser‐activated irrigation (LAI). Each group was divided into six subgroups according to different irrigation solutions: distilled water, 1% sodium hypochlorite (NaOCl), 2% NaOCl, 5.25% NaOCl, MTAD, and chlorhexidine, respectively. After irrigation, half of the samples (n = 10) were assessed immediately, and the other half of the samples (n = 10) were incubated for 6 hr. Bacterial suspensions were obtained from all samples before and after irrigation, and after incubation, and were quantified adenosine 5′‐triphosphate (ATP) assay kit. The biofilms were examined using fluorescent microscopy and analyzed by Image Pro Plus software. Significant reduction of ATP, average fluorescence density after irrigation, and growth after incubation was obtained in LAI group than in CNI group (p < .05). LAI can improve bacteriostasis effect of 2% NaOCl (p < .05). PIPS improved the antibacterial effect of the 2% NaOCl used in root canal therapy.     

Debris and smear removal in flattened root canals after use of different irrigant agitation protocols

Scanning electron microscopy (SEM) can be used to analyze the presence of debris and smear layer on the internal walls of root canal. This study evaluated the debris and smear removal in flattened root canals using SEM after use of different irrigant agitation protocols. Fifty mandibular incisors were distributed into five groups (n = 10) according to the irrigant agitation protocol used during chemomechanical preparation: conventional syringe irrigation with NaviTip needle (no activation), active scrubbing of irrigant with brush-covered NaviTip FX needle, manual dynamic irrigation, continuous passive ultrasonic irrigation, and apical negative pressure irrigation (EndoVac system). Canals were irrigated with 5 mL of 2.5% NaOCl at each change of instrument and received a final flush with 17% EDTA for 1 min. After instrumentation, the roots were split longitudinally and SEM micrographs at ×100 and ×1,000 were taken to evaluate the amount of debris and smear layer, respectively, in each third. Data were analyzed by Kruskal-Wallis and Dunn's post-hoc tests (α = 5%). Manual dynamic activation left significantly (p < 0.05) more debris inside the canals than the other protocols, while ultrasonic irrigation and EndoVac were the most effective (p < 0.05) for debris removal. Regarding the removal of smear layer, there was no statistically significant difference (p > 0.05) either among the irrigant agitation protocols or between the protocol-canal third interactions. Although none of the irrigant agitation protocols completely removed debris and smear layer from flattened root canals, the machine-assisted agitation systems (ultrasound and EndoVac) removed more debris than the manual techniques.     

Efficacy of ethylene‐diamine‐tetra‐acetic acid associated with chlorhexidine on intracanal medication removal: A scanning electron microscopy study

The aim of this study was to evaluate the effectiveness of 17% ethylene‐diamine‐tetra‐acetic acid (EDTA) used alone or associated with 2% chlorhexidine gel (CHX) on intracanal medications (ICM) removal. Sixty single‐rooted human teeth with fully formed apex were selected. The cervical and middle thirds of each canal were prepared with Gates Glidden drills and rotary files. The apical third was shaped with hand files. The specimens were randomly divided into two groups depending on the ICM used after instrumentation: calcium hydroxide Ca(OH)₂+CHX or Ca(OH)₂+sterile saline (SS). After seven days, each group was divided into subgroups according to the protocol used for ICM removal: instrumentation and irrigation either with EDTA, CHX+EDTA, or SS (control groups). All specimens were sectioned and processed for observation of the apical thirds by using scanning electron microscopy. Two calibrated evaluators attributed scores to each specimen. The differences between the protocols for ICM removal were analyzed with Kruskal‐Wallis and Mann‐Whitney U tests. Friedman and Wilcoxon signed rank tests were used for comparison between the score of debris obtained in each root canal third. Remains of Ca(OH)₂ were found in all specimens independently of the protocol and ICM used (P > 0.05). Seventeen percent EDTA showed the best results in removing ICM when used alone (P < 0.05), particularly in those associated with CHX. It was concluded that the chelating agent 17% EDTA significantly improved the removal of ICM when used alone. Furthermore, the type of the vehicle associated with Ca(OH)₂ also plays a role in the ICM removal. Microsc. Res. Tech. 77:735–739, 2014. © 2014 Wiley Periodicals, Inc.     

Morphological and chemical changes in human deciduous dentin after phosphoric acid,self‐etching adhesive and Er: YAG laser conditioning

The morphological and chemical changes in deciduous dentin produced by different conditioning protocols were evaluated in this in vitro study. Eighty primary dentin samples were divided into eight groups (n = 10): G1, acid etching; G2, self‐etching adhesive; G3, G4, Er: YAG laser irradiation at 25.5 and 38.2 J cm^?2, respectively; 10 Hz and spray irrigation. Groups 5, 6, 7, and 8 were irradiated at previous densities, and then phosphoric acid or self‐etching adhesive conditioning was applied. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy (EDS) were used to evaluate chemical and morphological changes. Paired t‐test and One‐way ANOVA were used for statistical analysis (p ≤ 0.05). All samples showed different morphology with specific characteristics according to the conditioning protocol. Changing element concentration values are expressed in atomic percent (at %). After conditioning, there were statistically significant differences (p ≤ 0.05) for p at% and Ca/P in all groups; highlighting the following additional findings by group: G1, G7, and G8 showed changes in all elements studied, G2 presented a decrease in C at% and increased Ca at%, G3 and G4 exhibited at% changes in C, trace elements and Ca. Furthermore, G5 showed at% changes in O and trace elements; while G6 changes were observed on C at%, O at% and trace elements at%. Dentin morphology and chemical composition varied in accordance with the conditioning protocol, with characteristics specific for each one that could have clinical implications for the retention and bond strength performance of adhesive materials.     

Residues of calcium hydroxide-based intracanal medication associated with different vehicles: a scanning electron microscopy evaluation

This study evaluated the presence of residues after removal of calcium hydroxide [Ca(OH)(2) ] associated with different vehicles. Thirty single-rooted teeth were instrumented to a master apical file #25 using 2.5% NaOCl as main irrigant and 17% trisodium EDTA (ethylenediaminetetraacetic acid) as final agent irrigant. Then, the root canals were dressed with Ca(OH)(2) associated with silicone oil (Group 1), 2% chlorhexidine gluconate (Group 2), or propylene glycol (Group 3). After coronal sealing, all teeth were kept in a moist environment at room temperature. After 7 days, the teeth were reopened and medicaments were removed using 5 mL of saline solution and instrumentation with master apical file followed by new irrigation with 5 mL of 2.5% NaOCl. Subsequently, teeth were split longitudinally and assessed by scanning electron microscopy. The wall cleanliness of the cervical and apical thirds of the roots were evaluated and scored by three blinded examiners. Statistical analysis was performed using Kruskal-Wallis and Wilcoxon tests at 5% level of significance. All roots had residues of Ca(OH)(2) on the canal walls. All experimental groups had similar results (P > 0.05) regardless of the third evaluated. There was significant difference between the apical and cervical thirds only in Group 3 (P < 0.05). Association of different vehicles to Ca(OH)(2) does not influence the persistence of residues on the root canal walls.     

Effect of different irrigation protocols on the radicular dentin interface and bond strength with a metacrylate‐based endodontic sealer

This study assessed the influence of different endodontic chemical substances on the adhesion of the Epiphany SE/Resilon system (with and without resinous solvent) to radicular dentin walls, using the push‐out test and scanning electron microscopy (SEM). Forty‐eight root canals of human canines were prepared biomechanically with ProTaper rotary files (crown‐down technique) and the radicular dentin was treated with either 17% EDTA, 2% chlorhexidine gel (CHX) or 2.5% NaOCl (control). The root canals were filled with Resilon cones and Epiphany SE sealer with and without resinous solvent. Six groups of eight canals each had their roots sectioned transversally to obtain 1‐mm thick slices. Data were subjected to statistical analysis by ANOVA and Tukey's tests. The specimens treated with 17% EDTA (1.59 ± 0.91) presented higher bond strength (P < 0.05) than those treated with 2.5% NaOCl (0.93 ± 0.27) and 2% CHX (0.92 ± 0.22). Significantly higher bond strength (P < 0.05) was observed when the Epiphany SE was prepared with (1.37 ± 0.78) than without (0.92 ± 0.33) solvent. Adhesive failures were predominant in all groups. SEM analysis showed greater homogeneity of the filling mass when the solvent was added to the sealer. Treatment of root canal walls with 17% EDTA, and addition of a resinous solvent to Epiphany SE produced the highest adhesion to radicular dentin. Microsc. Res. Tech. 77:446–452, 2014. © 2014 Wiley Periodicals, Inc.     

Effect of final irrigation protocols on microhardness and erosion of root canal dentin

The aim of this study was to evaluate the effect of final irrigation protocols (17% EDTA, BioPure MTAD, SmearClear, and QMiX) on microhardness and erosion of root canal dentin. Fifty roots were sectioned transversely at the cement–enamel junction and each root was sectioned horizontally into 4‐mm‐thick slices. The samples were divided into five groups (n = 10) according to the final irrigation protocol: G1: distilled water (control group); G2: 17% EDTA; G3: BioPure MTAD; G4: SmearClear; and G5: QMiX. The dentin microhardness was then measured with a load of 25 g for 10 s. Initially, the reference microhardness values were obtained for the samples without any etching. The same samples were then submitted to the final irrigation protocols. A new measure was realized and the difference between before and after the procedures was the dentin microhardness reduction. In sequence, the specimens were submitted to SEM analysis to verify the dentinal erosion. The Kruskal Wallis and Dunn tests (α = 5%) were used to compare the results. The dentin microhardness decreased for all final irrigation protocols. There was no significant difference between groups 2, 3, 4, and 5 (P > 0.05), but this groups presented significant dentin microhardness reduction than G1 (P < 0.05). In G2, occurred the highest incidence of dentinal erosion (P < 0.05). 17% EDTA, BioPure MTAD, SmearClear, and QMiX promoted significant dentin microhardness reduction. Dentinal tubules erosion was promoted by 17% EDTA. Microsc. Res. Tech., 76:1079–1083, 2013. © 2013 Wiley Periodicals, Inc.