共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
钙离子光解释放与Fura荧光探针技术目前在生理学研究领域有着广泛的应用,目前国外已有能够检测活体细胞内钙离子浓度的装置和软件,但是全套实验配置价格昂贵,非常规实验室可接受,而国内这方面的研究开发又尚属空白。介绍了在自行研制的单色光源的基础上,基于VC++6.0开发的荧光测钙软件。根据生理实验的要求,设计实现了荧光测钙实验的各个功能模块,初步的实验结果表明:该软件具有功能清晰、人机界面友好,使用方便等特点,如若完善,有望将来取代国外同类产品,从而降低国内生理学研究的成本。 相似文献
3.
4.
5.
赵万军 《中国制造业信息化》2010,(6):31-33,38
采用VC++编程,开发了YJ32型三梁四柱式单缸液压机上横梁有限元分析交互式人机界面,实现了对ANSYS命令流的封装,研究了VC++前台调用ANSYS的方法。使用编制的VC++程序,能够根据输入的参数自动生成APDL宏文件,完成ANSYS的自动运行、分析计算和结果查看,为液压机上横梁系列产品的有限元分析提供了一种新的方法。 相似文献
6.
针对椭球曲面加工存在的问题,提出基于C++语言编程的等误差插补运算方法,通过控制误差提高椭球形曲面加工精度及效率。通过MVC400数控加工中心加工,椭球面精度能够满足精度要求,此方法也可以适用于较为复杂的非圆曲线的加工。 相似文献
7.
8.
9.
10.
11.
12.
介绍了基于VC++开发叉车总体设计CAD系统.为提高发动机选型的可视化程度、方便实时管理发动机数据信息,该系统构造了数据库操作类,通过调用类中函数,使用ADO接口技术访问Access. 相似文献
13.
为了保证皮带输送机的安全运行,发挥钢丝绳芯皮带在全生命周期中的最大效益,以TCK-GMS600弱磁检测器为基础,在VC++6.0集成开发环境下,应用DAQBench(Data Acquisition Bench)控件和多线程技术,开发了钢丝绳芯输送带电磁在线监测系统,实现了数据采集和存储、曲线实时显示、缺陷识别等功能,为钢丝绳芯皮带的健康维护奠定基础。 相似文献
14.
本文从理论上阐述了掺钛蓝宝石的激光特性并提出了谐振腔设计的优化方案。在室温条件下,实现了调Q倍频YAG激光泵浦下直腔式掺钛蓝宝石激光器的脉冲激光运转。波段范围为820nm~920nm。 相似文献
15.
设计了一种基于DSP处理器+CAN总线的塔式起重机防碰撞系统,该系统通过传感器对障碍物的静态和动态信息采集,经DSP处理器的AD接口可实现各子系统的运行状况并发出预警;通过利用CAN总线实现各塔式起重机之间与主控制系统和信息互换,有效的实现预防塔式起重机之间的碰撞。 相似文献
16.
17.
利用Surfer11提供的ActiveX接口,通过C#.net二次开发,实现浙江省范围内县、市及全省自动气象站数据的一些统计分析和绘图功能,达到各级气象部门在气象业务和科研工作中不定时、分区域、快速高效绘图的需求。同时,通过研究Surfer的白化文件规范,发现一种快速制作沿海多岛屿地区单一白化文件的方法,在白化效率和效果上与连贯地区相同,对沿海地区和非连贯地区的白化文件制作有一定的参考价值。对解决类似浙江省多海岛地区的Surfer绘图白化有较大的帮助。 相似文献
18.
Fuh-Der Chou 《The International Journal of Advanced Manufacturing Technology》2007,35(5-6):587-595
This research is motivated by the scheduling problem found in the burn-in operation of semiconductor final testing, where
jobs are associated with release times, processing times, and sizes. The burn-in ovens are modeled as batch-processing machines
which can process a batch of several jobs as long as the total sizes of the jobs do not exceed the machine capacity, and the
processing time of a batch is equal to the longest time among all the jobs in the batch. Moreover, this paper attempts to
schedule jobs on a single batch-processing machine to minimize makespan. A joint GA+DP algorithm is proposed involving two
stages: (1) the formation of job sequence by genetic algorithm operators, and (2) the formation of batches by a dynamic programming
algorithm. Computational experiments are given to examine the performance of the proposed algorithm. The experimental results
indicate that the joint GA+DP approach has well improved on all instances with respect to solution quality and runtime. 相似文献
19.
Ihn Nanigung Seung Ha Jeong Dae Hee Lee Taek Sang Choi 《Journal of Mechanical Science and Technology》2005,19(1):51-60
The KSNP+ RV closure head drop analysis was carried out to assess the reactor core coolability in case of the RV closure head drop
accident during the refueling operation. The analysis consists of a number of different RV head drop scenarios as the postulated
accident events during refueling that include a concentric head drop case and three different cases of laterally offset head
drop cases. The analysis was initiated due to the adoption of the IHA (Integrated Head Assembly) in the KSNP+ reactor design, which increases the weight of the RV closure head assembly. Four different analysis models were developed
that correspond to the RV head drop analysis scenarios. An in-house dynamic analysis code was used for the RV head drop analysis.
The entire reactor internals and fuel assemblies are modeled by using lumped masses and spring elements. Because of the extreme
load exerted by RV head drop, most members experience stresses that are beyond the elastic limits. A separate elastic—plastic
analysis for some members was carried out and the resulting load-deflection curve was used as the stiffness of the element.
The effect of water above the reactor vessel in the refueling pool was ignored for the conservative estimation of the analysis.
The analysis shows that the concentric head drop is the most severe case of loading condition. It also reveals that the local
deformation of some reactor internals and the fuel assemblies is occurred; however the primary membrane stresses are within
the bound of allowable stress limits. Consequently the reactor core remains in coolable state. 相似文献
20.
In this article the effects of different engineering parameters of rf-driven ion sources with an external spiral antenna and a quartz rf window are studied. This article consists of three main topics: the effect of source geometry on the operation gas pressure, the effect of source materials and magnetic confinement on extracted current density and ion species, and the effect of different antenna geometries on the extracted current density. The effect of source geometry was studied using three cylindrical plasma chambers with different inner diameters. The chamber materials were studied using two materials, aluminum (Al) and alumina (Al(2)O(3)). The removable 14 magnet multicusp confinement arrangement enabled us to compare the effects of the two wall materials with and without the magnetic confinement. The highest measured proton fractions were measured using Al(2)O(3) plasma chamber and no multicusp confinement. For the compared ion sources the source with multicusp confinement and Al(2)O(3) plasma chamber yields the highest current densities. Multicusp confinement increased the maximum extracted current by up to a factor of 2. Plasma production with different antenna geometries were also studied. The highest current density was achieved using 4.5 loop solenoid antenna with 6.0 cm diameter. A slightly lower current density with lower pressure was achieved using a tightly wound 3 loop spiral antenna with 3.3 cm inner diameter and 6 cm outer diameter. 相似文献