Mathematical modeling of falling liquid film evaporation process

A mathematical model of evaporation process from a laminar falling liquid film on a vertical plate of constant temperature is presented. The model is developed with and without interfacial shear stress due to the vapor flow at the liquid film surface. The vapor pressure drop, vapor exit velocity and cooling rate are calculated for different liquid mass flow values. It is shown that lower liquid mass flow produces higher cooling rate. The results also show that the interfacial shear stress has a considerable negative effect on the cooling rate. It is proved that there exists an optimum distance between the plates, which gives the maximum volumetric cooling rate.     

Fast and Compact 16 by 16 Cellular Neural Network Implementation

The paper presents a Cellular Neural Network implementation based on a high gain sigmoid operation. The required simplifications to the original theory are described that allow the use of high gain. With this design black and white images can be processed. The basic building blocks in a cell are described. A 16×16 cells network has been designed and processed with 1.2 micron CMOS technology. Measurement results which show the operation of the network are presented.     

A Micropower Interface ASIC for a Capacitive 3-Axis Micro-Accelerometer

In this paper, a micropower interface IC for a capacitive 3-axis micro-accelerometer implemented in a 0.13- BiCMOS process is presented. The sensor interface consists of a front-end that converts the acceleration signal to voltage, two algorithmic ADCs, two frequency references, and a voltage, current, and temperature reference circuit. Die area and power dissipation are reduced by using time-multiplexed sampling and varying duty cycles down to 0.3%. The chip with a 0.51 active area draws 62 from a 1.8 V supply while sampling temperature at 100 Hz, and four proof masses, each at 1.04 kHz. With a 4-g capacitive 3-axis accelerometer, the measured noise floors in the x-, y-, and z-directions are 482 , 639 , and 662 , respectively.     

A digital quadrature modulator with on-chip D/A converter

The first analog IF mixer stage of a transmitter can be replaced with this digital quadrature modulator. The modulator interpolates orthogonal input carriers by 16 and performs digital quadrature modulation at carrier frequencies f/sub s//4, -f/sub s//4,f/sub s//2 (f/sub s/ is the sampling frequency). A 12-b digital-to-analog (D/A) converter is integrated with the digital quadrature modulator. A segmented current source architecture is combined with a proper switching technique to reduce spurious components and to enhance dynamic performance. The digital quadrature modulator is designed to fulfill the spectral, phase, and EVM specifications of GSM, EDGE, and WCDMA base stations. The die area of the chip is 27.09 mm/sup 2/ (0.35-/spl mu/m CMOS technology) and the total power consumption is 1.02 W with 2.8 V at 500-MHz output sampling rate (0.78-W digital modulator, 0.24-W D/A converter).     

A single-chip multimode receiver for GSM900, DCS1800, PCS1900, and WCDMA

A single-chip, multimode receiver for GSM900, DCS1800, PCS1900, and UTRA/FDD WCDMA is introduced in this paper. The receiver operates at four different radio frequencies with two different baseband bandwidths. The presented chip uses a direct-conversion architecture and consists of a low-noise amplifier (LNA), downconversion mixers with on-chip local-oscillator I/Q generation, channel selection filters, and programmable gain amplifiers. In spite of four receive bands, only four on-chip inductors are used in the single-ended LNA. The repeatable receiver second-order input intercept point (IIP2) of over +42 dBm is achieved with mixer linearization circuitry together with a baseband circuitry having approximately +100-dBV out-of-band IIP2. The noise figure of the SiGe BiCMOS receiver is less than 4.8 dB in all GSM modes, and 3.5 dB in WCDMA. The power consumption from a 2.7-V supply in all GSM modes and in WCDMA mode is 42 and 50 mW, respectively. The silicon area is 9.8 mm/sup 2/ including the bonding pads.     

Heat and Mass Transfer Analogy Studies of Binary Liquid Mixture in Comparison with Eteanol-n-Heptane Evaporating to Air

An expenmental and theoretical study of heat and mass transfer analogy and a comparison of that to a binary liquid mixture evaporation is presented. Common organic solvents, ethanol and n-heptane, were used to form an alcohol - hydrocarbon mixture. Studies were carried out in a horizontal rectangular channel having air flow velocities of 0.2 - 0.9 m/s. Heat transfer coefficients were measured with a copper plate resistor and mass transfer coefficients with a square pool. The heat and mass transfer analogy is presented for a system having two evaporating compounds with a fixed value of air flow and verified by measuring and comparing mass transfer coefficients for distilled water with air flow velocities of 0.2 - 0.9 mls. An illustrative example of the use of the theory for industrial ventilation is presented.     

Numerical investigation of 3-D constraint effects on brittle fracture in SE(B) and C(T) specimens

Specimen size and geometry effects on cleavage fracture of ferritic steels tested in the ductile-to-brittle transition region remain an important technological impediment in industrial applications of fracture mechanics and in the on-going development of consensus fracture testing standards. This investigation employs 3-D nonllinear finite element analyses to conduct an extensive parametric evaluation of crack front stress triaxiality for deep notch SE(B) and C(T) specimens and shallow notch SE(B) specimens, with and without side grooves. Crack front conditions are characterized in terms of J-Q trajectories and the constraint model for cleavage fracture toughness proposed previously by Dodds and Anderson. An extension of the toughness scaling model suggested here combines a revised in-plane constraint correction with an explicit thickness correction derived from extreme value statistics. The 3-D analyses provide effective thicknesses for use in the statistical correction which reflect the interaction of material flow properties and specimen aspect ratios, a/W and W/B, on the varying levels of stress triaxiality over the crack front. The 3-D computational results imply that a significantly less strict size/deformation limit, relative to the limit indicated by previous plane-strain computations, is needed to maintain small-scale yielding conditions at fracture by a stress-controlled, cleavage mechanism in deep notch SE(B) and C(T) speciments. Moreover, the analyses indicate that side grooves (20 percent) should have essentially no net effect on measured toughness values of such specimens. Additional new results made available from the 3-D analyses also include revised -plastic factors for use in experimental studies to convert measured work quantities to thickness average and maximum (local) J-values over the crack front. To estimate CTOD values, new m-factors are included for use in the expression 131-1.     

Towards computer game studies

It is relatively stress-free to write about computer games as nothing too much has been said yet, and almost anything goes. The situation is pretty much the same when it comes to writing about games and gaming in general. The sad fact with alarming cumulative consequences is that they are under-theorized; there are Huizinga, Caillois and Ehrmann of course, and libraries full of board game studies,in addition to game theory and bits and pieces of philosophy – most notably those of Wittgenstein – but they won't get us very far with computer games. So if there already is or soon will be a legitimate field for computer game studies, this field is also very open to intrusions and colonisations from the already organized scholarly tribes. Resisting and beating them is the goal of our first survival game in this paper, as what these emerging studies need is independence, or at least relative independence.     

Temperature compensated logarithmic peak detector

A temperature compensated logarithmic amplifier for signal strength indicator or automatic gain control applications is presented. The logarithmic function is realized with a current-feedback operational amplifier with a nonlinear diode feedback. The designed BiCMOS current-feedback operational amplifier utilizes a novel circuit topology which makes possible constant 1 MHz bandwidth amplification with closed loop voltage gains up to 60 dB. The offset current of the current-feedback amplifier is cancelled with an active OTA-C feedback loop. The logarithmically amplified signal is further processed by a peak detector and a temperature compensation circuit. The temperature compensation principle is based on a division of two v _BE:s and it is realized with a current controlled variable current mirror. The logarithmic amplifier is fabricated with a 1.2 micron BiCMOS-process with NPN's f_T of 7 GHz. The power consumption of the circuit is 25 mW with a 4.5 V supply voltage.