Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

Effects of Oxygen Absorber and Temperature on ω3 Polyunsaturated Fatty Acids of Sardine Oil during Storage

To prevent loss of w3 polyunsaturated fatty acids over long-term preservation, the effects of temperature and oxygen absorber on the fatty acids of sardine oil stored in air-tight film were studied. The fatty acids of sardine oil and lipids in the diet of experimental animals rapidly decreased over 1 month at 22°C. The amounts in the diet decreased slowly at 2°C; however, no alterations in the oil samples were observed for 6 months. Also, the amounts did not change at -30°C. Significant changes in samples treated with oxygen absorber were not observed under all temperatures during 6 months storage (P > 0.05). These results indicate that treatment with an oxygen absorber and/or freezing can prevent ω3 polyunsaturated fatty acids of fish oil from decreasing during storage.     

AUTO CAD图形数据库剖析

本文对ＡＵＴＯ ＣＡＤ图形数据库进行了剖析，分析了系统的图形数据结构，阐述了图形数据库的查询，修改及其应用，以便进一步研究和开发ＡＵＴＯ ＣＡＤ图形系统。     

秦山核电厂安全壳对主蒸汽管道破裂事故的响应

一、概述核电厂安全壳是防止事故后放射性物质大量释放到坏境的最后一道屏障,是保护公众免受超剂量放射性照射的关键设施。人们对安全壳的重要性虽已认识有年,但得到明显事实验证的却是近年发生的美国三哩岛事故和苏联切尔诺贝利灾害性核事故。由表1可知,安全壳的有无对公众的影响是截然不同的。     

太阳能热管的研制和应用

介绍了太阳能热管发展的社会背景和历史沿革、太阳能热管单管的工质选择和管壳结构、热管式真空集热管的结构特点及太阳能热管在热水器中的应用     

原始组织及加热方式对Al-5.8wt%Cu合金熔化行为的影响

利用DSC分析手段，研究了具有3种不同凝固组织的Al-5.8wt%合金在7种不同加热方式下的熔化开始温度和熔化热，发现凝固组织中存在的非平衡共晶在加热过程中大部分扩散溶解，溶入基体，剩余部分参与共晶熔化，其熔化开始温度与组织状态无关，随加热速度的增大略有升高，溶解部分的体积分散与组织状态和加热方式有关，随加热时间和非平衡相表面积的增大而增大。     

Al-Si-Mg三元合金的溶质分凝及其对凝固过程的影响

从热力学角度分析了三元合金凝固过程中的溶质分凝行为, 利用耦合热力学计算技术研究了Al-Si-Mg三元合金溶质分凝因数在凝固过程中的变化规律, 获得了其与固相体积分数的定量关系, 进而预测了不同条件下Al-Si-Mg三元合金的凝固过程和相析出规律. 实验发现三元合金中溶质分凝因数在凝固过程变化巨大, 采用二元系中的参数使得对共晶种类和共晶分数的预测均与实验值有较大偏差. 采用耦合热力学计算技术, 获得了分凝因数在凝固过程中的变化规律, 使预测值更好地吻合于实验结果.     

冲压成形仿真过程中有限元网格模型的建立

网格模型对冲压成形模拟的精度和效率影响极大 ,文中阐述了有限元网格模型建立的方法 ,并从单元尺寸、单元类型、自适应网格再划分技术等方面论述了如何解决精度与效率的问题。     

硅铁复合型絮凝剂的实验研究

研究了硅铁复合型絮凝剂的制备方法和絮凝性能 ,确定了其最佳反应条件 ,所得复合型絮凝剂对江水的除浊性能优于聚合硫酸铁 (PFS)和聚合氯化铝 (PAC)。     

β-TCP的研究进展及其在骨科中的应用

β-磷酸三钙和羟基磷灰石作为最具代表的生物活性材料,在近代生物医学工程学学科领域一直受到人们的密切关注.综述了β-TCP及其复合材料的合成、应用以及发展.