Phytoplankton primary production, chlorophyll-a and nutrient concentrations in the water column of mountainous Lake Phewa, Nepal

The seasonal patterns of phytoplankton primary production, chlorophyll‐a concentration, cell number and several other limnological variables in Lake Phewa, located in the active monsoon zone in Central Himalaya, Nepal, were studied for a year beginning in April 2001. During the study period, the gross primary production and chlorophyll‐a concentrations were relatively low during the monsoon season. The phytoplankton cell number, represented by 24 genera, also fluctuated seasonally, but tended to increase in the pre‐ and post‐monsoon period. These results suggest that the monsoon plays a crucial role in the primary production and phytoplankton dynamics for Lake Phewa. Among the phytoplankton species, Microcystis aeruginosa, a representative species for eutrophic lakes, was the dominant phytoplankton. At the same time, however, it is clear that the lake is not yet heavily eutrophic. The present study suggests that the exchange of lake water during the monsoon season contributes to maintaining the health of the lake against further degradation. Nevertheless, the silt carried in the monsoon rain run‐off from the lake's catchment area suggests increasingly serious degradation problems for this small mountainous lake.     

Restoration of small lakes through cooperative management: A suitable strategy for poverty‐laden areas in developing countries?

Lake Rupa is a small, subtropical, shallow lake with a surface area of 100 ha situated 600 m a.s.l. in Central Himalaya, Nepal. This degraded lake was studied between 2000 and 2006, with the goal of determining whether or not it could be restored by a community‐based cooperative of local people living in its catchment. Main threats to the lake, its aquatic life and its very existence include encroachment by excessive aquatic vegetation, sedimentation, and low in‐lake concentrations of dissolved oxygen (DO). Small lakes (≤ 500 ha) are relatively prone to the process of ‘succession and climax’, although they also can be of social, environmental and ecological importance. Thus, their disappearance could spark social chaos and disorder in areas already having to cope with other rapid environmental changes. This means that credible mechanisms for revitalizing or protecting small lakes are an important goal. Accordingly, a lake cooperative of 329 households living in close vicinity to Lake Rupa was formed in 2002, by prioritizing traditional fishers, women and other deprived community members with the goals of respecting the citizenry and equity. Following the cooperative's campaigns directed at weed removal and fish stocking, encroachment of vegetation on the lake margins was halted, its aquatic weeds became under control, and its fisheries improved. In addition to the cooperative's restoration activities, several water quality parameters, including water transparency and DO and chlorophyll‐a concentrations, were monitored on a monthly basis. The measured water transparency was inconsistent, exhibiting large variations between 2000 and 2003. Relatively low, but consistent, values, however, were measured after 2004. The results imply that the removal of weeds, and sufficient nutrients and solar radiation are subsequently available to the lake's phytoplankton communities. Supporting this notion is that the chlorophyll‐a concentration spiked to 205 µg L⁻¹ in November 2006, the water transparency became consistent, and the DO concentration increased to >3.8 mg L⁻¹ during the critical months (March–May) after 2004. These water quality indicators indicated improvement in the degraded Lake Rupa, suggesting that the establishment of cooperatives such as that highlighted in this study could be a powerful and sustainable mechanism for restoring degraded lakes in similar socioeconomic settings by maintaining equity, by connecting communities with their resources, and by facilitating integrity, equity, citizenry and social justice.     

Conductometric Study of Some Metal Halides in Glycerol + Water Mixtures

Electrolytic conductivities of potassium halides, KX (X = Cl⁻, Br⁻, I⁻) have been investigated in 10, 20, and 30 mass% glycerol + H₂O mixtures at 298.0, 308.0, and 318.0 K. The conductance data have been analyzed by the Fuoss-conductance–concentration equation in terms of the limiting molar conductance (Λ⁰), the association constant (K _A ), and the distance of closest approach of ion (R). The association constant (K _A ) tends to increase in the order: 10 mass% < 20 mass% < 30 mass% glycerol + water mixtures, while it decreases with temperature. Thermodynamic parameters ΔH ⁰, ΔG ⁰, and ΔS ⁰ are obtained and discussed. Also, Walden products (Λ⁰η) are reported. The results have been interpreted in terms of ion–solvent interactions and structural changes in the mixed solvents.     

Investigating the Financial Implications and Viability of Diversified Water Supply Systems in an Urban Water Supply Zone

Water Resources Management - Diversified water supply schemes can reduce both peak demand and overall demand in the urban water supply network. Consequently, they provide benefits to both the water...     

Thermodynamic parameters of amitriptyline hydrochloride–additives at cloud point: effects of the ethanol–water mixed media

Abstract

Addition of organic solvents is known to change the properties of amphiphiles through modification of bulk phase. Amitriptyline hydrochloride (AMT) is a tricyclic amphiphilic drug which is usually used as an antidepressant. In drug delivery, the cloud point (CP) of the drug is an important parameter. This article discusses the effects of ethanol–water (EtOH–WR) compositions on the energetic parameters, such as changes in Gibbs energy of clouding (Δ_sG⁰), enthalpy of clouding (Δ_sH⁰), and entropy of clouding (TΔ_sS⁰) of AMT-additive systems. Monovalent alkali halide salts, cationic conventional surfactants, and gemini surfactants were used as additives in the EtOH–WR mixed media whose compositions were varied between 0 and 15% (w/w). The Δ_sG⁰ values are positive for all the additives and the values decrease with the rise in mole fractions of the additives. The Δ_sH⁰ and TΔ_sS⁰ were noted to be positive except for KF in 15% EtOH–WR mixed media.     

The potential of a renewable energy technology for rural electrification in Nepal: A case study from Tangting

Nepal, one of the least developed countries, is characterized by low per capita energy consumption and hugely dominated by traditional energy sources. Despite having enormous potential of hydro-electricity, only 50% of the total population has access to grid electricity. Firewood is the primary energy source for domestic purposes in rural environments. Due to geographical remoteness, a scattered consumer, higher costs of supply and maintenance, low consumption and low level of households’ income linking the rural areas to national electricity grid is difficult and implausible. In order to solve the energy problem in rural areas, Nepal’s government has initiated the production and distribution of several renewable energy technologies. Among several renewable technologies, micro-hydropower has been one of the most promising and widely adopted decentralized technologies to distribute electricity in rural areas. This article begins with a general overview of energy situation in Nepal. Present status and perspective of micro-hydro plants have also been discussed. Similarly, the dynamics of the relationship between electricity and socio-economic development has been analyzed by means of a typical rural electrification project in Tangting, Nepal by assessing the impacts of electricity on health, education, environment, and income in the village. The community has greatly benefitted from the arrival of environment friendly and affordable electricity. It has been concluded that the task of providing electricity to more remote and isolated villages is still challenging in Nepal. More systematic and comprehensive study supported by research and development is required to extend micro-hydro based electricity in more remote and poor communities of Nepal.     

Zipper: A compact connectivity data structure for triangle meshes

We propose Zipper, a compact representation of incidence and adjacency for manifold triangle meshes with fixed connectivity. Zipper uses on average only 6 bits per triangle, can be constructed in linear space and time, and supports all standard random-access and mesh traversal operators in constant time. Similarly to the previously proposed LR (Laced Ring) approach, the Zipper construction reorders vertices and triangles along a nearly Hamiltonian cycle called the ring. The 4.4× storage reduction of Zipper over LR results from three contributions. (1) For most triangles, Zipper stores a 2-bit delta (plus three additional bits) rather than a full 32-bit reference. (2) Zipper modifies the ring to reduce the number of exceptional triangles. (3) Zipper encodes the remaining exceptional triangles using 2.5× less storage. In spite of these large savings in storage, we show that Zipper offers comparable performance to LR and other data structures in mesh processing applications. Zipper may also serve as a compact indexed format for rendering meshes, and hence is valuable even in applications that do not require adjacency information.     

Comparative life cycle costs for new steel portal frame building systems

Life cycle costs of a new steel portal frame building system incorporating energy efficient sandwich panels are compared with those of a conventional steel portal frame building system for use in industrial and commercial buildings. The economic benefits of the new building system have been demonstrated through cost assessment of energy in use. The results from life cycle cost analysis of both the new and conventional portal frame building systems indicate that, despite slightly higher initial costs, the new building system costs significantly less than the conventional system over its complete life cycle of 50 years. The new system provides improved economic performance along with a more energy-efficient model for commercial/industrial building design in the Australian climate. Le coût du cycle de vie d'un nouveau système de bâtiment à portique en acier comportant des panneaux en sandwich efficaces au plan énergétique est comparé à un système classique pour un emploi dans des bâtiments industriels et commerciaux. Les avantages économiques du nouveau système ont été démontrés par une évaluation des dépenses énergétiques. Il ressort de l'analyse comparative du coût du cycle de vie du nouveau et de l'ancien système qu'en dépit d'une légère augmentation du coût de départ, le nouveau système est nettement moins onéreux que l'ancien sur un cycle de vie complet de 50 ans. Les performances économiques du nouveau système sont supérieures à celles du système classique, avec de meilleures performances énergétiques pour la conception de bâtiments commerciaux et industriels sous le climat australien.     

The effect of heat treatment temperature on the interfacial shear strength of C/C composites

This paper investigates the effect of heat treatment temperature on the interfacial shear strength (IFSS) of carbon/carbon composites reinforced with polyacrylonitrile-based fibers. A series of single fiber push-out tests were performed on specimens heat treated at 1800, 2100, and 2400 °C, using a nanoindenter with a flat ended conical tip. The microstructure was characterized using polarized light and transmission electron microscopy and the debonded fiber/matrix interface was examined using scanning electron microscopy. Wavelet analysis of the load–displacement data was used as an additional tool to investigate the initiation and progression of debonding. Compared to 1800 °C, heat treatment at 2400 °C was associated with a decrease in IFSS, from 12 to 7 MPa. Transmission electron microscopy study showed that the microstructure of the fiber/matrix interphase remained amorphous even with heat treatment at 2400 °C. The decrease in the IFSS can be partly attributed to the reorganization of the graphene sheets in the matrix in the vicinity of fiber/matrix interphase. The thermal expansion mismatch between fiber and pyrocarbon matrix is another possible reason for the observed decrease in the IFSS.     

Optimized tuning of power oscillation damping controllers using probabilistic approach to enhance small-signal stability considering stochastic time delay

Electrical Engineering - Communication latency which inherently occurs in wide area measurement system greatly degrades small-signal stability (SSS) and is stochastic in nature, and thus, the...