Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

层次式级联多网络模型及其性能

本文提出了一种层次式级联多网络结构，论述了其训练算法，并验证了该结构的收敛性。这种结构在处理高阶非线性分布数据的分类问题方面具有优良的性能，用北京谱仪事例过滤进行性能测试结果表明，其训练和泛化性能都优于单个ＢＰ网络。     

DD—921钢铁常温发黑剂的研制和应用

研究了钢铁常温发黑过程的成膜机理,各组分之间的作用以及相互之间的影响,着重分析了常温发黑的优缺点,工艺控制参数以及经济性。     

LD7铝合金时效工艺的研究

通过试验系统地研究了ＬＤ７铝合金的单级和两级时效工艺。结果表明，与传统的单级时效相比，两级时效在不降低室温强度，硬度的前提下，可显著提高合金的电导率及高温性能。     

A spectroscopic study of the self-association and inter-molecular aggregation behaviour of pH-responsive poly(l-lysine iso-phthalamide)

The pH mediated intra-molecular association and inter-molecular aggregation of a range of amphiphilic poly(l-lysine iso-phthalamide) polymers have been investigated in aqueous solution over a range of pH values and concentrations. The desired functionality of these novel bioresponsive amphiphilic polymers was achieved by incorporating pendant hydrophilic carboxyl groups along the polymer backbone, via the l-lysine moiety, balanced by a degree of hydrophobicity introduced via the iso-phthaloyl moiety. Incorporation of low levels of bis-functional Cy3 (poly-Cy3) and/or Cy5 dye (poly-Cy3/5 or poly-Cy5) co-monomers in the responsive polymer backbone allowed detailed probing of the pH mediated hydrophobic association using a combination of optical spectroscopic techniques. Both steady-state fluorescence spectroscopy and fluorescence lifetime measurements of poly-Cy3 revealed a conformational transition at pH 4.5. Thus, below a critical pH the polymer collapsed into a compact globular structure (hypercoil) bringing the fluorophore molecules into close proximity with one another. This resulted in a dramatic reduction in fluorescence intensity and fluorescent lifetime in the single fluorophore systems (poly-Cy3) accompanied by a red shift in the maximum emission wavelength. Observed redshifts in the emission maxima and enhancements of fluorescent lifetimes with increasing polymer concentration suggested the formation of polymer aggregates. Fluorescence resonance energy transfer (FRET) was measured in mixtures of single fluorophore containing poly-Cy3 (donor) and poly-Cy5 (acceptor) and dual fluorophore containing poly-Cy3 (donor)/Cy5 (acceptor) in an effort to distinguish between intra-molecular versus inter-molecular association. The relevance of the results with respect to potential in vivo applications (drug delivery and biodiagnostics) is discussed.     

热处理前后丙烯腈／溴乙烯共聚纤维的热性能和阻燃性能研究

分析了热处理前后丙烯腈／溴乙烯共聚纤维的热性能与溴乙烯含量、升温速率或热处理时间的关系，并对纤维的阻燃性与溴含量或热处理时间关系进行了研究。结果表明，溴含量的增加或热处理时间的延长对热稳定性和阻燃性的提高有较大影响，而且经热处理后纤维的阻燃性与溴无关。     

MACD与K线图技术在证券投机中的实证研究

利用MACD趋势指标与K线形态图进行相互验证技术,改进一般的基于MACD的证券买卖准则。实证结果表明,基于改进后的MACD买卖准则进行证券投机,几乎能使投机者捕捉到每一波段行情,从而获取较高收益。     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.     

网络设备配置信息备份系统的设计与实现

提出了如何设计开发网络设备配置信息备份系统,实现各种网络设备配置信息的远程备份,并用VBScript语言进行了具体实现。