高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: A synchrotron X-ray computed microtomography study

SiC_f/PyC/SiC and SiC_f/BN/SiC mini-composites comprising single tow SiC fibre-reinforced SiC with chemical vapor deposited PyC or BN interface layers are fabricated. The microstructure evolutions of the mini-composite samples as the oxidation temperature increases (oxidation at 1000, 1200, 1400, and 1600?°C in air for 2?h) are observed by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction characterization methods. The damage evolution for each component of the as-fabricated SiC_f/SiC composites (SiC fibre, PyC/BN interface, SiC matrix, and mesophase) is mapped as a three-dimensional (3D) image and quantified with X-ray computed tomography. The mechanical performance of the composites is investigated via tensile tests.The results reveal that tensile failure occurs after the delamination and fibre pull-out in the SiC_f/PyC/SiC composites due to the volatilization of the PyC interface at high temperatures in the air environment. Meanwhile, the gaps between the fibres and matrix lead to rapid oxidation and crack propagation from the SiC matrix to SiC fibre, resulting in the failure of the SiC_f/PyC/SiC composites as the oxidation temperature increases to 1600?°C. On the other hand, the oxidation products of B₂O₃ molten compounds (reacted from the BN interface) fill up the fracture, cracks, and voids in the SiC matrix, providing excellent strength retention at elevated oxidation temperatures. Moreover, under the protection of B₂O₃, the SiC_f/BN/SiC mini-composites show a nearly intact microstructure of the SiC fibre, a low void growth rate from the matrix to fibre, and inhibition of new void formation and the SiO₂ grain growth from room to high temperatures. This work provides guidance for predicting the service life of SiC_f/PyC/SiC and SiC_f/BN/SiC composite materials, and is fundamental for establishing multiscale damage models on a local scale.     

几何位相非线性变化的实验研究

本文报道了Pancharatnam位相非线性变化的实验研究，实验结果与理论预言符合得很好。Pancharatnam位相的这种非线性可能在光开关中得到应用。     

SIMATIC S5—115U可编程控制器

本文通过对SIMATIC S5—115U可编程控制器性能的简介,简述国外PC技术的现状和发展,并提出对PC国产化的看法.     

Flammability ranking of foliage species by factor analysis of physical and chemical pyric properties

In this paper, factor analysis is introduced to evaluate the flammability of 55 foliage species that may be used in China for construction of the fuel break network of forest strips with lower flammability. Six pyric parameters, i.e. air dry moisture content, absolute dry moisture content, ignition point, ash content, caloric value and extractive content, are measured and used as variables for factor analysis. The covariance analysis shows that four principal factors can be extracted to reflect the flammability in different physical and chemical senses. In terms of the contributions of the four factors to the variances and the physical significance of the relevant parameters, the four factors are, respectively, termed as ‘flaming factor,’ ‘air dry factor,’ ‘ash factor’ and ‘absolute dry factor.’ The stability of the factor analysis method is examined by a different number of samples considered, and the variation degrees of the orderings indicate that the method has high reliability to measure the total flammability of foliage species. The results of the flammability evaluation are verified by comparison with the recommended tree species in the Chinese technology standard. Copyright © 2008 John Wiley & Sons, Ltd.     

Metabolism and biochemical effects of 3,3',4,4'-tetrachlorobiphenyl in pregnant and fetal rats

The metabolism and distribution of a single oral dose of 25 mumol 14C-labelled 3,3',4,4'-tetrachlorobiphenyl (14C-TCB) were investigated in pregnant female Wistar rats and their fetuses. TCB was administered on day 13 of gestation and the elimination was followed for 7 days. Non-pregnant rats were treated similarly for comparison. Fecal elimination of 14C-TCB derived radioactivity was significantly lower in pregnant rats than in non-pregnant rats. The major metabolite found in adult liver and plasma, placental tissue, whole fetuses and fetal plasma was 3,3',4',5-tetrachloro-4-biphenylol (4-OH-TCB). Tissue levels (liver, abdominal fat, skin, skeletal muscle, kidney and plasma) of 14C-TCB-derived radioactivity declined by 65-85% over a 7-day period following administration in the adult animals. However, 14C-TCB-derived radioactivity accumulated more than 100-fold in the fetuses over the same time period, and GC/MS analysis revealed that the fetal accumulation in radioactivity was due primarily to 4-OH-TCB, and not the parent compound. On day 20 of gestation, concentrations of 4-OH-TCB were 14 times greater in fetal plasma than maternal plasma. Treatment with 14C-TCB significantly reduced plasma thyroxine levels by at least 28% up to 7 days after administration in non-pregnant animals and up to 4 days after administration in pregnant rats (31% decrease). By 7 days after administration plasma thyroxine levels had returned to control levels in the TCB-treated pregnant rats. However, fetal plasma thyroxine levels were significantly decreased by 35% in fetuses from 14C-TCB-treated dams 7 days after TCB administration. Hepatic microsomal ethoxyresorufin-O-deethylase (EROD) activity was significantly induced in TCB-treated dams relative to controls at 4 and 7 days after administration, while no EROD activity was detected in hepatic microsomes from control or TCB treated fetal rats at day 20 of gestation. These data suggest that hydroxylated metabolites of polychlorinated biphenyls may play a role in the development toxicity of these compounds.     

SURF1, encoding a factor involved in the biogenesis of cytochrome c oxidase, is mutated in Leigh syndrome

A drug with cationic characteristics such as procaine can be conveyed in a Carbomer hydrogel in two different ways: (i) in the form of salt in solution in the aqueous phase, and (ii) in the base form salified with the same polymer. Introduction of the drug into the hydrogel with different concentrations of polymer produced, in both cases, a reduction in viscosity in relation to drug concentration. The gels with procaine salified with the polymer showed greater viscosity. The drug release rate, in general, diminished with the increase in polymer concentration. Nevertheless, when this concentration was maintained, there was no variation in release rate when the viscosity produced as a consequence of drug concentration was changed. Gels with procaine salified with the carboxyvinylic polymer had a faster release rate than those with procaine in the hydrochloride form dissolved in the aqueous phase. These results have also been confirmed by a simulated absorption test.     

5G无人机全自主巡检系统在500 kV特大跨越上的应用

随着电力系统的不断发展,大数据、人工智能、通信网络技术、云计算等技术成为了建设智慧电网的强大后盾,同时无人机作为先进的巡检工具高效地解决了目前日益增长的输电线路运维需求.5G网络的不断普及带来的低时延、大带宽、海量连接的效果大幅提升了数据的传输效率.基于此,描述了5G技术与无人机全自主巡检系统在500 kV特大跨越输电线路上的优势与发展前景,立足实现智能巡检,提升巡检作业效率与准确性,以促进电力行业发展.     

湿法磷酸净化制三聚磷酸钠的探讨

阐述三聚磷酸钠产品的生产、消费和目前存在的问题,以及湿法磷酸净化制三聚磷酸钠的生产、建议和措施。     

Processing of a Silicon-Carbide-Whisker-Reinforced Glass-Ceramic Composite by Microwave Heating

A calcium magnesium aluminosilicate-based glass that contained 10 wt% of silicon carbide whiskers (SiC _w ) as reinforcement was prepared by tape casting, followed by sintering either in a conventional furnace or in a microwave oven. The results were consistent with retardation of glass sintering through whisker bridging. The glass, by itself, was sintered to almost-full density at 750°C for 4 h by conventional furnace sintering; the best sintered composite, with an estimated density of ∼90%, was obtained at 800°C with a dwell time of 4 h. Sintering at a temperature of >800°C did not improve the densification but rather resulted in severe whisker oxidation. A reduced densification rate was observed for the samples that were sintered in nitrogen. By contrast, in the microwave oven, almost-full density for the glass and ∼95% of the theoretical density for the composite were obtainable at 850°C for 15 min, which represented a reduction of ∼10 h of the total processing time and a reduced SiC _w oxidation.