宾馆酒店蒸汽冷凝水回收问题剖析

分析了宾馆酒店进行冷凝水回收所遇到的各种问题，提出了应对策略和解决方法，介绍了取得的应用效果。     

关于基站防雷接地的问题

着重讨论避雷针接受雷电流时的泻流方法和女儿墙上的避雷带的作用，以及如果用避雷带作为接地点，可能会带来的隐患。     

Cognitive engineering based knowledge representation in neural networks

A model of a human neural knowledge processing system is presented that suggests the following. First, an entity in the outside world lends to be locally encoded in neural networks so that the conceptual information structure is mirrored in its physical implementation. Second, the knowledge of problem solving is implemented in a quite implicit way in the internal structure of the neural network (a functional group of associated hidden neurons and their connections to entity neurons) not in individual neurons or connections. Third, the knowledge system is organized and implemented in a modular fashion in neural networks according to the local specialization of problem solving where a module of neural network implements an inter-related group of knowledge such as a schema, and different modules have similar processing mechanisms, but differ in their input and output patterns. A neural network module can be tuned just as a schema structure can be adapted for changing environments. Three experiments were conducted to try to validate the suggested cognitive engineering based knowledge structure in neural networks through computer simulation. The experiments, which were based on a task of modulo arithmetic, provided some insights into the plausibility of the suggested model of a neural knowledge processing system.     

机械式光开关市场定位及需求

简述了传统机械式光开关的现状 ,并从工作原理、结构及加工工艺等方面给出了其性能、零部件外型体积及光学指标 ;分析了传统机械式光开关的市场定位、市场需求以及它在当前光网络中的应用。     

Effect of the Liquid-Phase Characteristic on the Microstructures and Dielectric Properties of Donor- (Niobium) and Acceptor- (Magnesium) Doped Barium Titanate

Changes in the microstructure and dielectric properties with the variation of the donor/acceptor ratio in BaTiO₃ ceramics were investigated. In donor-rich specimens, a liquid that appeared during sintering did not penetrate into grain boundaries. However, in the acceptor-rich specimens, the grains were separated by a liquid film during sintering. The much higher mobility of the liquid film than that of the grain boundaries was suggested to cause extensive grain growth in acceptor-rich BaTiO₃. The macroscopic homogenization of dopants because of grain growth in acceptor-rich specimens resulted in changes in the dielectric properties.     

基于ZigBee的温室监测系统的低功耗设计

针对传统温室大棚有线监测系统存在施工复杂、线路多和维护难等缺陷,提出了一种基于ZigBee无线传感网络技术的低功耗温室监测系统的设计方案;通过对系统各部分的能耗进行分析,结合实际情况对传感器节点采用低功耗设计策略;硬件设计上采用低功耗射频芯片和智能开关芯片,软件编写上采用事件驱动方法延长节点休眠时间;该系统能够准确采集温室内光照度、空气温湿度、土壤水分和二氧化碳浓度等环境信息,并具有低功耗、低成本和易扩展等特点;测试结果验证了该方案的可行性。     

纳米MOFs及其衍生物在超级电容器中的研究进展

金属有机框架（MOFs）材料因其大的比表面积、可调控的孔道结构和丰富的活性位点引起了国内外学者们的广泛关注。近年来MOFs基材料广泛应用于能量储存与转化领域,但大多数MOFs基材料的低稳定性和低导电性等缺陷限制了其实际应用。通过对MOFs基材料进行改性,如采用共轭度高的有机配体以增加MOFs材料的稳定性,或MOFs衍生物以提高其氧化还原活性位点和导电性,从而达到提高MOFs基电极材料的电化学性能。主要介绍了原始MOFs及其衍生材料如碳材料、金属氧化物、金属硫化物、金属氢氧化物和金属磷化物等在超级电容器电极材料中的最新研究进展。研究表明,多金属MOFs材料或多金属MOFs衍生物有利于提高电极材料的电化学性能,而导电MOFs材料或MOFs衍生物中的碳材料有利于提高电极材料的导电性。最后对MOFs基电极材料在电化学储能领域中的研究做出了展望,指出MOFs基材料的形貌、组分和导电性是未来研究的发展方向。     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

优质饮用水直接进户试验研究

针对目前上海市自来水水质存在的不足,试验了三种水质深度处理工艺。试验证明,该三种工艺对浊度、色度、耗氧量、余氯、氨等指标均有明显的去除效果。在其它水质指标方面,符合建设部2002年“水质目标”及欧盟水质标准的要求,最后确定了一种工艺用于小区供水。     

软岩巷道破裂特征与分阶段分区域控制研究

解决软岩巷道维护问题的关键在于准确把握该类巷道围岩内部裂隙发展演化规律和破裂特征.以某矿典型的软岩巷道为研究对象,实验研究了巷道围岩组份及微结构的特征;现场测试了巷道围岩内部破裂发展过程和规律,得到了典型软岩巷道围岩内部裂隙扩展贯通具有阶段性和非均匀性的破裂特征;根据巷道破裂发展的时间效应和区域特征,提出了分阶段、分区域控制的关键技术,包括:分阶段喷射混凝土、锚杆(索)强力支护、围岩注浆加固的过程控制和重点部位的加强支护技术.现场工程实践表明,针对软岩巷道破裂特征的分阶段控制技术可以有效控制软岩巷道的围岩变形破裂的发展,实现该类巷道的围岩稳定.