Third order optical nonlinearities characteristics of Disperse Red1 organic dye molecules inside of polymeric nanocapsules

Measuring nonlinear optical response of a specific material in a mixture, not only leads to investigate the behavior of a particular component in various circumstances, but also can be a way to select suitable combination and optimum concentration of additives and therefore obtaining the maximum nonlinear optical signals. In this work, by using dual-arm Z-scan technique, the nonlinear refractive index of Disperse Red1 (DR1) organic dye molecules inside the core of prepared polymeric nanocapsules was measured among various materials which prepared nanocapsules were made of them. Then the measured value was compared with nonlinear refractive index of DR1 solved in dichloromethane.     

Heavy rare earths,permanent magnets,and renewable energies: An imminent crisis

This article sounds the alarm that a significant build-out of efficient lighting and renewable energy technologies may be endangered by shortages of rare earths and rare earth permanent magnets. At the moment, China is the predominant supplier of both and its recent rare earth industrial policies combined with its own growing demand for rare earths have caused widespread concern. To diversify supplies, new mining—outside of China—is needed. But what many observers of the “rare earth problem” overlook is that China also dominates in (1) the processing of rare earths, particularly the less abundant heavy rare earths, and (2) the supply chains for permanent magnets. Heavy rare earths and permanent magnets are critical for many renewable energy technologies, and it will require decades to develop new non-Chinese deposits, processing capacity, and supply chains. This article clarifies several misconceptions, evaluates frequently proposed solutions, and urges policy makers outside of China to undertake measures to avert a crisis, such as greater support for research and development and for the cultivation of intellectual capital.     

Bridging stresses in sintered reaction-bonded Si3N4 from COD measurements

Crack opening displacement measurements on a sintered reaction-bonded Si₃N₄ ceramic obtained in bending tests with edge-V-notched specimens were evaluated. A procedure is proposed which allows a straight-forward evaluation of the experimental results in order to obtain the bridging stresses as a function of crack opening displacements. Bridging stresses up to 160 MPa were found acting over a distance of about 0.4 μm. In addition crack profile measurements were performed for Vickers indentation cracks which could approximately be described by use of the bridging relation obtained.     

Comparison of three internationally certified firefighter protective ensembles: Physiological responses,mobility, and comfort

BackgroundFire protective ensembles (FPEs) are essential to safely perform firefighting job tasks; however, they are often burdensome to the workers. The aim of this study was to compare three internationally certified fire protective ensembles from the European Union (EU), South Korea (SK), and United States (US) on physiological responses, mobility, and comfort.MethodsTen male professional firefighters performed a battery of exercises in the laboratory following the ASTM F3031-17 standard to evaluate mobility, occupation-specific performance, and physiological responses (body weight, heart rate (HR), core temperature (T_c), breathing rate (BR), and rating of perceived exertion (RPE)) to 20 min of treadmill walking (3.2 mph, 5% incline). All participants carried out the evaluation wearing each FPE in a random order. Mixed effects models examined time (pre-vs. post-) by ensemble (EU, SK, US) interactions for all physiological variables and compared comfort, performance, and subjective variables across ensembles.ResultsNo interaction effects were observed for body weight, HR, T_c, BR, or RPE (p = 0.890, p = 0.994, p = 0.897, p = 0.435, and p = 0.221; respectively). SK had greater trunk flexion than EU (78.4° vs. 74.6°, p = 0.026) and US had lower standing reach than EU (105.5 cm vs. 115.4 cm, p = 0.004). Agility circuit time was lower in US (9.3 s) compared to EU (9.8 s) or SK (9.9 s) (p = 0.051 and p = 0.019, respectively).ConclusionsThe findings suggest that physiological burden remained largely unchanged across the international FPEs. However, mobility, performance, and comfort may be significantly influenced across types. International stakeholders and end users should consider design implications when choosing fire protective ensembles.     

Investigation of oil palm harvesting tools design and technique on work-related musculoskeletal disorders of the upper body

The oil palm industry is one of the important sectors in Malaysia. The growth and development of this industry shows that Malaysia is the world second-largest oil palm producers. However, in the fresh fruit bunch (FFB) harvesting process, the harvesters are exposed to many types of work-related musculoskeletal disorders (WMSDs). The FFB harvesters tend to develop WMSDs especially the shoulders and trunk. Hence, it is important to identify the exposure levels, awkward postures and the reaction forces of muscle activity based on the posture and movement of the harvesters when using pole, chisel and loading spike during the harvesting process. The objective of this study was to investigate the effect of the design of oil palm FFB harvesting tools on WMSDs of the upper body. Rapid Upper Limb Analysis (RULA) was used to investigate and assess the exposure level on the harvester body during the harvesting process. The assessment showed that the shoulders and trunk have high exposure level and undergo awkward posture. Human Musculoskeletal Model Analysis (HMMA) was used to identify the reaction force exerted on the muscle during the FFB harvesting process. In this study, 4 muscles were analysed including Triceps, Biceps, Erector Spinae and Psoas Major. The highest reaction force of 16.36 N was found on the left triceps when handling a loading spike. In conclusion, it is important to address the risks by reviewing all possible aspects that contribute to the WMSDs and interventions on the tool design, task and working shifts may be required.     

Preparation of micro-arc oxidation coatings on magnesium alloy and its thermal shock resistance property

1. Introduction Due to their high specific strength, good electro-magnetic shielding characteristics, high damping characteristics, good cast ability, and excellent pol-ishing capability, magnesium alloys are extensively used in aeronautical, automobile, and electro- communication industries [1-3]. But magnesium has some disadvantages, such as low chemical stability, high negative electric potential, and low hardness, so it is necessary to use surface disposal to accommo-date the demand for re…     

Stability of long trench in soft soils by bentonite-water slurry

A series of centrifuge model tests exploring the effects of different types of slurry on long-trench stability in soft clay were conducted. The influence of groundwater conditions relative to trench stability was examined by constructing long trenches using different slurries. The soil deformation and surface settlement induced by the excavation of the trench are found to be closely related to slurry type and excavation depth of the long trench. Increasing the bentonite concentration of the slurry has beneficial effects on stability： 1） larger particles can improve local and global stability in cases where filter cakes do not form, and 2） larger viscosity can promote filter cake formation on the walls of long trenches excavated in soft clay and enhance their stability.     

Single-mode fluorotellurite glass fiber

By multi-stage rod-in-tube fiber drawing process, a single-mode fluorotellurite glass fiber was fabricated and reported for the first time. Benefiting from chemical–physical dehydration process to remove water and OH⁻ groups, the propagation loss was decreased to 1.9 dB/m at 1550 nm and the infrared window is extended from 2.8 μm to 4.2 μm, i.e. a new kind of mid-infrared glass fiber. The fiber is with a small core of 3.52 μm in diameter to meet single-mode condition, and the effective nonlinear parameter γ was estimated to be 236.7 W⁻¹ km⁻¹ at 1550 nm by using continuous-wave self-phase modulation method. © 2015 Elsevier B.V. All rights reserved.     

Effect of pore structure on the compressive property of porous Ti produced by powder metallurgy technique

Porous Ti with an average macro-pore size of 200–400 μm and porosity in the range of 10–65% has been manufactured using polymethyl methacrylate (PMMA) powders as spacer particles. The compressive strength and elastic modulus of resultant porous Ti are observed in the range of 32–530 MPa and 0.7–23.3 GPa, respectively. With the increasing of the porosity and macro-pore size, the compressive strength and modulus decrease as described by Gibson–Ashby model. The failure due to cracking (complete fracture) of the struts on porous Ti is controlled primarily by macro-pores. Fractography shows evidence of the brittle cleavage fracture mainly, but containing a few fine shallow dimples and a small amount of transcrystalline fracture of similarly oriented laths. The failure mechanism has been discussed by taking the intrinsic microstructural features into consideration.     

Experimental study of the effect of conditioning on abrasive wear and torque requirement of full face tunneling machines

One of the main operational parameters in pressurized full face soft ground tunneling with machines such as earth pressure balance (EPB) TBMs is soil conditioning. Soil conditioners which are proper foam or conditioning agents, are often injected through the cutterhead or into the cutting chamber to make the muck flowable, lower inner friction between the soil particles, control soil stickiness, prepare the excavated soil to be compressible during the tunneling operation, control the water inflow, reduce the torque on the cutterhead, and lower power and torque of the screw conveyor. Foams can also be used in hard rock tunneling to reduce the wear and torque to replace conventional dust suppression by water sprays. This paper reviews the common practice in soil conditioning and focuses on assessing the influence of the conditioning on tool wear and torque requirement of the machines. Tests performed on many standard type soils and few samples from soft ground tunneling projects around the US on Penn State Soil Abrasion testing device. The results of tests performed in dry, moist and conditioned soil will be discussed and compared in this paper. The preliminary results show that the use of proper soil conditioning can reduce the wear of cutters and machine components by orders of magnitude while it can reduce the torque by over 50%.