Preparation,characterization and properties of polycaprolactone diol-functionalized multi-walled carbon nanotube/thermoplastic polyurethane composite

Multi-walled carbon nanotubes (MWCNTs) were chemically functionalized to prepare thermoplastic polyurethane (PU) composites with enhanced properties. In order to achieve a high compatibility of functionalized MWCNTs with the PU matrix, polycaprolactone diol (PCL), as one of PU’s monomers, was selectively grafted on the surface of MWCNTs (MWCNT–PCL), while carboxylic acid groups functionalized MWCNTs (MWCNT–COOH) and raw MWCNTs served as control. Both MWCNT–COOH and MWCNT–PCL improved the dispersion of MWCNTs in the PU matrix and interfacial bonding between them at 1 wt% loading fraction. The MWCNT–PCL/PU composite showed the greatest extent of improvement, where the tensile strength and modulus were 51.2% and 33.5% higher than those of pure PU respectively, without sacrificing the elongation at break. The considerable improvement in both mechanical properties and thermal stability of MWCNT–PCL/PU composite should result from the homogeneous dispersion of MWCNT–PCL in the PU matrix and strong interfacial bonding between them.     

Thermal stability of metal-doped diamond-like carbon fabricated by dual plasma deposition

Metal incorporation into amorphous diamond-like carbon films can provide superior properties as metal nano-clusters or nanocrystalline metallic carbides can be embedded in the carbon network. In this work, a filtered metal plasma cathodic arc technique is used to generate a metal plasma and acetylene is introduced to the metal plasma plume to deposit metal-containing DLC (Me-DLC) films and form nanocrystalline carbide phases in the amorphous carbon matrix. The films exhibit high thermal stability up to annealing temperatures of 500 °C as revealed by X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. At treatment temperature over 500 °C, a large amount of hydrogen is lost from the Me-DLC films as shown by elastic recoil detection. Breakdown and structural collapse of the film at high temperature can be attributed to the breaking of C–H bonds. Consequently, the C–C networks become more graphite-like to facilitate the formation of volatile C–O and metal oxides phases.     

Effect of diamond-like carbon (DLC) on the properties of the NiTi alloys

NiTi alloy has found wide application in the biomedical field due to its unique shape memory effect, superelasticity and biocompatibility. However, the materials are vulnerable to surface corrosion and the most serious issue is out-diffusion of toxic Ni ions from the substrate into body tissues and fluids. In this paper, NiTi alloys were coated with diamond-like carbon (DLC) fabricated by plasma immersion ion implantation and deposition (PIIID) to improve their corrosion resistance and blood compatibility without sacrificing their shape memory effect and superelasticity. The structure of the films and the depth profiles between the films and substrate were studied using Raman spectroscopy and XPS, respectively. The phase transformation temperature, superelasticity, anticorrosion behavior and Ni ions release of the coated and uncoated sample were investigated by DSC, tensile tests, potentiodynamic polarization and AAS, respectively. The hemocompatibilty of the coated and uncoated samples was measured using clotting time and platelet adhesion. The results shows that the films is DLC accompanying with the formation of the mixing layer, and the DLC films can markedly improve the corrosion resistance and the hemocompatibility, obviously increase the ratio of albumin-to-fibrinogen and effectively block the Ni ions release of the NiTi alloys without sacrificing its superelasticity and changing its phase transformation temperature. The research results suggest DLC films prepared by PIIID could improve the in vivo performance of NiTi alloys implanted into the human body.     

Effect of temperature and moisture on electrical conductivity in polyaniline/polyurethane (PANI/PU) blends

Miscible blend of conductive polyaniline/polyurethane (PANI/PU) showed preferable electrical property at low percolation threshold compared to immiscible blend of PANI/polystyrene-isoprene-copolymer (PANI/SIS) and carbon black/PU composite (CB/PU). The time dependence of the electrical conductivity was investigated with these samples aged under different humidity and temperatures. The electrical conductivity of PANI/PU (11.5/88.5, v/v) decreased with aging time and the morphology changed with time in the coexistence of high moisture and high temperature. After the aging treatment, the film of the miscible blend was re-dissolved and re-cast. The morphology and electrical conductivity were found to recover to the same state as the original film. In addition, the recovery mechanism of the morphology and the conductivity was also proposed here.     

A systematic investigation into a novel method for preparing carbon fibre–carbon nanotube hybrid structures

By electrospraying solvent dispersed carbon nanotubes (CNTs) with a binder onto carbon fibre (CF), hybrid structures, with an end aim to improve interfacial bonding in composites, were formed. The electrospray parameters controlling the modification of the CNT morphologies were studied. High-speed camera observations found applied voltage was critical for determining spray mode development. Electric field simulations revealed a concentrated electric field region around each fibre. Both voltage and distance played an important role in determining the CNT morphology by mediating anchoring strength and electric field force. The forming mechanism investigation of different surface morphologies suggested that binder with appropriate wetness gives freedom to the CNTs, allowing them to orientate radially from the CF surface. Linear density (LD) measurements and thermogravimetric analysis revealed that a 10 min coating increased the LD of a single CF filament by up to 31.7% while a 1 h treatment increased fibre bundle mass by 1%.     

Investigation of pitting corrosion monitoring using field signature method

The field signature method (FSM) is a nondestructive testing (NDT) method based on the potential drop (PD) technique and has been applied to online metal pipe corrosion monitoring for nearly three decades. The many advantages and benefits of the method have been reported in a number of studies, but few have reported on its limitations or shortcomings. However, the detection accuracy for pitting corrosion in FSM is very low. In this paper, the reasons for the low pitting corrosion detection accuracy of FSM were analyzed and it was found that different corrosion pits, which have different sizes, depths or positions, generally have differing influences on the potentials of nearby electrode pairs. Therefore, a new method using a subdivided resistor network to assess pitting corrosion is proposed and verified. When compared with the traditional method, the most important parameter, namely the pitting corrosion depth detection accuracy, can be significantly improved.     

Investigation of bacterial attachment and biofilm formation of two different Pseudoalteromonas species: Comparison of different methods

Biological fouling in marine environments creates numerous problems for engineered structures. Microbial attachment to a solid surface and biofilm formation initiates the process of biofouling. Therefore, detecting the initial bacterial attachment and understanding the mechanism of biofilm formation are important for controlling biofouling. In the present study, the mechanisms of bacterial attachment and biofilm formation of two marine isolated bacteria, namely Pseudoalteromonas sp. and Pseudoalteromonas flavipulchra on Ti-coated samples were examined through different electrochemical, surface analysis and thermodynamic methods. The results revealed that the rate of bacterial attachment and mechanism of biofilm formation varied for different species of bacteria. The amount of exopolysaccharide production could affect the bacterial attachment rate. Open circuit potentiometry has been found to be a valid and simple technique for continuous real-time monitoring of the biofilm formation compared to other electrochemical and thermodynamic techniques. Finally, two different models have been suggested to explain initial adhesion and biofilm formation of bacteria of different species.     

The effect of CuO coatings on the electrokinetic properties of stone wool fibres determined by streaming potential measurements

Commercial stone wool fibres were modified with copper(II) oxide coatings. This oxide is widely used in processes of surface modification for filter materials to improve its bacterial retention. The microorganisms are already susceptible to low concentrations of copper in contrast to humans for which copper is an inert material in the concentration range. Additionally, the coatings changed the electrokinetic properties of the fibres. As a result, the isoelectric point (IEP) of the untreated fibres was shifted from acidic towards a more basic pH range. A positive or no charge on the surface of the fibres allows them to be a substrate for the positively charged adsorbents of negatively charged waterborne contaminants with the use of electrostatic adsorption. The coatings were prepared by dip coating with the use of two different coating precursors: the aqueous suspension of CuO nanoparticles and aqueous solutions of copper(II) nitrate trihydrate or copper(II) acetate or a mixture of thereof. The zeta potential of the modified fibres was determined by a streaming potential method. The adhesion of the coatings was tested by flushing and ultrasonication of the modified fibres. The isoelectric point of the fibres was shifted towards a more basic pH range for all precursors with the largest impact of the copper(II) nitrate trihydrate precursor. This coating changed the IEP of the fibres from 4.1 to 8.3 pH value. The highest calculated coverage of the coatings was in the range of 54% and was obtained by using copper(II) nitrate trihydrate/CuO nanoparticles precursor. Although, we do not predict such modified fibres to act as a standalone water filter, we believe they have the potential to be an excellent support material for active adsorbents.     

自组织分层金属掺杂类金刚石薄膜的研究进展

近年来,研究学者发现在沉积过程中,某些金属元素掺杂类金刚石薄膜时能够形成一种特殊的自组织分层纳米结构,这种纳米结构克服了人为调控多层薄膜的工艺复杂性及局限性,同时赋予了薄膜更加优异的性能。主要综述了国内外对金属掺杂类金刚石薄膜中自组织分层结构的影响因素、形成机理等方面的研究现状。详细阐述了金属类型及含量、沉积条件(脉冲频率、基体偏压、气流比、沉积温度、沉积时间)、沉积方法等参数对自组织分层结构的生成及富金属层厚、富碳层厚、层数等尺寸的作用规律。重点介绍了离子重排机理、金属催化机理、强离子辐照诱导机理和靶中毒机理四种自组织分层结构形成机理的特点,并探讨了目前研究工作中存在的一些不足,如自组织分层结构的形成机理尚不清晰。上述四种机理模型均具有一定的局限性,且如何设计工艺参数实现自组织分层结构的内在调控仍是一个科学难点。针对这些问题,提出了自组织分层结构碳基薄膜的未来研究方向。     

Advanced deposition characteristics of kinetic sprayed bronze/diamond composite by tailoring feedstock properties

In this study, the effect of protective nickel film on diamond particles was studied with the goal of preventing fracture and obtaining a uniform diamond distribution in a bronze/diamond composite coating during kinetic spraying. Two types of bronze/diamond composite were deposited on aluminum substrate. For comparison with experimental results, the impact behavior between diamonds in the gas flow field was simulated by finite element analysis (using ABAQUS/Explicit 6.7-2). Size distribution and deposition efficiency of the diamond particles in the composite coatings were analyzed through scanning electron microscopy and image analysis methods. Diamond fracturing was avoided because the impact energy was mostly absorbed by the outer protective nickel film on the diamond particle during impact. The uniform distribution and deposition efficiency of diamond particles in the coating layer could also be achieved by tailoring the physical properties (density, size, etc.) of the feedstock.