Psychrophilic hydrogen production from petrochemical wastewater via anaerobic sequencing batch reactor: techno-economic assessment and kinetic modelling

Independent hydrogen production from petrochemical wastewater containing mono-ethylene glycol (MEG) via anaerobic sequencing batch reactor (ASBR) was extensively assessed under psychrophilic conditions (15–25 °C). A lab-scale ASBR was operated at pH of 5.50, and different organic loading rates (OLR) of 1.00, 1.67, 2.67, and 4.00 gCOD/L/d. The hydrogen yield (HY) progressed from 134.32 ± 10.79 to 189.09 ± 22.35 mL/gMEG_initial at increasing OLR from 1.00 to 4.00 gCOD/L/d. The maximum hydrogen content of 47.44 ± 3.60% was achieved at OLR of 4.0 gCOD/L/d, while methane content remained low (17.76 ± 1.27% at OLR of 1.0 gCOD/L/d). Kinetic studies using four different mathematical models were conducted to describe the ASBR performance. Furthermore, two batch-mode experiments were performed to optimize the nitrogen supplementation as a nutrient (C/N ratio), and assess the impact of salinity (as gNaCl/L) on hydrogen production. HY substantially dropped from 62.77 ± 4.09 to 6.02 ± 0.39 mL/gMEG_initial when C/N ratio was increased from 28.5 to 114.0. Besides, the results revealed that salinity up to 10.0 gNaCl/L has a relatively low inhibitory impact on hydrogen production. Eventually, the cost/benefit analysis showed that environmental and energy recovery revenues from ASBR were optimized at OLR of 4.0 gCOD/L/d (payback period of 7.13 yrs).     

Third order optical nonlinearities characteristics of Disperse Red1 organic dye molecules inside of polymeric nanocapsules

Measuring nonlinear optical response of a specific material in a mixture, not only leads to investigate the behavior of a particular component in various circumstances, but also can be a way to select suitable combination and optimum concentration of additives and therefore obtaining the maximum nonlinear optical signals. In this work, by using dual-arm Z-scan technique, the nonlinear refractive index of Disperse Red1 (DR1) organic dye molecules inside the core of prepared polymeric nanocapsules was measured among various materials which prepared nanocapsules were made of them. Then the measured value was compared with nonlinear refractive index of DR1 solved in dichloromethane.     

Cd-substituted Mg composites with dual-equivalent permeability and permittivity for high-frequency miniaturization antennas

Spinel Mg ferrites Mg_1-xCd_xCo_0.05Fe_1.95O₄ (x=0.0, 0.2, 0.3 and 0.4) as potential agents for the miniaturization of high frequency antennas are presented. All the synthesized compositions were experimentally revealed to possess pure spinel phase. Dual-equivalent permeability and permittivity (μ'≈26, ε'≈25, x=0.3 and μ'≈29, ε'≈28, x=0.4) from 5 to 100 MHz can be achieved by introducing Cd²⁺ ions, yielding large miniaturization factors of up to 25 and 28. To figure out the effects of Cd²⁺ ions substitution on magnetic and dielectric properties, the change in microstructure is mainly investigated. Meanwhile, enhanced magnetic properties including upward saturation magnetization (Ms) (approximately 47.60 emu/g) and reduced coercivity (approximately 54.22 Oe) are obtained due to increased grain size and denser microstructure arrangements reflected from scanning electron microscopy images. With low magnitude order of magnetic and dielectric losses factors (tanδ_ε reaches 10^-4, tanδ_μ reaches 10^-2), the composites can potentially exhibit high operating efficiencies at high frequencies.     

Bridging stresses in sintered reaction-bonded Si3N4 from COD measurements

Crack opening displacement measurements on a sintered reaction-bonded Si₃N₄ ceramic obtained in bending tests with edge-V-notched specimens were evaluated. A procedure is proposed which allows a straight-forward evaluation of the experimental results in order to obtain the bridging stresses as a function of crack opening displacements. Bridging stresses up to 160 MPa were found acting over a distance of about 0.4 μm. In addition crack profile measurements were performed for Vickers indentation cracks which could approximately be described by use of the bridging relation obtained.     

Comparison of three internationally certified firefighter protective ensembles: Physiological responses,mobility, and comfort

BackgroundFire protective ensembles (FPEs) are essential to safely perform firefighting job tasks; however, they are often burdensome to the workers. The aim of this study was to compare three internationally certified fire protective ensembles from the European Union (EU), South Korea (SK), and United States (US) on physiological responses, mobility, and comfort.MethodsTen male professional firefighters performed a battery of exercises in the laboratory following the ASTM F3031-17 standard to evaluate mobility, occupation-specific performance, and physiological responses (body weight, heart rate (HR), core temperature (T_c), breathing rate (BR), and rating of perceived exertion (RPE)) to 20 min of treadmill walking (3.2 mph, 5% incline). All participants carried out the evaluation wearing each FPE in a random order. Mixed effects models examined time (pre-vs. post-) by ensemble (EU, SK, US) interactions for all physiological variables and compared comfort, performance, and subjective variables across ensembles.ResultsNo interaction effects were observed for body weight, HR, T_c, BR, or RPE (p = 0.890, p = 0.994, p = 0.897, p = 0.435, and p = 0.221; respectively). SK had greater trunk flexion than EU (78.4° vs. 74.6°, p = 0.026) and US had lower standing reach than EU (105.5 cm vs. 115.4 cm, p = 0.004). Agility circuit time was lower in US (9.3 s) compared to EU (9.8 s) or SK (9.9 s) (p = 0.051 and p = 0.019, respectively).ConclusionsThe findings suggest that physiological burden remained largely unchanged across the international FPEs. However, mobility, performance, and comfort may be significantly influenced across types. International stakeholders and end users should consider design implications when choosing fire protective ensembles.     

Investigation of oil palm harvesting tools design and technique on work-related musculoskeletal disorders of the upper body

The oil palm industry is one of the important sectors in Malaysia. The growth and development of this industry shows that Malaysia is the world second-largest oil palm producers. However, in the fresh fruit bunch (FFB) harvesting process, the harvesters are exposed to many types of work-related musculoskeletal disorders (WMSDs). The FFB harvesters tend to develop WMSDs especially the shoulders and trunk. Hence, it is important to identify the exposure levels, awkward postures and the reaction forces of muscle activity based on the posture and movement of the harvesters when using pole, chisel and loading spike during the harvesting process. The objective of this study was to investigate the effect of the design of oil palm FFB harvesting tools on WMSDs of the upper body. Rapid Upper Limb Analysis (RULA) was used to investigate and assess the exposure level on the harvester body during the harvesting process. The assessment showed that the shoulders and trunk have high exposure level and undergo awkward posture. Human Musculoskeletal Model Analysis (HMMA) was used to identify the reaction force exerted on the muscle during the FFB harvesting process. In this study, 4 muscles were analysed including Triceps, Biceps, Erector Spinae and Psoas Major. The highest reaction force of 16.36 N was found on the left triceps when handling a loading spike. In conclusion, it is important to address the risks by reviewing all possible aspects that contribute to the WMSDs and interventions on the tool design, task and working shifts may be required.     

Pressureless sintering and tribological properties of WC–ZrO2 composites

In a recent work [Basu, B., Lee, J. H. and Kim, D. Y., Development of WC-ZrO₂ nanocomposites by spark plasma sintering. J. Am. Ceram. Soc. 2004 87(2), 317–319], the processing of ultrahard WC–ZrO₂ nanocomposites using spark plasma sintering is reported. In the present work, we investigate the processing and properties of WC–6 wt.% ZrO₂ composites, densified by pressureless sintering route. The densification of the WC–ZrO₂ composites was performed in the temperature range of 1500–1700 °C with varying time (1–3 h) in vacuum. The experimental results indicate that significantly high hardness of 22–23 GPa and moderate fracture toughness of ∼5 MPa m^1/2 can be obtained with 2 mol% Y–stabilized ZrO₂ sinter-additive, sintered at 1600 °C for 3 h. Furthermore, the friction and wear behavior of optimized WC–ZrO₂ composite is investigated on a fretting mode I wear tester. The tribological results reveal that a moderate coefficient of friction in the range from 0.15 to 0.5 can be achieved with the optimised composite. A transition in friction and wear with load is noted. The dominant mechanisms of material removal are tribochemical wear and spalling of tribolayer.     

Characteristics of coal sludge slurry prepared by a wet-grinding process

Coal sludge slurry(CSS) is an alternative fuel and a potential competitive method for sludge reduction.Based on the researches of coal water slurry, we studied CSSs by using a wet-grinding process with different types of regional municipal sludge(sludge) in an orthogonal experiment. The sludge type,sludge mixing proportion, dosage of dispersant, and grinding time were tested in this study. The results show that water content and its occurrence characteristics in the sludge have primary hindering influences on slurry ability. The range of fixed-viscosity concentrations with raw wet sludge is from 50.78%to 44.40%(by weight), while the range is from 53.35% to 51.51%(by weight) with dry sludge. All of the CSSs exhibit shear-thinning behaviors with different variation trends, especially the CSSs with more than 15%(by weight) raw wet sludge in it. Adding the same proportion of raw wet sludge increases the thixotropic properties of CSSs and the highest area of thixotropy loop is 3065 Pa/s, while the highest value of dry sludge is 1798 Pa/s. Hydrophilic group plays an important role in adsorbing water and building three-dimension networks with other particles, which is the main reason for CSS properties.Therefore, the mechanism can be used to find the way for making high quality CSS.     

日地系统多物理耦合机制的设计与实现

以日地系统活动规律研究为背景,通过对SCIRUN提出的PRMI进行4点改进,提出一种高效的日地系统多物理耦合交互机制PRMI++,能够在物理模型组件进行并行远程方法调用实现耦合交互的同时,自动实现网格重映射和数据并行分布重映射。实验结果证明PRMI++具有较好的性能。     

南岭于都—赣县矿集区的综合物性特征

针对南岭于都-赣县矿集区深部地球物理探测中综合物性研究工作的不足,对该区的综合物性进行了全面、系统地研究。本文首先提出了该区综合物性研究工作的技术路线,针对该区的岩（矿）石实际分布情况,采取了多种技术方法进行系统的标本采集,开展了多物性参数的测定;其次研究了该区各种岩（矿）石综合物性参数的分布特征及其变化规律,初步建立了矿集区地球物理标尺,为资料的处理解释提供物性依据;最后,根据综合物性研究成果对地球物理综合异常进行了解释和分析,取得了良好的地质效果。