Recent Advances in Conjugated Polymers for Visible-Light-Driven Water Splitting

With the ambition of solving the challenges of the shortage of fossil fuels and their associated environmental pollution, visible-light-driven splitting of water into hydrogen and oxygen using semiconductor photocatalysts has emerged as a promising technology to provide environmentally friendly energy vectors. Among the current library of developed photocatalysts, organic conjugated polymers present unique advantages of sufficient light-absorption efficiency, excellent stability, tunable electronic properties, and economic applicability. As a class of rising photocatalysts, organic conjugated polymers offer high flexibility in tuning the framework of the backbone and porosity to fulfill the requirements for photocatalytic applications. In the past decade, significant progress has been made in visible-light-driven water splitting employing organic conjugated polymers. The recent development of the structural design principles of organic conjugated polymers (including linear, crosslinked, and supramolecular self-assembled polymers) toward efficient photocatalytic hydrogen evolution, oxygen evolution, and overall water splitting is described, thus providing a comprehensive reference for the field. Finally, current challenges and perspectives are also discussed.     

Genetic diversity by AFLP analysis within Jatropha curcas L. populations in the State of São Paulo,Brazil

The genetic diversity of 5 populations of Jatropha curcas L. (Euphorbiaceae), a species cultivated in tropical countries and used in biodiesel production, was analyzed by amplified fragment length polymorphism (AFLP). Plants from distinct populations found in the State of São Paulo, Brazil, had their genetic diversity characterized by using three primer combinations. The number of polymorphic bands obtained reached 184 and the base pair length of bands ranged from 75 to 350, with average PIC values of 0.418. Accessions from the Aguas de Santa Barbara population presented the highest percentage of polymorphic loci (89.76%), followed by the populations of Catanduva (84.24%), Jales (80.98%), Jurucê (78.80%) and Taquaritinga (70.65%). Plants collected from the populations of Taquaritinga and Jales presented the smallest and highest genetic diversities, respectively, measured by using both Nei's genetic variability index (h = 0.2242 and 0.2973) and Shannon's index (I = 0.3359 and 0.4319). The results obtained indicated that 73.1% of genetic variability corresponds to intrapopulational variation and 26.8% to variation among populations. The clustering dendrogram using Jacquard showed four clusters. Three clusters with low genetic diversity grouped most of individuals collected in distinct regions (63.3% JU, 47.0% JA and 82.5% TA) and the fourth with the higher genetic diversity was composed with basically individuals collected in CA and AS, but it also had samples collected in JU, JA and TA, where it is possible to select individuals to be included in breeding programs.     

Effect of structure on the properties of polyurethanes based on aromatic cardanol-based polyols prepared by thiol-ene coupling

Industrial-grade cardanol and 2-mercaptoethanol were reacted to generate hydroxyl-functionalized cardanol by UV, free-radical-initiated thiol-ene coupling between the double bond moieties of the cardanol long carbon side chain and thiol functional groups. The average hydroxyl number of the hydroxyl-functionalized cardanol was controlled by reaction time, with the hydroxyl values of this ranging within 168–201 mg KOH g⁻¹. This cardanol was then used as a polyol to prepare cardanol-based polyurethane with hexamethylene diisocyanate and a NCO/OH ratio of 1. To compare the effect of cardanol-based polyols with the properties of cardanol-based polyurethane, cardanol modified with 10-undecylenate was used as a raw material to prepare cardanol-based polyols, including the long carbon chain of 10-undecylenate. All properties were examined, and data revealed that cardanol-based polyols including this long carbon chain can improve the hydrophobic and mechanic properties of the cardanol-based polyurethane.     

Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

Effect of sintering temperature on solidification and migration of non-volatile and volatile heavy metals in glass-ceramic

Using tailings as material to prepare glass-ceramic is an excellent way to achieve the resource utilization of solid waste. However, at present, researches on the solidification and migration of heavy metals are limited. Therefore, in this study, ten groups of samples were prepared by controlling sintering temperatures. The solidification, migration, and leaching behavior of non-volatile and volatile heavy metals were studied. The research showed that, with the increase of temperature, the properties of the samples were improved. Fe participated in the phase transformation and evolved into insoluble iron pyroxenes solid solution, while Pb was homogeneously distributed in the glass matrix of glass-ceramics. The leaching concentrations of Fe and Pb in the glass-ceramics were 0.055 mg/L ～0.087 mg/L and 0.074 mg/L ～0.140 mg/L, which were far below the threshold value. The results showed that heavy metals can be effectively solidified in glass-ceramics and have good environmental benefits.     

Maximum Data Generation Rate Routing Protocol Based on Data Flow Controlling Technology for Rechargeable Wireless Sensor Networks

For rechargeable wireless sensor networks, limited energy storage capacity, dynamic energy supply, low and dynamic duty cycles cause that it is unpractical to maintain a fixed routing path for packets delivery permanently from a source to destination in a distributed scenario. Therefore, before data delivery, a sensor has to update its waking schedule continuously and share them to its neighbors, which lead to high energy expenditure for reestablishing path links frequently and low efficiency of energy utilization for collecting packets. In this work, we propose the maximum data generation rate routing protocol based on data flow controlling technology. For a sensor, it does not share its waking schedule to its neighbors and cache any waking schedules of other sensors. Hence, the energy consumption for time synchronization, location information and waking schedule shared will be reduced significantly. The saving energy can be used for improving data collection rate. Simulation shows our scheme is efficient to improve packets generation rate in rechargeable wireless sensor networks.     

Assessment of spray quality from an external mix nozzle and its impact on SQL grinding performance

Spray quality is the critical factor which decides the efficacy of Small Quantity Lubrication (SQL) technology in a high specific energy involved machining process like grinding. Yet, the understanding about spray quality, the actual process mechanics and its effect on machining performance is inadequate. The present work is an attempt to establish a correlation between the spray input variables, quality of the spray and machining performance of SQL grinding through modelling and experiments. Using computational fluid dynamic techniques, the variation of droplet size, droplet velocity, number of droplets and heat transfer coefficient have been analysed at different input parameters and the computed trends have been verified and validated. CFD modelling of spray indicates that it is possible to produce aerosol medium with high heat dissipation ability at moderately high air pressure and low flow rate. It also shows that any increase in atomising air pressure favourably leads to notable increase in wetting area and also results in substantial enhancement in heat dissipation ability. Reduction of residual stress is thus remarkably good. On the other hand, grinding fluid flow rate, if increased, offers significantly better lubricity and reduces the grinding force which also reduces tensile residual stress. Short spell grinding test results are found to be in good agreement with CFD results.     

Bending effect of through-thickness reinforcement rods on mode II delamination toughness of ENF specimen: Elastic and rigid–perfectly plastic analyses

In this paper, a new simple metallic z-rod model is proposed to study the bending effect of the metallic z-rods on mode II delamination toughness of laminated composites. A new transverse shear force–deformation relationship for a metallic z-rod is obtained by using the classical beam theory and modeling its surrounding matrix as linearly elastic, rigid–perfectly plastic or linearly elastic–perfectly plastic springs. The bridging traction provided by a metallic z-rod to the mode II delamination toughness is assumed to be only the shear force carried by a z-rod created by the relative slippage between two substrate beams in an end-notched flexure (ENF) specimen, whereas the longitudinal sliding friction is assumed to make negligible contribution to the bridging traction. Mode II strain energy release rate (SERR) is employed to evaluate the influence of the metallic z-rods on the interlaminar fracture toughness of end-notched flexure (ENF) specimens. A parametric study of ENF specimens reinforced with the z-rods is conducted to demonstrate the effect of the new bridging mechanism by the metallic z-rods on the mode II delamination toughness.     

Observation and Analysis of Gypsum Particleboard using SEM

The microstructures of gypsum board and gypsum particleboard were observed by SEM. The effects of retarder and waterproof agent on the shape and the average dimension of the gypsum crystal were discussed. The mechanism was investigated as well. Four typical instances, i e, the gypsum crystal shape, the gypsum combined with particles on the particles surface, the gypsum combined with particles on the wood cross section and the gypsum combined with particles inside the wood cell cavity were selected and observed. Furthermore, the agglomeration and cementation mechanism between gypsum and particle were studied.