Sol–gel synthesis of Nd-doped BiFeO3 multiferroic and its characterization

Neodymium doped bismuth ferrite (BiFeO₃, BFO) nanoparticles were successfully synthesized by a facile sol–gel route. The influence of annealing temperature, time, Bi content and solvent on the crystal structure of BFO was studied. Results indicated that the optimum processing condition of BFO products was 550–600 °C/1.5 h with excess 3–6% Bi and ethylene glycol as solvent. On the other hand, Nd³⁺ ion was introduced into the BFO system and the effect of Nd³⁺ concentration on the structure, magnetic and dielectric properties of BFO were investigated. It was found that the magnetization of BFO was enhanced significantly with Nd³⁺ substitution, being attributed to the suppression of the spiral cycloidal magnetic structure led by the crystal structure transition. Furthermore, with increasing Nd³⁺ content, the dielectric constant was found to decrease while the dielectric loss was enhanced, which was mainly due to the hoping conduction mechanism with the reduction of oxygen vacancies.     

Research on the identification performance of UHF RFID system considering the correlation of cascaded channel

The identification rate of UHF RFID system was restricted by multipath propagation effects.The system identification performance was studied considering the correlation coefficient between forward and reverse channels.Based on the generalized Rician fading channel model,the analytical expression of identification rate was derived under independent,full correlation and correlation cases.Compared with the existing analysis,the proposed uniform calculation formula of identification rate was for any correlation coefficient and kinds of channel conditions.The numerical computation and Monte-carlo simulations show that the influences of different correlation coefficients,channel conditions,sensitivity and distance on the identification rate.     

Theoretical investigations on the spin Hamiltonian parameters for Er3+ ion in LiYF4

The spin Hamiltonian parameters g_∥, g_⊥, A_∥ and A_⊥ for Er³⁺ ion in LiYF₄ are investigated by using the perturbation formulas of these parameters for a 4f¹¹ ion in tetragonal symmetry. In these formulas, the contributions to the spin Hamiltonian parameters from the second-order perturbation terms and the admixtures of different states are considered. The relevant crystal field parameters are calculated from the superposition model and the local structural parameters of the Y³⁺ site occupied by impurity Er³⁺. The theoretical optical spectra within ⁴I_15/2 and ⁴I_13/2 states and the spin Hamiltonian parameters obtained in this work are consistent with the observed values.     

Sequential ion-electron irradiation of zirconium carbide ceramics: Microstructural analysis

Zirconium Carbide (ZrC_x) was irradiated with 10 MeV Au³⁺ ions to a dose of 10 displacements per atoms (dpa) and subsequently with 100 and 300 keV electrons in a transmission electron microscope (TEM). After ion irradiation, dislocation loops were observed in the microstructure and an increase in the number of carbon vacancies was revealed by Raman spectroscopy. Grazing incidence X-ray diffraction (GIXRD) analysis showed that neither amorphization nor oxidation occurred during ion irradiation of the specimen. Subsequent electron irradiation of the pre-implanted ZrC_x foil led to formation of nanosized tetragonal ZrO₂ precipitates (5−10 nm diameter) on the surface of the TEM lamella. The formation of the new oxide phase was not related to the electron beam-induced heating of the specimen, but to electron stimulated oxidation caused by the residual oxygen inside the transmission electron microscope. Changes in size and density of ZrO₂ crystallites were observed between the pristine and ion irradiated ZrC_x regions following electron irradiation, suggesting that the initial microstructure of the ZrC_x substrate played a key role in the nucleation and growth of the oxide islands. The obtained results provide insights into the microstructural response of ZrC_x to different types of radiation and the inadvertent effects of the electron beam during TEM analysis of in-situ and ex-situ ion irradiated ZrC_x. Additionally, the findings of this work suggest a method to prepare local ZrO₂ nanoprecipitates within ZrC_x grains by selective electron beam irradiation.     

Synthesis and characterization of LiNi0.95-xCoxAl0.05O2 for lithium-ion batteries

Samples of LiNi0.95-xCoxAl0.05O2 （x = 0.10 and 0.15） and LiNiO2, synthesized by the solid-state reaction at 725℃ for 24 h from LiOH-H2O, Ni2O3, Co2O3, and AI（OH）3 under an oxygen stream, were characterized by TG-DTA, XRD, SEM, and electrochemical tests. Simultaneous doping of cobalt and aluminum at the Ni-site in LiNiO2 was tried to improve the cathode performance for lithium-ion batteries. The results showed that co-doping （especially, 5 at.% A1 and 10 at.% Co） definitely had a large beneficial effect in increasing the capacity （186.2 mA.h/g of the first discharge capacity for LiNio.s.42OoaoAlo.0502） and cycling behavior （180.1 mA-h/g after 10 cycles for LiNio.85CooaoAlo.osO2） compared with 180.7 mA.h/g of the first discharge capacity and 157.7 mA.h/g of the tenth discharge capacity for LiNiO2, respectively. Differen- tial capacity versus voltage curves showed that the co-doped LiNio.95_xCoxmlo.osO2 had less intensity of the phase transitions than the pristine LiNiO2.     

Tailoring of Photoluminescence Properties in All-Vacuum Deposited Perovskite via Ruddlesden–Popper Faults

Ruddlesden–Popper (RP) faults are well known in oxide perovskites, and are also observed in promising metal halide perovskites. However, the effect of RP faults on optical properties of perovskite has not been systematically investigated. In this study, it is found that RP faults are common planar faults in all-vacuum deposited CsPbBr₃-based perovskite polycrystal thin films, and the density of RP planar faults can be greatly increased by non-stoichiometric composition (Cs-rich) as well as reduced dimensionality (quasi-2D) strategies. The photoluminescence (PL) measurement reveals monotonically increasing peak intensities with higher densities of RP planar faults from Cs-rich, quasi-2D to Cs-rich & quasi-2D samples. The corresponding atomic-scale differential phase contrast maps indicate strongly confined charges within the RP planar fault network, which explains well the relationship between PL enhancement and the density of RP planar faults, and offers an alternative pathway for tailoring the optoelectronic properties of perovskite.     

Breaking the Responsivity-Bandwidth Trade-Off Limit in GaN Photoelectrodes for High-Response and Fast-Speed Optical Communication Application

Underwater optical communication (UOC) has attracted considerable interest in the continuous expansion of human activities in marine/ocean environments. The water-durable and self-powered photoelectrodes that act as a battery-free light receiver in UOC are particularly crucial, as they may directly face complex underwater conditions. Emerging photoelectrochemical (PEC)-type photodetectors are appealing owing to their intrinsic aqueous operation characteristics with versatile tunability of photoresponses. Herein, a self-powered PEC photodetector employing n-type gallium nitride (GaN) nanowires as a photoelectrode, which is decorated with an iridium oxide (IrO_x) layer to optimize charge transfer dynamics at the GaN/electrolyte interface, is reported. Strikingly, the constructed n-GaN/IrO_x photoelectrode breaks the responsivity-bandwidth trade-off limit by simultaneously improving the response speed and responsivity, delivering an ultrafast response speed with response/recovery times of only 2 µs/4 µs while achieving a high responsivity of 110.1 mA W⁻¹. Importantly, the device exhibits a large bandwidth with 3 dB cutoff frequency exceeding 100 kHz in UOC tests, which is one of the highest values among self-powered photodetectors employed in optical communication system.     

Vacancy Manipulation Induced Optimal Carrier Concentration,Band Convergence and Low Lattice Thermal Conductivity in Nano-Crystalline SnTe Yielding Superior Thermoelectric Performance

Synergetic optimization of electrical and thermal transport properties is achieved for SnTe-based nano-crystalline materials. Gd doping is able to suppress the Sn vacancy, which is confirmed by positron annihilation measurements and corresponding theoretical calculations. Hence, the optimal hole carrier concentration is obtained, leading to the improvement of electrical transport performance and simultaneous decrease of electronic thermal conductivity. In addition, the incremental density of states effective mass m* in SnTe is realized by the promotion of the band convergence via Gd doping, which is further confirmed by the band structure calculation. Hence, the enhancement of the Seebeck coefficient is also achieved, leading to a high power factor of 2922 µW m⁻¹ K⁻² for Sn_0.96Gd_0.04Te at 900 K. Meanwhile, substantial suppression of the lattice thermal conductivity is observed in Gd-doped SnTe, which is originated from enhanced phonon scattering by multiple processes including mass and strain fluctuations due to the Gd doping, scattering of grain boundaries, nano-pores, and secondary phases induced by Gd doping. With the decreased phonon mean free path and reduced average phonon group velocity, a rather low lattice thermal conductivity is achieved. As a result, the synergetic optimization of the electric and thermal transport properties contributes to a rather high ZT value of ≈1.5 at 900 K, leading to the superior thermoelectric performance of SnTe-based nanoscale polycrystalline materials.     

Implementation and experimental performance evaluation of a hybrid interrupt-handling scheme

The performance of network hosts can be severely degraded when subjected to heavy traffic of today’s Gigabit networks. This degradation occurs as a result of the interrupt overhead associated with the high rate of packet arrivals. NAPI, a packet reception mechanism integrated into the latest version of Linux networking subsystem, was designed to improve Linux performance to suit today’s Gigabit traffic. NAPI is definitely a major step up from earlier reception mechanisms; however, NAPI has shortcomings and its performance can be further enhanced. A hybrid interrupt-handling scheme, which was recently proposed in Salah et al. [K. Salah, K. El-Badawi, F. Haidari, Performance Analysis and Comparison of Interrupt-Handling Schemes in Gigabit Networks, International Journal of Computer Communications, Elsevier, Amsterdam 30 (17) (2007) 3425–3441], can better improve the performance of Gigabit network hosts. The hybrid scheme switches between interrupt disabling–enabling (DE) and polling (NAPI). In this paper, we present and discuss major changes required to implement such a hybrid scheme in the latest version of Linux kernel 2.6.15. We prove experimentally that the hybrid scheme can significantly improve the performance of general-purpose network desktops or servers running network I/O-bound applications, when subjecting such network hosts to both light and heavy traffic load conditions. The performance is measured and analyzed in terms of throughput, packet loss, latency, and CPU availability.