A novel method of shrimp blanching by CO2 heat pump: Quality,energy, and economy analysis

To reduce the energy consumption of the shrimp blanching process and improve the economic value of the blanched product, a transcritical CO₂ heat pump blanching system (THPB system) was designed in this paper. The trends of astaxanthin were investigated at atmospheric pressure near boiling temperature, combined with the color and structural properties of shrimp samples, and the optimal blanching times of 270 s and 240 s were obtained at 90°C and 95°C, respectively. In contrast to the fuel blanching system (FB system) at 100°C, the annual standard coal consumption of the THPB system with 90°C blanching is decreased by 79%, and the annual operating cost can be saved by CNY 63,800, with a payback period of about 3.13 years.Industrial relevanceBlanching is one of the effective ways to prolong the shelf life of shrimp. However, the research on the blanching time and temperature of shrimp is not comprehensive. In addition, the traditional fuel blanching process has high energy consumption and pollution, and can no longer meet the quality requirements of the modern food processing industry. Heat pump has been shown to have better performance in food drying, but it is less used in blanching. The information presented in this study may provide other insights into food processing.     

Efficient hydrogen production for industry and electricity storage via high-temperature electrolysis

The paper describes the development status of Sunfire's reversible solid oxide cell (RSOC) technology. Here, Sunfire is a pioneer in the field of high-temperature electrolysers (HTE) for renewable hydrogen production which can be operated as a fuel cell for power generation in a reverse mode. The maturity of the technology is improved stepwise so that first applications in the field of hydrogen production for industry and electricity storage can be tackled. Three application examples where larger scale prototype has been installed will be discussed: 1) A power-to-power electricity storage based on hydrogen, 2) a RSOC unit that is installed in an iron and steel works, and 3) a pressurized SOEC prototype which will be integrated with a methanation unit. Results show the potentials of the technology in connection with fluctuating renewable energy sources.     

Membrane based detection of genetically modified organisms in some representatives food

Recently, DNA-based techniques became very common for the detection of genetically modified organisms (GMOs) in food products. For rapid and easy detection of GMOs, polymerase chain reaction (PCR) screening methods, which amplify common transgenic elements, are applied in routine analysis. Incorporation of PCR and membrane method introduced in this study offer an alternative detection of GMOs. In this study, a total of 32 samples and three certified reference materials were tested for the existence of the 35S promoter of cauliflower mosaic virus (CaMV) and 5-enol-pyruvyl-shikimate-3-phosphate synthase (EPSPS) gene residues. Dot blot screening system introduced in this study can be routinely used as a semi-quantitative screening of GMOs.     

Proteomic analysis of differentially expressed whey proteins in Saanen goat milk from different provinces in China using a data-independent acquisition technique

Whey proteins of Saanen goat milk samples from 3 provinces in China (Guangdong, GD; Inner Mongolia, IM; Shaanxi, SX) were characterized and compared using data-independent acquisition quantitative proteomics technique. A total of 550 proteins were quantified in all 3 samples. There were 44, 44, and 33 differentially expressed proteins (DEP) for GD versus IM, GD versus SX, and IM versus SX, respectively. Gene ontology annotation analysis showed that the largest number of DEP for the 3 comparisons were as follows: for biological processes: response to progesterone, glyceraldehyde-3-phosphate metabolic process, and negative regulation of megakaryocyte differentiation; for molecular functions: antioxidant activity, binding, and peroxiredoxin activity; and for cellular components: the same category of extracellular regions for the 3 comparisons, respectively. Pathways for the DEP of 3 comparisons were (1) disease; (2) synthesis and metabolism; and (3) synthesis, degradation, and metabolism. Protein–protein interaction network analysis showed that DEP for GD versus SX had the most interactions.     

Milk fat globule size,phospholipid contents and composition of milk from purebred and Alpine-crossbred Mid-Eastern goats under confinement or grazing condition

Milk fat globule (MFG) size and phospholipids (PL) content and composition were determined in milk collected at 65 (pretreatment), 110, 135 and 170 days of lactation from goats randomly assigned to grazing in Mediterranean brushland or fed clover hay indoors, in addition to concentrate. Daily feed intake and dietary contents of neutral detergent fibre and acid detergent fibre were higher in grazing goats, associated with milk richer in fat, with larger MFGs and 20% higher PL content. Smaller MFGs, produced by all confinement groups, was associated with 15 μg g⁻¹ fat higher milk PL content. The greatest effect was found in the Damascus goats, with over 44% higher PL concentration, on milk fat basis, in the confined compared with grazing group. Our understanding of how PL content is modulated by the interaction between genetic background and nutrition will enable to achieve either PL-rich milk or PL-enriched milk fat.     

β-Lactoglobulin nanofibrils: The long and the short of it

The bovine whey protein β-lactoglobulin will self-assemble into amyloid-like nanofibrils when heated at pH ≤ 3 and temperatures ≥75 °C. These fibrils have diameters <10 nm and lengths that can exceed 10 μm. The length and stiffness of fibrils depends on ionic strength; heating at low ionic strength produces long semi-flexible fibrils, whereas heating with added salts produces highly flexible ‘worm-like’ fibrils that are an order of magnitude shorter. Over the last two decades there has been a substantial research effort focused on imaging fibrils, manipulating conditions to accelerate fibril formation, and characterising microstructural and rheological properties of fibril dispersions. Here we review the major mechanistic findings, explore potential applications for fibrils as food ingredients, and highlight the major gaps in knowledge surrounding these intriguing self-assembled structures.     

婴儿配方粉中克雷伯氏菌的检出及污染情况

对婴儿配方粉中肠杆菌科细菌进行筛查,检出婴儿配方粉中污染了肺炎克雷伯氏菌和产酸克雷伯氏菌,检测样本241份,污染几率分别为5.0%和2.5%。所采用的检验方法为VRBGA结合MIAC进行分离,采用API20E和VITEC2进行生化鉴定。     

Dietary fibre fractions from fruit and vegetable processing waste

Until recently, dietary fibre and its components were regarded as balast substances from vegetal food. These days, they are given increasing attention because of the beneficial physiological effects they may exert on human and animal organisms. Dietary fibre includes a number of components, and each of them displays specific properties. The components of major importance are cellulose, hemicellulose, lignin and pectins. The objective of this study was to determine the amounts of particular dietary fibre fractions in samples containing apple, black currant, chokeberry, pear, cherry and carrot pomace. The results revealed the following pattern: in each pomace sample, pectins occurred in the smallest amounts, and the content of lignin was very high (black currant and cherry pomace) or comparatively high (pear, chokeberry, apple and carrot pomace). The other dietary fibre components were difficult to form into clearly defined groups. Their proportions varied from one pomace type to another.     

Aqueous and enzymatic extraction processes for the production of food-grade proteins and industrial oil from dehulled yellow mustard flour

Aqueous extraction is an emerging alternative to hexane-based oilseed extraction since it eliminates the dangers associated with processing, and allows the simultaneous recovery of high-quality protein products and vegetable oils. Five different successive non-enzymatic and enzymatic aqueous extraction processes (AEPs/EAEPs) were developed for dehulled yellow mustard flour with the aim of producing food-grade protein and yellow mustard oil for industrial applications. The oil released in these processes was tied up in oil-in-water emulsions that must be destabilized to recover free oil prior to industrial utilization. This study endeavored to ascertain the extraction parameters that increase oil and protein extraction yields and reduce emulsion stability during successive AEPs/EAEPs for dehulled yellow mustard flour. The remarkable stability of the emulsions was due to the presence of protein emulsifiers of high molecular weight along with the mixed phospholipid–oleosin layer. pH adjustment for emulsion destabilization was relatively inefficient; therefore, enzymatic demulsification treatments with different proteases and phospholipases were evaluated for their ability to release free oil by hydrolyzing the targeted emulsifiers. Although protease treatments with Protex 6 L at a concentration of 2.5 wt.% were effective in recovering over 91% of the oil in the emulsions, phospholipase treatments did not modify the free oil recovery from the emulsions. The results indicated that the enzymatic aqueous extraction of dehulled yellow mustard flour did not offer sufficient improvement in usable protein recovery to warrant the extra effort and cost.     

Relationships between sensory attributes and the volatile compounds,non-volatile and gross compositional constituents of six blue-type cheeses

Relationships between odour and flavour attributes of six blue-type cheeses and their volatile compounds, free amino acids (FAA), free fatty acids (FFA) and gross compositional constituents were determined. Relationships were also determined between texture attributes and gross compositional constituents. Fifteen assessors described the odour, flavour, appearance and texture profile of cheeses. Volatile compounds were isolated using a model-mouth apparatus. FAA, FFA and gross compositional constituents were determined using standard methods. Using Partial Least Squares Regression two odour and five flavour attributes were found to correlate with subsets of volatile compounds, FAA, FFA and gross compositional constituents. For example, “mouldy” flavour was positively correlated with the concentrations of pH 4.6-soluble nitrogen and 2-pentanone, 2-heptanone, 2-octanone and 2-nonanone. Three texture attributes were found to correlate with subsets of gross compositional constituents. For example, “crumbly” texture was positively correlated with concentration of fat and protein and negatively correlated with levels of moisture in the non-fat substance and moisture.