Copper–4,4′-dipyridyl coordination compound as solid reagent for spectrophotometric determination of reducing sugar employing a multicommutation approach

In this work a multicommuted flow system employing copper–4,4′- dipyridyl coordination compound as the solid-phase reagent for the spectrophotometric determination of reducing sugar was developed. The coordination compound was synthesized through a reaction of the 4,4′-dipyridyl and copper (II) nitrate, under hydrothermal conditions. The complex was characterized by infrared spectroscopy (FTIR), power X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analysis (TGA). Based on the characterization, a multicommuted spectrophotometric procedure for the determination of reducing sugar using copper (II) complex as solid reagent is proposed. The proposed method was based on the redox reaction between a monosaccharide, such as fructose and glucose (reducing sugar) and Cu(II). This reaction, mediated in an alkaline medium, produces a yellow compound that can be determined by absorption electronic spectroscopy (λ_ABS = 420 nm). Under optimum experimental conditions, a linear response ranging from 1.0 to 20.0 g L⁻¹ (R = 0.9978 and n = 5), a detection (3σ criterion) and quantification (10σ criterion) limit estimated at 0.23 and 0.75 g L⁻¹, respectively, a standard deviation relative of 4.7% (n = 7), for a reference solution of 10.0 g L⁻¹ reducing sugar, and a sampling rate of 75 determinations per hour were achieved. The proposed system was applied to the determination of reducing sugars in coconut water and juices. The analysis of ten samples and the application of the t-test to the results found, and those obtained using reference procedures (AOAC), provided no significant differences at a 95% confidence level. This system enabled the analysis of reducing sugar with ease and simplicity, providing a significant economy of the solid reagent (600 μg per determination) and reducing effluent generation.     

Detection of acylated homoserine lactones in gram-negative proteolytic psychrotrophic bacteria isolated from cooled raw milk

Through a mechanism called quorum sensing, bacteria are able to express specific genes in response to population density. Cell-to-cell communication in bacteria is mediated by signal molecules such as acylated homoserine lactones (AHLs). This work aimed to detect AHL production in Gram-negative psychrotrophic bacteria isolated from raw milk. A total of 84.9% of the bacteria were identified as AHL producers eliciting a diversity of responses in the AHL-monitor systems. These results demonstrate that AHL-production is common among psychrotrophic bacteria isolated from milk, and indicate that quorum sensing may play an important role in the spoilage of this product.     

Gurum Seeds: A Potential Source of Edible Oil

Cucurbitaceae family seeds are mostly discarded as agro-industrial wastes. Gurum (Citrullus lanatus var. colocynthoide) is an underutilized wild cucurbit plant, closely related to desert watermelon, which is grown abundantly in some African countries. Gurum seeds can play a significant role in health and nutrition due to their high oil content. This review describes the nutritional composition of gurum seeds and their oil profile. Gurum seeds are a good source of oil (27–35.5%), fiber (26–31%), crude protein (15–18%), and carbohydrates (14–17%). Gurum seeds oil is extracted by supercritical CO₂ (SFE), screw press, and solvent extraction techniques. The gurum seeds oil is composed of unsaturated fatty acids with a high proportion of linoleic acid (C18:2) and oleic acid (C18:1). Gurum seeds oil contains various bioactive compounds, such as tocopherols, phytosterols, and polyphenols. It is reported that solvent extraction gives a higher yield than the screw press and SFE, but the SFE is preferred due to safety issues. More studies are required for producing better quality gurum seeds oil by using novel extraction techniques that can increase oil yield.     

A QM/MM study of the catalytic mechanism of aspartate ammonia lyase

Aspartate ammonia lyase (Asp) is one of three types of ammonia lyases specific for aspartate or its derivatives as substrates, which catalyzes the reversible reaction of l-aspartate to yield fumarate and ammonia. In this paper, the catalytic mechanism of Asp has been studied by using combined quantum-mechanical/molecular-mechanical (QM/MM) approach. The calculation results indicate that the overall reaction only contains two elementary steps. The first step is the abstraction of C_β proton of l-aspartate by Ser318, which is calculated to be rate limiting. The second step is the cleavage of C_αN bond of l-aspartate to form fumarate and ammonia. Ser318 functions as the catalytic base, whereas His188 is a dispensable residue, but its protonation state can influence the active site structure and the existing form of leaving amino group, thereby influences the activity of the enzyme, which can well explain the pH dependence of enzymatic activity. Mutation of His188 to Ala only changes the active site structure and slightly elongates the distance of C_β proton of substrate with Ser318, causing the enzyme to remain significant but reduced activity.     

Effect of particle size on quality of crab meatballs using enzymatically deproteinized crab by-products

The production of crab meatballs generates large amount of crab shell waste, it is therefore necessary to develop a green, economical and environmentally friendly process to vaporize the waste. This study was aimed at investigating the applicability of microwave heating combined with ultrasonic field-assisted alkaline protease (MUSED) (50 ℃, pH = 9.0, 14025.67 U/g, 4.21 h and liquid/material = 14.41:1) for pretreatment of ball-milled crab shells. The ball milling efficiency of the crab shell powder pretreated by MUSED was observed to increase by 50 % compared to the control group, with the final average particle size of D₄ = 4.88 ± 0.20 um. High calcium solubility and low energy consumption of the ball-milled powder increased dietary calcium bioavailability and reduced the potential for high calorie intake. The addition of 6 % (w/w) crab shell powder treated by MUSED improved the texture of the crab meatballs (CM-D₄) and gave the product enhanced crab flavor relative to the control group. Moreover, the lower cooking loss of CM-D₄ resulted in significant retention of nutrients (p < 0.05). The crab shell powder treated by MUSED method was more efficient in ball milling, which improved the quality of crab meatballs while relieving environmental pressure.     

β-Casein will chaperone β-lactoglobulin during nanofibril assembly,but prefers familiar company at high concentrations

Bovine β-casein behaves as a chaperone at neutral pH, i.e., it inhibits aggregation of unfolded proteins, but chaperone effects have not been investigated at acidic pH. We examined chaperone effects during heating at pH 2 and 80 °C for mixtures of 1% (w/v) β-lactoglobulin (β-Lg) and β-Lg:β-casein molar ratios of 1:0.0625 to 1:1. These conditions hydrolyse β-Lg into peptides that self-assemble into amyloid-like nanofibrils. Hydrolysis rates in mixed solutions were unchanged from single-protein controls, according to sodium dodecyl sulphate polyacrylamide gel electrophoresis. At ratios ≥1:0.125, β-casein slowed fibril growth in a concentration-independent way, according to Thioflavin T fluorescence. We observed twisted irregular fibrils coexisting with long semiflexible fibrils when β-casein was heated with β-Lg, using transmission electron microscopy. We hypothesise that β-casein monomers and peptides can interact with growing β-Lg nanofibrils or assemble into micelles, with the latter pathway predominating at high β-casein concentrations.     

Process parameters design of a three-dimensional and five-directional braided composite joint based on finite element analysis

This paper presents an analytical method for designing the configuration of composite joint with three-dimensional (3D) five-directional braided composites. Based on the analysis of 3D braided structure characteristics, the elastic properties of the 3D five-directional braided composites were determined by the volume averaging method. The effects of the braiding angle and fiber volume fraction on the elastic constants of the braided composites were also discussed. Finite element analysis on the load capacity of the 3D five-directional braided composite joint was implemented using the software ANSYS Workbench 14.0. The influence of braiding angle on the stress, strain and deformation of the composite joint under tensile loading were calculated. The results show that when the fiber volume fraction of the 3D five-directional braided preform is given, the equivalent stress of the composite joint decreases monotonically as the braiding angle increases, while the normal stress, maximum principal stress and total deformation firstly decreases and then increases. Based on the finite element analysis, we found that at the fiber volume fraction of 60%, the braiding angle within the range of 30–35° are the optimum processing parameters for the 3D five-directional braided composite joint structure that used in the tensile load 320 N condition.     

Screening of adhesive lactobacilli with antagonistic activity against Campylobacter jejuni

In the present study, 78 lactic acid bacteria (LAB) strains were screened for the antagonistic activity against Campylobacter jejuni and 15 LAB strains with high bactericidal capacity were selected for further study through the analysis of the inhibition zone of LAB spent culture supernatant on the growth of C. jejuni. Among these strains, four isolates, Lactobacillus plantarum N8, N9, ZL5 and Lactobacillus casei ZL4 exhibited high adhesion ability to HT-29 cells. All the cell free supernatant (CFS) of these four strains contained high concentration of organic acid and their inhibition effects against C. jejuni were pH sensitive. Furthermore, these four strains could strongly antagonize the adhesion and invasion of C. jejuni to HT-29 cells and showed good tolerance to artificial gastric and small intestinal juices. This study suggests that Lactobacillus strains N8, N9, ZL4 and ZL5 could be used as potential probiotics in food applications against C. jejuni infection.     

Synergetic effects of high-pressure carbon dioxide and nisin on the inactivation of Escherichia coli and Staphylococcus aureus

Synergetic effects of high-pressure carbon dioxide (HPCD) and nisin on Escherichia coli and Staphylococcus aureus were evaluated. Changes in morphology, interior structure, and membrane permeability were analyzed by scanning and transmission electron microscopy, and flow cytometry. Synergetic effects were found, especially in S. aureus. HPCD alone or with nisin led to morphological and intracellular alterations in both bacteria, but nisin alone led to these damages only in S. aureus. A positive correlation between membrane damage and inactivation was found, but ratios of inactivation were higher, probably because of viable but non-culturable state. Mechanisms were proposed for synergism: for E. coli, outer membrane was damaged first by HPCD, and then HPCD and nisin jointly acted on and destroyed the cytoplasmic membrane, leading to further intracellular damage by HPCD; for S. aureus, HPCD and nisin acted on the cytoplasmic membrane together leading to cell death.Industrial RelevanceEscherichia coli and Staphylococcus aureus are two common microorganisms, which exist widely in the environment and easily contaminate food such as vegetables and dairy products, respectively. Considering heat treatment may destroy some heat-sensitive quality of the products, this study evaluated synergetic effects of high-pressure carbon dioxide (HPCD) combined with the bacteriocin nisin. The investigations provided evidence for potentially combined application of HPCD and nisin to help keep food safe in the industry.