Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

Effects of different carbon sources and C/N values on nonvolatile taste components of Pleurotus eryngii

Pleurotus eryngii, the second largest industrial cultivation mushroom in China, is usually cultivated on substrates mainly consisting of sawdust and corncob. In this study, experiments were performed to determine the effects of different carbon sources and C/N values on nonvolatile taste components of P. eryngii. The effects of different carbon sources on nonvolatile taste components levels revealed that sawdust was beneficial to high levels of crude protein, amino acids, 5′‐nucleotides and equivalent umami concentration, while corncob was beneficial to high contents of carbohydrate, polysaccharides and trehalose. At the similar C/N values, relatively higher sawdust content was beneficial to umami amino acid production, while relatively higher corncob content was beneficial to high contents of carbohydrate, polysaccharides and mannitol. Higher C/N value was beneficial to high levels of crude protein, amino acids, 5′‐nucleotides and equivalent umami concentration, while lower C/N value was beneficial to high contents of carbohydrate, polysaccharides and trehalose. These results provided information for P. eryngii fruit body industrial cultivation to obtain specific nonvolatile taste components with high levels.     

Iron-binding peptides from whey protein hydrolysates: Evaluation,isolation and sequencing by LC–MS/MS

Iron–peptide complexes have been considered a promising source of more bioavailable iron, with reduced side effects as compared to iron salts. Whey protein isolate (WPI) hydrolyzed by alcalase, pancreatin or flavourzyme was ultrafiltered (cut off 5 kDa) and their fractions – retentates and filtrates – were evaluated for iron-binding capacity. The Fe–hydrolysate complexation reaction resulted in a dramatic increase in iron solubility at pH 7.0, from 0% to almost 100%. This result was obtained regardless of the molecular mass profile or the enzyme used to obtain the samples. Fractions from hydrolysate obtained with pancreatin (HP) were chosen to continue the study. The complexes formed with both fractions from HP were stable under simulated gastric digestion (50.8–89.4%). To identify the peptides with iron-binding capacity, the HP fractions were isolated by IMAC-Fe^3 +, and the retentate showed higher relative concentrations of iron-binding peptides than the filtrate. Iron-binding peptide sequencing, accomplished by LC–MS/MS, showed Glu and/or Asp in all the sequences, and their carboxylic groups were amongst the main iron-binding sites. WPI hydrolysis with pancreatin yields peptides that can form iron complexes with the potential to increase iron bioavailability and reduce its pro-oxidant effect.     

Efficient synthesis of benzophenone derivatives in Lewis acid ionic liquids

Benzophenone and its derivatives were prepared via Friedel–Crafts acylation reactions using ionic liquids (ILs) of BmimCl–FeCl₃, BmimCl–AlCl₃ and BmimCl–ZnCl₂ as dual catalyst–solvent. Among them, BmimCl–FeCl₃ showed much higher catalytic activity than that observed for the other two ILs, and in conventional organic solvents. In these reaction systems, good to excellent yields (up to 97%) of acylation products were obtained in a short reaction time. This method features high yield, a simple product isolation procedure, ILs reusability and reduced waste discharge, thus rendering this catalytic system both efficient and environmentally friendly.     

A comprehensive approach to evaluating watershed models for predicting river flow regimes critical to downstream ecosystem services

Selection of strategies that help reduce riverine inputs requires numerical models that accurately quantify hydrologic processes. While numerous models exist, information on how to evaluate and select the most robust models is limited. Toward this end, we developed a comprehensive approach that helps evaluate watershed models in their ability to simulate flow regimes critical to downstream ecosystem services. We demonstrated the method using the Soil and Water Assessment Tool (SWAT), the Hydrological Simulation Program–FORTRAN (HSPF) model, and Distributed Large Basin Runoff Model (DLBRM) applied to the Maumee River Basin (USA). The approach helped in identifying that each model simulated flows within acceptable ranges. However, each was limited in its ability to simulate flows triggered by extreme weather events, owing to algorithms not being optimized for such events and mismatched physiographic watershed conditions. Ultimately, we found HSPF to best predict river flow, whereas SWAT offered the most flexibility for evaluating agricultural management practices.     

Synthesis and swelling properties of poly[acrylamide-co-(crotonic acid)] superabsorbents

Superabsorbent polymers of acrylamide (AAm)/crotonic acid (CA) were synthesized by foamed polymerization in an aqueous solution of AAm with CA as a comonomer, initiated by an initiator couple of ammonium persulfate and N,N,N′N′-tetramethylethylenediamine. A crosslinking agent N,N′-methylenebisacrylamide, a foaming agent sodium bicarbonate, and a foam stabilizer, a triblock copolymer of polyoxyethylene/polyoxypropylene/polyoxyethylene, were used in the polymerization. The influences of the relative contents of CA, crosslinking agent, and initiator, on the swelling properties of the superabsorbent polymer systems were examined. The superabsorbent polymer synthesized with an AAm/CA ratio of 98:2 by mole, 0.5 wt.% of N,N′-methylenebisacrylamide and 1 wt.% of ammonium persulfate at 250 rpm and 50 °C for 30 min of polymerization time produced the highest water absorption of 211 ± 9 times its dried weight and could absorb water up to 162 ± 4 g g⁻¹ of the dry copolymer within 10 min. The electrochemical reaction for acrylamide–crotonic acid polymerization was investigated by cyclic voltammetry. The anodic current indicated that acrylamide acting as an electron donor whereas crotonic acid performed as an electron receiver, then providing the cathodic current. The diffusion of water into the superabsorbent polymer was non-Fickian (case II and anomalous). Acrylamide–crotonic acid superabsorbents containing various crosslinker concentrations had a water swelling in the range of 79–289 g g⁻¹. The diffusion coefficients varied between 6.9 × 10⁻⁹ and 5.1 × 10⁻⁸ cm² s⁻¹. Adsorption of the basic dye by the superabsorbent was a monolayer evaluated by the Langmuir isotherm. The superabsorbents can thus be used to adsorb cationic dyes in textile industry.     

The analysis of trans fatty acid profiles in deep frying palm oil and chicken fillets with an improved gas chromatography method

An improved gas chromatography method for the simultaneous separation of 52 fatty acids (FAs) has been developed. For both oleic acid and linoleic acid, a good resolution was achieved for their positional and geometrical (cis/trans) isomers. This method was validated to be precise, accurate and sensitive. With this method, the FAs profiles in palm oil and chicken fillets were analyzed. In general, small changes were observed in the composition of FAs and formation of trans isomers after 8 h frying at the temperature lower than 200 °C. However, with extreme deep-frying process, the thermal degradation and TFAs formation in frying oil increased in direct proportion to frying temperature and time. Moreover, the FAs composition of fried chicken fillets was found to be mostly in correspondence with that of the frying oil, which might be due to the oil absorption or interaction between the frying oils and frying materials.     

An automatic tool for reconstructing monthly time-series of hydro-climatic variables at ungauged basins

Integrative information models for filling/reconstructing hydro-climatic time-series are required for a variety of practical applications. A GIS-based model for a rapid and reliable assessment of monthly time-series of several key hydro-climatic variables at the basin scale, is here developed as plug-in and applied to the entire region of Sicily (Italy). The plug-in, once the desired basin outlet section and time-window are selected, uses appropriate spatial techniques and algorithms to identify its drainage area and estimate the corresponding mean areal rainfall and temperatures time-series. A recent regional regressive rainfall-runoff model is successively applied for the assessment of the runoff time-series. Finally, a consolidated temperature-based method is applied to estimate monthly potential evapotranspiration time-series, while, actual evapotranspiration and soil moisture storage time-series are derived through a classical water balance model. The tool, supported by a preliminarily developed database, includes automatic procedures for data retrieving and processing and a user friendly interface.     

Macaroon-like FeCo2O4 modified activated carbon anode for enhancing power generation in direct glucose fuel cell

Macaroon-like FeCo₂O₄ nanomaterial was prepared and used as electrocatalyst in direct glucose alkaline fuel cell (DGAFC), which exhibited high catalytic activity towards glucose oxidation reaction. Maximum power density of 35.91 W m⁻² was achieved in the DGAFC equipped with a FeCo₂O₄ modified activated carbon (AC) anode, which was almost 151% higher than the control. Physical and electrochemical characterizations were performed to provide further understanding of the origin of its high activity. Our results show that the introduction of FeCo₂O₄ into the AC anode remarkably increase the exchange current density and reduce the charge transfer resistance. It is supposed that there is a synergistic effect between Fe (III) and Co (III), which accelerates electron transfer from glucose to external circuits. This study will promote the development of cost effective and environmentally benign catalysts for electrochemical energy applications.     

Synergetic effects of high-pressure carbon dioxide and nisin on the inactivation of Escherichia coli and Staphylococcus aureus

Synergetic effects of high-pressure carbon dioxide (HPCD) and nisin on Escherichia coli and Staphylococcus aureus were evaluated. Changes in morphology, interior structure, and membrane permeability were analyzed by scanning and transmission electron microscopy, and flow cytometry. Synergetic effects were found, especially in S. aureus. HPCD alone or with nisin led to morphological and intracellular alterations in both bacteria, but nisin alone led to these damages only in S. aureus. A positive correlation between membrane damage and inactivation was found, but ratios of inactivation were higher, probably because of viable but non-culturable state. Mechanisms were proposed for synergism: for E. coli, outer membrane was damaged first by HPCD, and then HPCD and nisin jointly acted on and destroyed the cytoplasmic membrane, leading to further intracellular damage by HPCD; for S. aureus, HPCD and nisin acted on the cytoplasmic membrane together leading to cell death.Industrial RelevanceEscherichia coli and Staphylococcus aureus are two common microorganisms, which exist widely in the environment and easily contaminate food such as vegetables and dairy products, respectively. Considering heat treatment may destroy some heat-sensitive quality of the products, this study evaluated synergetic effects of high-pressure carbon dioxide (HPCD) combined with the bacteriocin nisin. The investigations provided evidence for potentially combined application of HPCD and nisin to help keep food safe in the industry.