Opportunistic channel selection approach under collision probability constraint in cognitive radio systems

In this work, we consider a cognitive radio system with multiple primary channels and one secondary user, and then we introduce a channel-usage pattern model and some basic concepts in this system. Based on this system model and the basic concepts, we propose two opportunistic channel selection algorithms to optimize the throughput of the secondary user: minimum collision rate channel selection algorithm and minimum handoff rate channel selection algorithm. According to the two algorithms, we, respectively, present the channel selection scheme based on minimum collision rate algorithm (CSS-MCRA) and the channel selection scheme based on minimum handoff rate algorithm (CSS-MHRA) under the constraint that the collision probability is bounded below collision tolerable level. Theoretical analysis and simulation results both show that, on one hand, both CSS-MCRA scheme and CSS-MHRA can follow the constraint of collision tolerable level; on the other hand, the performance of CSS-MCRA scheme is better than that of CSS-MHRA scheme if handoff latency is zero or very low, while the performance of CSS-MHRA scheme is better than that of CSS-MCRA scheme if handoff latency is long enough.     

牛肉、牛奶中可的松和氢化可的松含量分析

采用液相色谱-串联质谱技术分析我国部分地区市售牛肉、牛奶中可的松和氢化可的松的含量水平。均质的牛肉或牛奶样品在乙酸-乙酸钠缓冲液中酶解后用甲醇提取，提取液用石墨化碳黑固相萃取小柱和氨基固相萃取小柱净化，洗脱液氮吹至干并用甲醇溶液定容，液相色谱-串联质谱测定。采用SPSS?21.0软件进行数据分析。对采自我国9?省市的346?份牛肉和牛奶样品进行检测，分析牛肉和牛奶中可的松和氢化可的松的存在水平。牛肉和牛奶中均检出可的松和氢化可的松，检出率在86.1%～100.0%之间，检出含量范围为0.02～74.88?μg/kg。牛肉中可的松和氢化可的松的含量平均值（中位数）分别为1.69（1.14）?μg/kg和12.16（8.14）?μg/kg，牛奶中可的松和氢化可的松的含量平均值（中位数）分别为0.23（0.23）?μg/kg和0.72（0.72）?μg/kg。牛肉和牛奶中氢化可的松与可的松的含量均呈显著正相关。     

一例孕产妇单核细胞增生李斯特菌感染的溯源调查及发病机制探讨

目的 针对一例孕产妇李斯特菌病开展病例调查和溯源分析,探讨感染来源和单增李斯特菌病的发病机制,为防控李斯特菌病提供依据。方法 开展现场流行病学调查,收集病例信息,采集病例血液标本、家庭冰箱内食品及厨房环境样本、家庭附近农贸市场的食品样本,针对不同来源样本中的单增李斯特菌进行检测。结果 病例经常食用从农贸市场购买的中式凉拌菜（5～7次/周）,在家自制或二次加工中式凉拌菜。其家庭冰箱冷藏室储存食物生熟不分,且生食水果在冰箱中出现腐烂现象。厨房的两块菜板生熟不分、清洗消毒不及时,厨房操作面存在交叉污染。检测结果显示,11份样本中共分离出3株单增李斯特菌,1株来自该病例的血液标本,2株来自厨房冰箱内食品涂抹和菜板涂抹。提示该病例由于食用污染食品导致感染并通过胎盘屏障感染胎儿。结论 本起事件是丰台区首次在食品和环境中尝试溯源单增李斯特菌病的感染来源。病例家庭冰箱内生肉和胡萝卜、厨房环境涂抹样本中均检出单增李斯特菌,明确了食品与环境交叉污染导致病例单增李斯特菌感染发病;医院的早期识别及处置是避免新生儿不良结局出现的重要保障。     

北京市市售扇贝中诺如病毒监测分析

目的监测北京市市售扇贝中诺如病毒和A组轮状病毒污染状况,分析其基因特征。方法 2014年11月至2015年10月,采集北京市3个水产品出售市场新鲜扇贝72份。取扇贝消化组织,用聚乙二醇(PEG)8000沉淀法进行病毒富集后提取核酸,用实时荧光逆转录-聚合酶链式反应(RT-PCR)法检测诺如病毒和A组轮状病毒核酸。用半巢式RT-PCR方法扩增诺如病毒GⅠ/GⅡ组衣壳蛋白区基因,对PCR产物进行测序,用BioEdit 7.0.9.0软件进行序列比对,用MEGA 6.06软件构建进化树。结果 72份扇贝样品均未检出A组轮状病毒;诺如病毒检出率为27.8%(20/72),其中GⅡ组16份,GⅠ组2份,GⅠ和GⅡ组混合2份。冬季检出率最高,为61.1%(11/18);夏季未检出。8份诺如病毒核酸阳性样品测序结果为GⅡ.17型,属于GⅡ.17型ClusterⅢb分枝。有6株GⅡ.17型毒株与2015年中国人源诺如病毒、2016和2017年日本人源诺如病毒、2017和2018年韩国水中诺如病毒以及2015年日本牡蛎中诺如病毒序列相似性为100.0%。结论北京市市售扇贝中存在诺如病毒污染,食用扇贝有引起病毒性急性胃肠炎的风险。     

Activity of Oritavancin and Its Synergy with Other Antibiotics against Mycobacterium abscessus Infection In Vitro and In Vivo

Background: Pulmonary disease caused by Mycobacterium abscessus (M. abscessus) spreads around the world, and this disease is extremely difficult to treat due to intrinsic and acquired resistance of the pathogen to many approved antibiotics. M. abscessus is regarded as one of the most drug-resistant mycobacteria, with very limited therapeutic options. Methods: Whole-cell growth inhibition assays was performed to screen and identify novel inhibitors. The IC₅₀ of the target compounds were tested against THP-1 cells was determined to calculate the selectivity index, and then time–kill kinetics assay was performed against M. abscessus. Subsequently, the synergy of oritavancin with other antibiotics was evaluated by using checkerboard method. Finally, in vivo efficacy was determined in an immunosuppressive murine model simulating M. abscessus infection. Results: We have identified oritavancin as a potential agent against M. abscessus. Oritavancin exhibited time-concentration dependent bactericidal activity against M. abscessus and it also displayed synergy with clarithromycin, tigecycline, cefoxitin, moxifloxacin, and meropenem in vitro. Additionally, oritavancin had bactericidal effect on intracellular M. abscessus. Oritavancin significantly reduced bacterial load in lung when it was used alone or in combination with cefoxitin and meropenem. Conclusions: Our in vitro and in vivo assay results indicated that oritavancin may be a viable treatment option against M. abscessus infection.     

An unusual 3-D asymmetric mixed valence copper-azido complex with pyrazinecarboxylate as co-ligand showing rare net topology: Hydrothermal synthesis,structure and magnetic properties

A new 3-D mixed valence copper-azido coordination polymer, [Cu^I · Cu^II(N₃)(pzc)₂ (H₂O)]_n1, has been synthesized and characterized, and its magnetic properties studied. In this compound, the azide acts as rare asymmetric μ_1,1,3 bridging mode. The azide ligands and the Cu(2) ions act as 3-connecting nodes, and the Cu(1) ions act as 4-connecting nodes. The overall net takes rare topology with the Schläfli symbol of (6.8²)(6.8²)(6.8⁵).     

MIMC reliability and electrical behavior defined by a physical layer property of the dielectric

Metal–insulator–metal capacitor (MIMC) reliability and electrical properties are defined by the TDDB lifetime, breakdown voltage and leakage current. In this article, the correlation is determined between these electrical properties and the physical and chemical properties of the SiN dielectric layer. It is demonstrated how a SiN dielectrics with a high refractive index have high Si content and show an increased initial leakage current. However, contradictory to the high leakage current, these dielectrics also show high lifetimes. It is shown that SiN dielectrics with a high Si content contain high numbers of charge trapping centers. Over time, a high concentration of trapped charges is build up to such an extend that the local electric field over the dielectric is significantly decreased. This results in the observed reliability improvement of the dielectric. The final intrinsic quality and reliability of MIMC capacitors can therefore be determined by measurable physical properties of the MIMC dielectric at the time of the deposition of this layer.     

Drowned in an inch of water: How poor regulation has weakened the Italian water reform

Italy reformed its water and sanitation services in 1994. The strategy aimed at transforming public entities, financed by the central budget, into self-sufficient professional companies regulated at arms' length. Nearly 20 years after, the reform has failed to deliver (despite some partial success). Italians have been divided in two parties: those blaming public sector inefficiencies and calling for competitive tendering; and those refusing to privatize water and willing to go back to the fiscal budget. In this article, we suggest that both parties are wrong. Underperformance is not related to the ownership structure of water companies, but rather to poor regulatory design and lack of understanding of the regulatory requirements that are implicit in the management model chosen, namely the concession contract.     

Numerical simulation for parameter optimization of silicon purification by electron beam melting

In this paper a mathematical model is developed to investigate the removal of volatile impurities in molten silicon by electron beam melting (EBM) with a high efficiency and low energy consumption. The temperature distribution of molten silicon is obtained using the commercial software FLUENT. Based on the temperature distribution, the vaporization behaviors of phosphorus and silicon are investigated by Langmiur's vaporization theory. The results show that the evaporation rate of silicon during EBM increases exponentially with the increase of beam power, while, it decreases with the increase of scanning radius. The optimal parameters are discussed from the aspect of efficiency and energy saving. The energy consumption decreases with the decrease of scanning radius and with the increase of the beam power. The optimum values are consider to be with a scanning radius of 0.0339 m and a beam power of 23.4 kW for 0.5 kg silicon when phosphorus is removed from 1.44 × 10⁻² to 1 × 10⁻⁵ (wt.%).