Efficiency of acetic acid and formic acid as a catalyst in catalytical and mechanocatalytical pretreatment of barley straw

In this study, the potential of organic acids (formic acid, acetic acid) in a catalytical and mechanocatalytic conversion of lignocellulosic barley straw to valuable sugars is explored using sulfuric acid as a reference. Acid-catalyzed hydrolysis has been carried out with acid-impregnated samples as well as unmodified barley straw. In the mechanocatalytical approach, pretreatment consists of impregnation with the acid catalyst and mechanical treatment by ball milling following chemical hydrolysis. Straw samples and residues were analyzed by Fourier transform infrared spectrometry (FT-IR) whereas hydrolysate analysis was based on total reducing sugar (TRS) determination following the DNS method and capillary electrophoresis (CE) analysis. The results indicated that acetic acid and formic acid are rather mild acids yielding low TRS levels compared to the reference acid. Mechanocatalytical pretreatment slightly increased TRS yields, but not significantly. Strikingly, sulfuric acid showed an efficient conversion efficiency yielding almost 45% of TRS. Furthermore, this study provided evidence for the acetylation of straw components when acetic acid was used as catalyst. Alkali hydrolysis induced the de-esterification, but revealed no significant increase of TRS yields.     

Valorization of Eucalyptus wood by glycerol-organosolv pretreatment within the biorefinery concept: An integrated and intensified approach

The efficient utilization of lignocellulosic biomass and the reduction of production cost are mandatory to attain a cost-effective lignocellulose-to-ethanol process. The selection of suitable pretreatment that allows an effective fractionation of biomass and the use of pretreated material at high-solid loadings on saccharification and fermentation (SSF) processes are considered promising strategies for that purpose. Eucalyptus globulus wood was fractionated by organosolv process at 200 °C for 69 min using 56% of glycerol-water. A 99% of cellulose remained in pretreated biomass and 65% of lignin was solubilized. Precipitated lignin was characterized for chemical composition and thermal behavior, showing similar features to commercial lignin. In order to produce lignocellulosic ethanol at high-gravity, a full factory design was carried to assess the liquid to solid ratio (3–9 g/g) and enzyme to solid ratio (8–16 FPU/g) on SSF of delignified Eucalyptus. High ethanol concentration (94 g/L) corresponding to 77% of conversion at 16FPU/g and LSR = 3 g/g using an industrial and thermotolerant Saccharomyces cerevisiae strain was successfully produced from pretreated biomass. Process integration of a suitable pretreatment, which allows for whole biomass valorization, with intensified saccharification-fermentation stages was shown to be feasible strategy for the co-production of high ethanol titers, oligosaccharides and lignin paving the way for cost-effective Eucalyptus biorefinery.     

Quercetagetin loaded in soy protein isolate–κ-carrageenan complex: Fabrication mechanism and protective effect

In the present study, the potential of soy protein isolate (SPI)–κ-carrageenan (κ-CG) complex as a protective carrier for quercetagetin was investigated at different pH values (pH 2.3 and 6.5). The particle size of the ternary aggregates was slightly increased at pH 2.3, yet dramatically decreased at pH 6.5 with increasing quercetagetin concentration. Moreover, the negative ζ-potential of the ternary aggregates was increased significantly (p < 0.05) at pH 6.5. The addition of quercetagetin to the SPI–κ-CG complex could highly quench the intrinsic fluorescence of SPI. Circular dichroism spectra further suggested that the bound quercetagetin could induce the rise of β-sheet and β-turn contents at the cost of α-helix and unordered coil fractions of SPI. In addition, quercetagetin could increase the viscoelasticity of the ternary aggregates at both pH. Furthermore, the SPI–κ-CG complex was found to be superior to single SPI or κ-CG in terms of improving light stability and radical scavenging ability of quercetagetin.     

Accelerated bioactive behavior of Nagelschmidtite bioceramics: Mimicking the nano and microstructural aspects of biological mineralization

The ability of the Nagelschmidtite (Nagel) phase to promote osteogenesis, cementogenesis, and angiogenesis increased the interest in using this calcium silicophosphate bioceramic for tissue regeneration and vascularization applications. Nagel phase is a solid solution with the general formula Ca_7-xNa_x(PO₄)_2+x(SiO₄)_2-x, which allows several substitutions being Ca₇(PO₄)₂(SiO₄)₂ the most reported stoichiometry. Inspired by the well-known 45S5 bioactive glass chemical composition, we developed a synthesis route to obtain a Na-rich Nagel single phase. The effect of this bioceramic chemical and structural properties on apatite formation and crystallization mechanism is reported. The structural aspects at the nano and microscale of the mechanism of apatite growth and crystallization from the Nagel phase were compared to the formation process of Extra-Cellular Matrix (ECM) deposits in biological systems, revealing a biomimetic behavior during the apatite biomineralization process from the bioceramic.     

Effects of larval crowding and nutrient limitation on male phenotype,reproductive investment and strategy in Ephestia kuehniella Zeller (Insecta: Lepidoptera)

Food shortage experienced by juvenile insects affects adult morphology and life-history traits. Developmental plasticity and trade-off between ecological and sexual traits helps maximise individual fitness. Ephestia kuehniella were reared at different larval densities to investigate phenotypic shifts in adult males. Variation in ecological traits (sizes of forewing, head and thorax and adult longevity) and sexual traits (valva and aedeagus, sperm number, mating frequency) were compared. Males that emerged from highest density population (800) had lower body mass and small forewings, head and thorax, suggesting that they could not completely compensate for food shortage. The allometric relationship between body mass and forewing length also changed, and these males had relatively longer wings. This arrangement may enhance dispersal and assist in mate-searching at higher densities. Males from all larval densities achieved similar mating frequency but those from higher density produced fewer eupyrene sperm and had shorter adult lifespan. By mating more frequently and maintaining apyrene sperm production, males increase their reproductive success at sperm competition observed at higher densities. Food stress associated with high density populations did not affect valva and aedeagus size indicating that these traits may be insensitive to external environmental changes because they incur fitness costs to males.     

Geometric view factors for thermal radiation hazard assessment

Estimating the thermal radiation field surrounding a large fire involves characterization of the flame geometry and computation of radiant intensity at a given location. The latter requires computation of geometric view factors. In this article, closed form expressions that are common in the design of impoundment systems. These include tilted cylindrical and rectangular geometries. The computed geometric view factors compare very well with limited experimental data for circular geometries. The closed form expressions allow rapid computation of view factors that are necessary in estimating the fire hazards associated with large hydrocarbon pool fires.     

Waste frying oil as a precursor for one-step synthesis of sulfur-doped carbon dots with pH-sensitive photoluminescence

Proper disposal of waste frying oil (WFO) is an important waste-management concern. In this paper, we develop a facile method to reuse WFO for one-step synthesis of sulfur-doped carbon dots (S-C-dots) with the assistance of concentrated sulfuric acid. The as-synthesized S-C-dots are uniform in size and show partial disordered graphite-like structure. Different from the doping-free or nitrogen-doped carbon dots, the S-C-dots perform a strong ultraviolet emission at 378 nm due to successful sulfur-doping. Noticeably, the S-C-dots exhibit a distinct pH-sensitive feature and the intensity of photoluminescence increases linearly in the pH range from 3 to 9. Furthermore, possessing fascinating optical properties, high photostability, and low cytotoxicity, the S-C-dots have served as fluorescent probes for cell imaging.     

Geostatistical analysis of adult Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae) in wheat stored at constant temperatures

Insect monitoring and sampling programmes are used in the stored grains industry for the detection and estimation of insect pests. At the low pest densities dictated by economic and commercial requirements, the accuracy of both detection and abundance estimates can be influenced by variations in the spatial structure of pest populations over short distances. Geostatistical analysis of Rhyzopertha dominica populations in 2-dimensions showed that, in both the horizontal and vertical directions and at all temperatures examined, insect numbers were positively correlated over short (0–5 cm) distances, and negatively correlated over longer (≥10 cm) distances. Analysis in 3 dimensions showed a similar pattern, with positive correlations over short distances and negative correlations at longer distances. At 35 °C, insects were located significantly further from the grain surface than at 25 and 30 °C. Dispersion metrics showed statistically significant aggregation in all cases. This is the first research using small sample units, high sampling intensities, and a range of temperatures, to show spatial structuring of R. dominica populations over short distances. This research will have significant implications for sampling in the stored grains industry.     

Ethanol production from agroindustrial biomass using a crude enzyme complex produced by Aspergillus niger

This study investigates ethanol production from simultaneous fermentation and saccharification (SFS) and separated hydrolysis and fermentation (SHS) using enzyme complexes produced by Aspergillus niger strains (ATCC 16404, ATCC 1057, ATCC 9029). The enzyme complexes were produced by solid-state fermentation (SSF) on inexpensive and readily available agroindustrial products: rice byproduct (composed of AFEX-treated rice rust and rice bran), whey and sugarcane bagasse. The ethanol was produced by Saccharomyces cerevisiae Y904 using whey and rice byproduct as the substrate and the enzyme complex produced by A. niger. The best result for solid-state fermentation (40 U/g of dry substrate, A. niger ATCC 16404) was obtained in a 0.5 L rotating drum bioreactor at 40 °C filled half filled with solid biomass composed of rice byproduct (86% wt/wt), whey (12% wt/wt) and CaCl₂ (2.0% wt/wt). The best result for ethanol fermentation (11.7 g/L of ethanol) was obtained after 12 h of SFS at pH 4.5 and 35 °C. A comparative study of ethanol production by Trichoderma reesei CCT 2768 and A. niger ATCC 16404 complexes under the same optimised SFS and SSF conditions was also performed, revealing that ethanol production by the A. niger enzyme complex was 2.25 times higher than that by T. reesei. These findings suggest that the ethanol production using crude enzymatic complexes produced by A. niger and agroindustrial biomass described in this paper is very promising in terms of disposal of the whey produced by cheese-making and other dairy food processing.