Multiplex PCR system to track authorized and unauthorized genetically modified soybean events in food and feed

A diverse range of genetic elements has been used to develop genetically modified organisms (GMOs) over the last 18 years. Screening methods that target few elements, such as the Cauliflower Mosaic Virus 35S promoter (P-35S) and Agrobacterium tumefaciens nopaline terminator (T-nos), are not sufficient to screen GMOs. In the present study, a multiplex PCR system for all globally commercialized GM soybean events was developed to easily trace the events. For this purpose, screening elements of 24 GM soybean events were investigated and 9 screening targets were selected and divided into three individual triplex PCR systems: P-35S, ribulose-1,5-bisphosphate carboxylase small subunit promoter of Arabidopsis thaliana, T-nos, T-35S, pea E9 terminator, open reading frame 23 terminator of A. tumefaciens, proteinase inhibitor II terminator of potato, acetohydroxy acid synthase large subunit terminator of A. thaliana, and the revealed 3′ flanking sequences of DP-305423-1. The specificity of the assays was confirmed using thirteen GM soybean events as the respective positive/negative controls. The limit of detection of each multiplex set, as determined using certified reference materials of specific GM events, ranged from 0.03 to 0.5%, depending upon target. Furthermore, 26 food samples that contained soybean ingredients, which were purchased from the USA, China, Japan, and Korea, were analyzed, 17 of which contained one or more GM soybean events. These results suggest that the developed screening method can be used to efficiently track and identify 24 GM soybean events in food and feed.     

HPLC–MS analysis of the green food colorant sodium copper chlorophyllin

Five commercial samples of sodium copper chlorophyllin, a green food colorant, were analysed by high-performance liquid chromatography (HPLC) using diode-array detection (DAD) and mass spectrometry (MS). Some of the constituents were identified using authentic standards, whereas others were identified tentatively based on their absorption spectra and mass data. The composition of three of the samples was very similar, whereas the other two were quite different. In the three former samples, the three largest peaks could be assigned to Cu chlorin e₆, Cu chlorin p₆, and Cu isochlorin e₄. In one of the two other samples, these three compounds were also among the largest peaks, whereas Cu chlorin e₆ was a small peak in the last sample and Cu chlorin p₆ was absent altogether. Porphyrins were also present in the samples, while except in one of the samples chlorins derived from chlorophyll b were largely absent.Industrial relevanceSodium copper chlorophyllin is a green food colorant made from chlorophyll. Sodium copper chlorophyllin is made by saponifying chlorophyll and coppering the resulting product. This processing leads to a complex mixture of compounds. An analytical method was developed that can be used to identify many of these compounds and show the extent of coppering and degradation of sodium copper chlorophyllin, which may be used industrially to optimize the production of sodium copper chlorophyllin.     

Facial synthesis of dandelion-like g-C3N4/Ag with high performance of photocatalytic hydrogen production

Nowadays, energy shortage is one of the major problems in the world. Photocatalytic hydrogen production is a new type of energy technology with good application prospect. As a new type of photocatalytic semiconductor material, g-C₃N₄ has attracted much attention as a photocatalyst. By ultrasonic treatment of a mixed solution of g-C₃N₄ and bovine serum albumin, followed by adding a certain amount of silver nitrate solution and then directly hydrothermal treatment, a special dandelion-like g-C₃N₄/Ag (D-g-C₃N₄/Ag) was prepared. The scanning electronic microscopy, transmission electronic microscopy, X-ray diffraction, Fourier transform infrared, fluorescence and physicochemical adsorption methods were used to characterize the morphology and structure of D-g-C₃N₄/Ag. In addition, the photocatalytic H₂ production of D-g-C₃N₄/Ag with different Ag loadings or in different sacrificial agents and different pH conditions were investigated. The results indicated that when triethanolamine was used as sacrificial agent, photocatalytic hydrogen efficiency was the best, and the rate of photocatalytic hydrogen production reached 862 μmol g⁻¹ h^{− 1} as the Ag loading was 4%.     

Comparative susceptibility of Corcyra cephalonica (Lepidoptera: Pyralidae) eggs to carbon dioxide and nitrogen at different temperatures

The aim of this study was to evaluate the susceptibility of the egg stage of the rice moth Corcyra cephalonica to modified atmospheres (MAs) enriched with CO₂ or N₂ at 25, 30 and 35 °C combined with various exposure times. The tested modified atmospheres containing CO₂ were 20% CO₂, 16% O₂ and 64% N₂; 40% CO₂, 12% O₂ and 48% N_2; 60% CO₂, 8% O₂ and 32% N₂ and 80% CO₂, 4% O₂ and 16% N₂. The tested modified atmospheres containing N₂ were 97% N₂ and 3% O₂ and 98% N₂ and 2% O₂. The results showed that the hatchability responding to modified atmospheres enriched with either CO₂ or N₂ decreased significantly with an increase in exposure time, gas content (%) and temperature. All tested combinations provided complete (100%) egg control in less than 4 days. Based on 100% mortality, shorter exposures were obtained with 80% CO₂ than with N₂ at most tested temperatures. The modified atmospheres enriched with 98% N₂ were more effective than 97% N₂ against C. cephalonica eggs, especially at 35 °C. It is recommended to use high levels of CO₂ in air (80%) and N₂ (98%) in controlling 0–24-h-eggs of C. cephalonica within 24–36 h for CO₂ and 18–72 h for N₂.     

Sensory characterisation of food and beverage stimuli containing β-ionone and differences between individuals by genotype for rs6591536

The aroma compound β-ionone is present in many fruits and vegetables and their derived products. Odour profiles at different β-ionone concentrations and perceived contributions of β-ionone to food/beverage flavour have only been partially established, and they generally do not extend to differences among individuals who vary in their sensitivity to the odour. Recent research has identified rs6591536, a single nucleotide polymorphism (SNP) located in the coding region of the odorant receptor OR5A1 as responsible for major differences in ability to detect β-ionone odour. In Study 1, using trained sensory panellists (n = 12), odour profiles were obtained for a range of β-ionone concentrations and compared across sensitivity groups defined by genotypes for rs5691536 (GG/AG or AA). A similar comparative approach was used in Studies 2 and 3, where participants (n = 104 and 158) characterised food/beverage stimuli containing added β-ionone using check-all-that-apply questions. The concentration of β-ionone required to elicit perception of the ‘floral’, ‘rose/violet’ and ‘aromatic/fragrant’ characteristics typically associated with β-ionone depended on the background fruit flavour (apple, raspberry, orange) and/or the product type (juice, jelly). It also differed among people classified as more sensitive (“sensitive”) and more insensitive (“insensitive”) to the odour of β-ionone. Perception of negative aspects of β-ionone (incl. ‘sour, acid, vinegar’, ‘sharp, pungent’, ‘soap’, ‘chemical’, ‘artificial’, ‘aftertaste’, ‘woody’) was encountered in all studies, but with varying frequency depending on concentration of added β-ionone and whether participants were “sensitive” or “insensitive” to β-ionone. There was some evidence in Study 3 that perception of β-ionone flavour was masked by the fruity flavours of the test products and that changes in ‘sweet’ and ‘fruity’ were associated with β-ionone spike concentration. Overall, this research suggests a need to consider genotype-encoded sensitivity together with other variables when measuring human flavour perception.     

流通领域中环境因素对盐渍榨菜品质变化的影响

研究盐渍榨菜在流通过程中环境因素:流通温度、流通湿度、光照强度、流通时间作用下的品质变化规律,采用响应面法得出各因素对盐渍榨菜品质影响,并确定相应的数学模型,从而得出影响因素与榨菜品质变化的关系.     

Viscosity effect of ionic liquid-assisted controlled growth of CH3NH3PbI3 nanoparticle-based planar perovskite solar cells

A precise control of the morphology and crystallization of perovskite thin-films is well-correlated to higher perovskite solar cells performances. Ionic liquids (ILs) can retard perovskite crystallization to aid the formation of films with uniform morphology to realize highly efficient perovskite solar cells. Herein, we attempt to control the nanostructural growth of CH₃NH₃PbI₃ thin films by adding ILs to the perovskite spin-coating solution and investigate the effect of IL viscosity on the resulting CH₃NH₃PbI₃ nanoparticle (NP) thin films. NPs with desirable morphology were obtained using ILs with a low viscosity that completely dissolved in the CH₃NH₃PbI₃ solution. In particular, the IL tetrabutylammonium chloride yielded NPs with a diameter of 500 nm and controllable morphology, crystallinity, and absorption behavior, which led to improved photovoltaic performance compared with that of solar cells containing NPs produced using other ILs. Our findings revealed a pathway to obtain uniformly distributed CH₃NH₃PbI₃ NP thin films for use in perovskite solar cells. The developed method is well suited for large-scale production of perovskite thin films on flexible substrates.     

Detoxification of zearalenone by Lactobacillus pentosus strains

Zearalenone (ZEA) contamination in food samples plays a critical role in food safety, since it causes serious health problems. Usage of microorganisms, such as lactic acid bacteria (LAB), is a promising new approach for detoxification. Eight Lactobacillus pentosus strains were evaluated for their ability to remove ZEA from a sodium acetate buffer solution with initial ZEA concentrations of 5.51–74.70 μg/mL. The adsorption capacity increased with increasing ZEA concentrations. The strain JM0812 showed the highest adsorption capability, at 83.17%, in solution containing 74.70 μg/mL ZEA, followed by UM054 (82.78%) and UM055 (81.69%), respectively. Three adsorption isotherms were applied to predict the removal efficiency of ZEA and the Freundlich isotherm appeared to have the best-fit for ZEA sorption onto bacterial cells. Our results indicate that Lb. pentosus strains are novel promising strains to reduce mycotoxin contamination in food products.     

Flocculation and mechanism of self-flocculating lipid producer microalga Scenedesmus quadricauda for biomass harvesting

In this study, the extracellular polymeric substance of Scenedesmus quadricauda called EPS-S.q and its bioflocculatoin mechanism were investigated. Results showed EPS-S.q was successfully used as bioflocculating agent for S. quadricauda biomass harvesting and flocculation efficiency of up to 86.7% to S. quadricauda cells could be achieved in presence of Zn²⁺. EPS-S.q was the flocculating agent for self-flocculating microalga S. quadricauda and bioflocculation mechanism was polymer bridging. The sugar and protein mass fraction of dry EPS-S.q was sugar 56.7% and protein 41%. The infrared spectrum further indicated the presence of hydroxyl, carboxyl and amino groups. Moreover, pH decrease induced the flocculation of S. quadricauda and 78.4% of flocculation efficiency was the highest at pH 3. In addition, chemical flocculant FeCl₃ was efficiently used for S. quadricauda harvesting and up to 96.8% of flocculation efficiency could be achieved for S. quadricauda culture with biomass concentration 0.21–0.39 g L⁻¹ at pH 7.     

Thermal markers arising from changes in the protein component of milk

Classification of heat load applied to milk requires the detection of parameters appropriately related to the intensity of the heat treatment. Current analytical methods based on heat-induced changes in the protein component of milk have been directed either to determine the amount of protein-derived products arised from heat treatments or to evaluate the extent of thermal denaturation of milk proteins. Lately, a new analytical strategy has been developed according to the occurrence of three major whey proteins, namely bovine serum albumin (BSA), beta-lactoglobulin (βlg) and alfa-lactalbumin (αla), normally soluble at pH 4.6 in raw milk, in the pH 4.6 insoluble protein fraction recovered from heat-treated milk. The results have shown that pH 4.6 insoluble BSA, βlg and αla, as detected by ELISA in milk, can be regarded as thermal markers suited for either dairy process control or regulation purposes.