Double emulsion (W/O/W) gel stabilised by polyglycerol polyricinoleate and calcium caseinate as mangiferin carrier: insights on formulation and stability properties

Mangiferin (MGF) is a phenolic compound isolated from mango, but its poor solubility significantly limits its use. In this study, MGF was embedded into the inner aqueous phase of W₁/O/W₂ emulsions. Firstly, the dissolution method of MGF was determined. MGF remained stable in solution with pH 13 at 30 min, and its solubility reached 10 mg mL⁻¹. When the pH of MGF solutions was adjusted from pH 13 to pH 6, MGF did not immediately crystallise, providing sufficient time to construct the MGF-loaded W₁/O/W₂ emulsions. Subsequently, the MGF-loaded W₁/O/W₂ emulsions were constructed using polyglycerol polyricinoleate (PGPR) and calcium caseinate (CAS). The formation and stability of the W₁/O/W₂ emulsions were investigated. The MGF-loaded W₁/O/W₂ emulsions stabilised with 1% PGPR and 1% – 3% CAS exhibited a low viscosity, limited loading capacity, and poor stability. Conversely, the MGF-loaded W₁/O/W₂ emulsions stabilised by 3%PGPR–3%CAS exhibited optimal loading capacity (encapsulation efficiency = 95.31% and loading efficiency = 0.91%) and stability, which was attributed to the fact that high viscosity and gel state retarded the migration of inner aqueous phase. These results indicated that the W₁/O/W₂ emulsions stabilised by PGPR and CAS may be a potential alternative for encapsulating mangiferin.     

Constructing developable surfaces by wrapping cones and cylinders

We model developable surfaces by wrapping a planar figure around cones and cylinders. Complicated developables can be constructed by successive mappings using cones and cylinders of different sizes and shapes. We also propose an intuitive control mechanism, which allows a user to select an arbitrary point on the planar figure and move it to a new position. Numerical techniques are then used to find a cone or cylinder that produces the required mapping. Several examples demonstrate the effectiveness of our technique.     

Novel core-shell-like Ni-supported hierarchical beta zeolite catalysts on bioethanol steam reforming

Hierarchical-Beta zeolites have been hydrothermally synthesized by adding a new gemini organic surfactant. The used gemini surfactant play the role of a “pore-forming agents” on the mesoscale, on the same time, providing alkaline environment for the system. With this hierarchical Beta zeolite as the core support, we successfully prepared a shell layer of Ni-containing (22 wt%) petal-like core-shell-like catalyst and applied it to bioethanol steam reforming. At the reaction temperature of 350 °C–550 °C, the conversion rate of ethanol and the selectivity of hydrogen were always above 85% and 70%. After reaction of 100 h on stream at 400 °C, there were not obvious inactivation could be observed on NiNPs/OH-MBeta catalyst.     

Application of an electronic nose for quality assessment of modified atmosphere packaged poultry meat

The applicability of an electronic nose for the quality control of modified atmosphere (MA) packaged broiler chicken cuts was evaluated in different temperature regimes. The electronic nose results were compared with those obtained by microbiological, sensory and headspace GC analyses. The electronic nose could clearly distinguish broiler chicken packages with deteriorated quality from fresh packages either earlier than or at the same time as the sensory quality deteriorated. Concerning the microbiological quality, the counts of Enterobacteriaceae and hydrogen sulphide-producing bacteria were most consistent with the electronic nose results. The results indicated that the electronic nose was capable of detecting even early signals of spoilage in MA packed poultry meat.     

A comprehensive approach to evaluating watershed models for predicting river flow regimes critical to downstream ecosystem services

Selection of strategies that help reduce riverine inputs requires numerical models that accurately quantify hydrologic processes. While numerous models exist, information on how to evaluate and select the most robust models is limited. Toward this end, we developed a comprehensive approach that helps evaluate watershed models in their ability to simulate flow regimes critical to downstream ecosystem services. We demonstrated the method using the Soil and Water Assessment Tool (SWAT), the Hydrological Simulation Program–FORTRAN (HSPF) model, and Distributed Large Basin Runoff Model (DLBRM) applied to the Maumee River Basin (USA). The approach helped in identifying that each model simulated flows within acceptable ranges. However, each was limited in its ability to simulate flows triggered by extreme weather events, owing to algorithms not being optimized for such events and mismatched physiographic watershed conditions. Ultimately, we found HSPF to best predict river flow, whereas SWAT offered the most flexibility for evaluating agricultural management practices.     

抗性淀粉测定方法的研究

抗性淀粉的测定方法有Berry法、Englys法、Bjorck法、Champ法、Goni法等.以木薯抗性淀粉和抗性淀粉标准品为原料,通过对抗性淀粉的处理方法(AOAC法、Goni法)以及还原糖的测定方法(3,5-二硝基水杨酸法、D-葡萄糖法)进行对比,得到木薯抗性淀粉最适合的测定方法.同时也研究了样品多少对测定结果的影响.结果表明,AOAC-GOPOD法操作简单、准确性高、重复性好,酶用量充足,是测定木薯抗性淀粉的首选方法.     

Efficiency of acetic acid and formic acid as a catalyst in catalytical and mechanocatalytical pretreatment of barley straw

In this study, the potential of organic acids (formic acid, acetic acid) in a catalytical and mechanocatalytic conversion of lignocellulosic barley straw to valuable sugars is explored using sulfuric acid as a reference. Acid-catalyzed hydrolysis has been carried out with acid-impregnated samples as well as unmodified barley straw. In the mechanocatalytical approach, pretreatment consists of impregnation with the acid catalyst and mechanical treatment by ball milling following chemical hydrolysis. Straw samples and residues were analyzed by Fourier transform infrared spectrometry (FT-IR) whereas hydrolysate analysis was based on total reducing sugar (TRS) determination following the DNS method and capillary electrophoresis (CE) analysis. The results indicated that acetic acid and formic acid are rather mild acids yielding low TRS levels compared to the reference acid. Mechanocatalytical pretreatment slightly increased TRS yields, but not significantly. Strikingly, sulfuric acid showed an efficient conversion efficiency yielding almost 45% of TRS. Furthermore, this study provided evidence for the acetylation of straw components when acetic acid was used as catalyst. Alkali hydrolysis induced the de-esterification, but revealed no significant increase of TRS yields.     

Effects of different osmo‐dehydrofreezing treatments on the volatile compounds,phenolic compounds and physicochemical properties in mango (Mangifera indica L.)

The influences of different osmotic solution pretreatments (sucrose, glucose and maltose with concentration of 45%) on the volatile compounds, phenolic compounds and other physicochemical parameters in frozen mangoes were studied. Volatile and phenolic compounds were measured using SPME/GC‐MS and HPLC method, respectively. The results revealed that compared with untreated frozen mango, some volatile compounds (e.g. alcohols, aldehydes and some terpenes and esters) increased significantly and there were more compounds identified in osmo‐dehydrofrozen samples. These changes positively affected mango aroma and resulted in higher sensory scores for osmo‐dehydrofrozen samples. In addition, data on phenolic compounds showed that dehydrofrozen samples pretreated in glucose and sucrose had higher ρ‐hydroxybenzoic acid and quercetin contents, respectively, while samples pretreated in maltose showed higher ρ‐coumaric acid and sinapic acid contents compared with untreated frozen samples. The current work indicates that osmo‐dehydrofreezing can improve the retention of phenolic and aromatic compounds in frozen mango.     

Validation of the sensitive and accurate quantitation of the fatty acid distribution in bovine milk

A method for the precise analysis of the complex mixture of fatty acids in milk has been developed and validated. The triacylglycerol of nonanoic acid was applied as the internal standard (ISTD) for absolute quantification. Milk lipids were extracted by miniaturised ultrasonication and methylated with trimethylsulfonium hydroxide. Resulting fatty acid methyl esters were determined by gas chromatography with flame ionisation detection giving excellent resolution, including separation of several 18:1 isomers. The low quantitation limit (0.01 mg mL⁻¹ milk) indicates that the sensitivity of the method is sufficient to quantify up to 50 fatty acids, from 4:0 to 23:0. Measurements of precision provided excellent results for different bovine milk samples of different fat content (coefficient of variance: 1.9% and 9.8% for intra- and interday precision, respectively). Recovery averaged 108 ± 3.5%. Evaluation of methods for determining the total fat content showed that gravimetry is no longer needed when using the ISTD.