负载羧基化球状介孔纳米颗粒TFN膜的研究

在薄层复合膜(thin-film composite membrane, TFC膜)中引入无机纳米颗粒，形成薄层纳米复合膜(thin-film nanocomposite membrane, TFN膜)，近几年作为反渗透膜开始应用于水处理研究。但是无机纳米颗粒在TFC膜中的性能的不稳定性和膜的机械强度等变成了突出问题。合成制备了粒径约为110 nm修饰羧基的介孔氧化硅球状纳米颗粒(MSN—COOH)，并将其成功地化学键合在TFC膜的表面功能层交联网络中。与TFC膜相比，键合有MSN—COOH的TFN膜，水通量提高了56.2%，保持高脱盐率；由于单分散介孔纳米颗粒表面亲水官能团的引入，使膜表面的亲水性有很大程度提高，单分散介孔纳米颗粒在基体中的有序排列，使膜表面粗糙度降低，提高了膜的抗污染能力。与普通TFN膜相比较，具有更好的稳定性和柔韧性，可以在长时间高压过滤操作下保持稳定。     

Incidence and costs of bicycle-related traumatic brain injuries in the Netherlands

The main cause of death and serious disability in bicycle accidents is traumatic brain injury (TBI). The aim of this population-based study was to assess the incidence and costs of bicycle-related TBI across various age groups, and in comparison to all bicycle-related injuries, to identify main risk groups for the development of preventive strategies.Data from the National Injury Surveillance System and National Medical Registration were used for all patients with bicycle-related injuries and TBI who visited a Dutch emergency department (ED) between 1998 and 2012. Demographics and national, weighted estimates of injury mechanism, injury severity and costs were analysed per age group. Direct healthcare costs and indirect costs were determined using the incidence-based Dutch Burden of Injury Model.Between 1998 and 2012, the incidence of ED treatments due to bicycle-related TBI strongly increased with 54%, to 43 per 100,000 persons in 2012. However, the incidence of all bicycle-related injuries remained stable, from 444 in 1998 to 456/100,000 in 2012. Incidence of hospital admission increased in both TBI (92%) and all injuries from cycling (71%). Highest increase in incidence of both ED treatments and hospital admissions was seen in adults aged 55+. The injury rate of TBI per kilometre travelled increased (44%) except in children, but decreased (−4%) for all injuries, showing a strong decrease in children (−36%) but an increase in men aged 25+, and women aged 15+. Total costs of bicycle-related TBI were €74.5 million annually. Although bicycle-related TBI accounted for 9% of the incidence of all ED treatments due to cycling, it accounted for 18% of the total costs due to all bicycle-related injuries (€410.7 million). Children and adolescents (aged 0–24) had highest incidence of ED treatments due to bicycle-related injuries. Men in the working population (aged 15–64) had highest indirect costs following injuries from cycling, including TBI. Older cyclists (aged 55+) were identified as main risk group for TBI, as they had highest ED attendance, injury rate, injury severity, admission to hospital or intensive care unit, and costs.Incidence of ED treatments due to cycling are high and often involve TBI, imposing a high burden on individuals and society. Older cyclists aged 55+ were identified as main risk group for TBI to be targeted in preventive strategies, due to their high risk for (serious) injuries and ever-increasing share of ED visits and hospital admissions.     

A review on some classes of algebraic systems

ABSTRACT

In this paper, we review some algebraic control system. Precisely, linear and bilinear systems on Euclidean spaces and invariant and linear systems on Lie groups. The fourth classes of systems have a common issue: to any class, there exists an associated subgroup. From this object, we survey the controllability property. Especially, from those coming from our contribution to the theory.     

“These devices have not been made for older people's needs” – Older adults' perceptions of digital technologies in Finland and Ireland

This article examines how older adults use and perceive digital technologies in Finland and Ireland. These two countries are at different stages regarding two important global trends – demographic ageing and digitalization. Finland, being the fastest ageing society in Europe, is also one of the leaders in implementing digital technologies in social and health care services. In contrast, Ireland is a demographically younger and less digitalized society. Drawing on focus group discussions on the usage of digital technologies, conducted with older adults in both countries, we analyse how digital technologies are adopted and viewed by older generations. The analyses showed that older adults associate digitalization with both advantages and drawbacks. To encapsulate these two contrasting aspects, we developed the term Janus-faced conceptions of technology. This concept encapsulates how the successful adoption of digital technology facilitates everyday activities whereas the inability to utilise technologies results in feelings of alienation and being out-of-touch. The digital divide was found to occur not only between generations but also between different socioeconomic groups of older adults.     

Framework to manage multiple goals in community-based energy sharing network in smart grid

Smart grid has opened up a new role of “prosumer” in an energy value network, transforming many conventional energy consumers into prosumers, who not only generate green energy but also share the surplus with utilities and other consumers. The concept of a goal-oriented prosumer community group (PCG) has emerged recently as an effective way to fulfill sustainable energy exchange. Such community-based energy sharing networks comprise multiple irreconcilable objectives such as demand constraints, cost constraints, and income maximization. In many cases, one goal may be achievable only at the expense of other goals. This necessitates the development of an effective framework to manage the multiple goals and reduce the gap with their achievement levels. Therefore, in this research paper, an effective framework is developed to negotiate among the multiple goals and thus to define optimal mutual goals for each PCG in a more sustainable manner using multiple-criteria goal programming techniques. Simulation results are presented to illustrate how the methods work in practical situations, where each of the objective measure is given a target value and the unwanted deviations from this set are minimized in an achievement function.     

Polyimide/nano-TiO2 hybrid films having benzoxazole pendent groups: In situ sol–gel preparation and evaluation of properties

Polyimide/titania (PI/TiO₂) nanocomposite films have been successfully fabricated through the in situ formation of TiO₂ within a PI matrix via sol–gel method. Poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized by mixing pyromellitic dianhydride (PMDA), with equimolar amount of a diamine monomer having a pendent benzoxazole unit and two flexible ether linkages in N,N-dimethylformamide (DMF) solvent. Tetraethyl orthotitanate [Ti(OEt)₄] and acetylacetone were then added to the resulted PAA. After imidization at high temperature, PI/TiO₂ hybrid films were formed. The structure and morphology of the hybrid nanocomposites with different titania contents (0 wt%, 5 wt%, 10 wt%, and 15 wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy. The results indicate that the TiO₂ nanoparticles were homogeneously dispersed in the hybrid films. The thermogravimetric analysis of nanocomposites confirms the improvement in the thermal stability with the increase in the percentage of titania nanoparticle. Transmission electron microscopy showed that the nanoparticles with an average diameter of 25–40 nm were dispersed in the polymer matrix.     

One-Pot Methods for the Protection and Assembly of Sugars

In recent years, there has been rapid expansion of glycan synthesis, fueled by the recognition that the structural complexity of sugars translates to a myriad of biological functions. Such chemical syntheses involve many challenges, mostly due to the regio- and stereochemical aspects of glycosidic bond formation. One-pot strategies were developed to assist in attaining faster and more economical access to the glycan constructs. In this front, achievements in protecting group manipulation, glycosylation, and combinations of these have been reported. Protecting group manipulations in one pot take advantage of the reaction compatibility of commonly used transformations, many of which occur in high regioselectivity. Sequential glycosylations, on the other hand, rely on leaving group orthogonalities and reactivity tuning, as well as the preactivation technique. Altogether, these approaches offer attractive means to the much needed glycan structures and, consequently, help usher in advances in glycoscience.     

Enhancing cation exchange capacity of chars through ozonation

The use of ozone to increase the cation exchange capacity (CEC) of two chars produced from pyrolysis of Douglas fir (Pseudotsuga menziessii) and a control bituminous coal activated carbon (AC) is reported. Chars were produced from the wood fraction of Douglas fir (DFWC) and the bark (DFBC) at 500 °C using an auger driven reactor with a nitrogen sweep gas under mild vacuum. Five ozone treatment times, ranging from 5 min to 60 min, were investigated. The initial properties of each char were found to differ significantly from the other samples in terms of surface area, proximate composition, and elemental composition. DFWC did not show significant mass loss or temperature variation during ozone treatment; however, after 1 h of oxidation both DFBC and AC samples resulted in 20% and 30% mass loss, respectively, and reactor temperatures in excess of 60 °C. Analysis of the pore size distribution of each treatment shows that ozone treatment did not significantly affect small micropores after 30 min of treatment for any material, but did reduce the apparent surface area of mesopores. Increases in carboxylic groups were identified with ozone treatment and found to correlate strongly with changes in measured CEC. The formation of lactone was found to correlate positively with reactor temperature during oxidation. These results indicate that the properties of chars, including surface area, pore structure, and chemical composition, as well as reactor conditions strongly affect the ozone oxidation of chars.     

Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

Spin probe study of semi‐interpenetrating polymer networks based on polyurethane and polymethacrylate functional prepolymers

The motional transition and heterogeneity of semi‐interpenetrating networks (SIPNs) based on polyurethane (PU) with carboxylic groups and methacrylic copolymer (PM) with tertiary amine groups were studied by the electron spin resonance (ESR) spin probe method. The concentration of functional groups in both prepolymers varied from 0 to 0.45 mmol g^?1. Spin‐probed SIPNs show that the temperature‐dependent spectra are sensitive to polymer interactions imposed by functional groups. These interactions determine the free volume distribution in the matrix and temperature at which motional transition takes place. The fraction of free volume increases with functional group concentration and reaches its maximum at 0.25 mmol g^?1. Further increases in the functional group concentration reduce the free volume. The results of the networks with strong interactions are discussed in terms of the interference of the plasticizing effect of the PU component and the formation of possible cluster cross‐links, which restricts segmental motions. Copyright © 2003 Society of Chemical Industry