Economic growth,CO2 emissions,and energy consumption in the five ASEAN countries

This paper investigates the relationship between economic growth, carbon dioxide (CO₂) emissions, and energy consumption with an aim to test the validity of the Environmental Kuznets Curve (EKC) hypothesis in five ASEAN (Association of South East Asian Nations) countries (Indonesia, Malaysia, Philippines, Singapore, and Thailand) by applying the panel smooth transition regression (PSTR) model as a new econometric technique. The PSTR model is more flexible and appropriate for describing cross-country heterogeneity and time instability. Our empirical results strongly rejected the null hypothesis of linearity, and the test for no remaining nonlinearity indicated a model with one transition function and two threshold parameters. The first regime (levels of GDP per capita below 4686 USD) showed that environmental degradation increases with economic growth while the trend was reversed in the second regime (GDP per capita above 4686 USD). The results also showed that energy consumption with either the first or the second regime lead to increase CO₂. The overall results support the validity of the EKC hypothesis in the ASEAN countries.     

A Lattice Approach to Image Segmentation

After a formal definition of segmentation as the largest partition of the space according to a criterion σ and a function f, the notion of a morphological connection is reminded. It is used as an input to a central theorem of the paper (Theorem 8), that identifies segmentation with the connections that are based on connective criteria. Just as connections, the segmentations can then be regrouped by suprema and infima. The generality of the theorem makes it valid for functions from any space to any other one. Two propositions make precise the AND and OR combinations of connective criteria. The soundness of the approach is demonstrated by listing a series of segmentation techniques. One considers first the cases when the segmentation under study does not involve initial seeds. Various modes of regularity are discussed, which all derive from Lipschitz functions. A second category of examples involves the presence of seeds around which the partition of the space is organized. An overall proposition shows that these examples are a matter for the central theorem. Watershed and jump connection based segmentations illustrate this type of situation. The third and last category of examples deals with cases when the segmentation occurs in an indirect space, such as an histogram, and is then projected back on the actual space under study. The relationships between filtering and segmentation are then investigated. A theoretical chapter introduces and studies the two notions of a pulse opening and of a connected operator. The conditions under which a family of pulse openings can yield a connected filter are clarified. The ability of segmentations to generate pyramids, or hierarchies, is analyzed. A distinction is made between weak hierarchies where the partitions increase when going up in the pyramid, and the strong hierarchies where the various levels are structured as semi-groups, and particularly as granulometric semi-groups. The last section is based on one example, and goes back over the controversy about “lattice” versus “functional” optimization. The problem is now tackled via a case of colour segmentation, where the saturation serves as a cursor between luminance and hue. The emphasis is put on the difficulty of grouping the various necessary optimizations into a single one.     

Fast handoff with reducing waste rate approach for wireless resources management in UMTS mobile networks

3G Wideband CDMA systems adopt the Orthogonal Variable Spreading Factor code tree as the channelization codes management for achieving high data rate transmission in personal multimedia communications. It assigns a single channelization code for each accepted connection. Nevertheless, it wastes the system capacity when the required rate is not powers of two of the basic rate. One good solution is to assign multiple codes for each accepted connection but it causes two inevitable drawbacks: long handoff delay and new call setup delay due to high complexity of processing with multiple channelization codes, and high cost of using more number of rake combiners. Especially, long handoff delay may result in more call dropping probability and higher Grade of Service, which will degrade significantly the utilization and revenue of the 3G cellular systems. Therefore, we propose herein an adaptive efficient codes determination algorithm based on the Markov Decision Process analysis approach to reduce the waste rate and reassignments significantly while providing fast handoff. Numerical results demonstrate that the proposed approach yields several advantages, including the lowest GOS, the least waste rate, and the least number of reassignments. Meanwhile, the optimal number of rake combiners is also analyzed in this paper. This research was supported in part by the National Science Council of Taiwan, ROC, under contract NSC-93-2213-E-324-018.     

LEO卫星IP网中的低延时切换

提出了一种由覆盖全球的无星际链路的低轨(LEO)星座构成卫星IP网,首次提出了一种按信关站来划分网络的策略,并着重讨论了卫星IP网中的星间切换技术,提出用邻站广播技术来实现低延时切换的策略。仿真结果表明,本文提出的策略能大大减少信令交换量和降低切换延时,有效保障了卫星网中实时多媒体业务的QoS。     

CDMA系统的网络优化

CDMA技术已经成为下一代移动通信的主流技术，CDMA网络的建设也初具规模。移动网络的优化则是实际运营过程中的一个重要环节。文中试图反映CDMA网络优化的一般原理，阐述了CDMA网络优化时需要考虑的几个主要问题，介绍了优化时需要调整的一些关键参数。     

韶钢4号高炉顺行状况的操作技术

对韶钢炼铁厂4号高炉炉况和操作上存在的问题进行了分析,主要原因是原材料质量较差,精料水平低,同时,高炉操作不能完全适应原材料条件.按照上稳下活工艺的原则,采取合理鼓风动能、活跃炉缸工作状态、稳定热制度、合理中部冷却强度、炉顶小高压操作以及使用上部调节手段等一系列措施,使高炉的炉况顺行得到了较大的改善,各项主要技术经济指标取得相应的进步.2001年利用系数达3.024 t/m3·d,焦比达441 kg/t.     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

供水工程输水隧洞钻爆设计与施工

介绍了采用钻焊法开挖深圳市东部供水工程输水隧洞的掏槽方式，光面爆破参数，装药结构及钻爆作业安排等参数。在近4年的工程实践中，取得了良好的爆破效果和明显的经济效益。     

铵油炸药在炮孔爆破中的应用

文章介绍了在炮孔直径小于100mm条件下,尤其是光面和预裂爆破中,使用铵油炸药的体会及有关施工工艺.     

The smooth fractionator

A modification of the general fractionator sampling technique called the smooth fractionator is presented. It may be used in almost every situation in which sampling is performed from distinct items that are uniquely defined, often they are physically separated items or clusters like pieces, blocks, slabs, sections, etc. To each item is associated a ‘guesstimate’ or an associated variable with a more‐or‐less close – and possibly biased ? relationship to the content of the item. The smooth fractionator is systematic sampling among the items arranged according to the guesstimates in a unique, symmetric sequence with one peak and minimal jumps. The smooth fractionator is both very simple to implement and so efficient that it should probably always be used unless the natural sequence of the sampling items is equally smooth. So far, there is no theory for the prediction of the efficiency of smooth fractionator designs in general, and their properties are therefore illustrated with a range of real and simulated examples. At the cost of a slightly more elaborate sampling scheme, it is, however, always possible to obtain an unbiased estimate of the real precision and of some of the variance components. The only real practical problem for always obtaining a high precision with the smooth fractionator is specimen inhomogeneity, but that is detectable at almost no extra cost. With careful designs and for sample sizes of about 10, the sampling variation for the primary, smooth fractionator sampling step may in practice often be small enough to be ignored.