展成式精密电火花加工机床

研制了一种展成式精密电火花加工机床，它含有3个回转机构和4个直线移动机构，工件苡轴，工具电极苡轴和转台均可按需要回转，坐标工作台可作纵向和横向移动，工件头架可作轴向和竖向移动。可设置成多种复合运动方式和相应的结构布局，具有很丰富的加工功能，加工精度能达到微米级并实现电火花镜面加工。     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Diffusion Bonded EDM Electrode with Micro Holes for Jetting Dielectric Liquid

This paper describes improvement of machining characteristics of electrical discharge machining of deep slots using a tool electrode which has micro holes for jetting dielectric liquid over the working surface. The tool electrode was made by the diffusion bonding of two copper plates, over an interface on which micro grooves for jetting the dielectric fluid were formed using electrolyte jet machining. In conventional machining, it is difficult to drill micro holes at the end of a slim electrode and circulate the dielectric fluid from the other end. Hence a solid tool electrode is used and periodically lifted up during machining to flush debris particles out of the discharge gap. Use of the newly developed tool electrode was found to shorten the processing time and improve machining accuracy significantly compared with the conventional solid tool electrode. Since the holes are micro, the outlet shapes are not replicated onto the bottom surface of the slot machined.     

An investigation of ultrasonic-assisted electrical discharge machining in gas

This study focuses on using ultrasonic to improve the efficiency in electrical discharge machining (EDM) in gas medium. The new method is referred to as ultrasonic-assisted electrical discharge machining (UEDM). In the process of UEDM in gas, the tool electrode is a thin-walled pipe, the high-pressure gas medium is applied from inside, and the ultrasonic actuation is applied onto the workpiece. In our experiment, the workpiece material is AISI 1045 steel and the electrode material is copper. The experiment results indicate that (a) the Material Removal Rate (MRR) is increased with respect to the increase of the open voltage, the pulse duration, the amplitude of ultrasonic actuation, the discharge current, and the decrease of the wall thickness of electrode pipe; and (b) the surface roughness is increased with respect to the increase of the open voltage, the pulse duration, and the discharge current. Based on experimental results, a theoretical model to estimate the MRR and the surface roughness is developed.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

混粉电火花镜面加工技术及应用

利用自行研制的混粉电火花镜面加工装置，对混粉电火花镜面加工影响因素，加工表面性能等进行了深入研究，找出了粉末特性，工件材料，粉末浓度及放电参数等对混粉电火花镜面加工的影响规律，给出了合理的混粉电火花镜面加工工艺条件，以文中确定的加工工艺条件对铸造和压铸模具进行混粉电火花镜面加工，结果表明，该技术能提高模具制造质量，降低工人劳动强度，缩短模具制造周期。     

普通电火花成型机床加工小孔的改进方法

针对普通电火花成型机床在进行较深的小孔加工时存在的问题,对电火花成型机床进行部分改造,增加一个压力循环系统,使工具电极中喷出高压工作液,使之更适应小孔加工的条件.以DMKT132精密数控电火花成型机床的改造为实例,说明机床改造前后加工小孔的变化,结果表明,用该方法加工小孔,加工效率平均提高一倍以上,提高了加工质量,具有广泛的推广价值.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

基于有限状态机原理的数控电火花机床工件找正方法

提出了一种基于有限状态机原理的数控电火花机床工件找正方法：利用控制系统测量工件的2个基准边,得到它们的直线方程,通过直线方程的交点确定工件基准点（x0,y0）及一直线与机床X轴方向夹角θ,利用坐标平移和旋转,实现工件的定位找正。该方法可使工件快速定位,提高重定位效率和精度,对实现数控电火花机床的快速、高精度加工具有指导意义。     

多轴联动电火花加工数控系统实时技术研究

为了解决多轴联动电火花加工数控系统在开发过程中实时技术的处理问题,将RT-Linux技术应用于数控系统开发之中.将数控系统的体系结构宏观上分为实时部分和非实时部分两大部分,微观上分为用户管理模块、实时控制模块和驱动模块3大模块;构建3个模块中所有涉及到实时任务的部分,包括实时控制模块的构建,驱动模块的构建,用户管理模块和实时控制模块间通信方式的构建,实时控制模块和驱动模块间通信方式的构建;开发了五轴联动电火花加工数控系统,并应用于整体式涡轮盘加工实验,实验表明,整个系统实时性强,稳定、高效.