预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。     

硬质合金长条薄片弯曲变形的控制

从毛坯厚度差、装舟方式、冷却速度、舟皿涂料等方面分析了YG8和J12硬质合金长条薄片的弯曲变形原因,提出了几种抑制弯曲变形的措施。     

中国硬质合金工业现状及发展趋势

简要总结了中国硬质合金工业所取得的成就及与国外先进水平比较存在的差距,并对国内外硬质合金市场和技术发展趋势进行了分析。     

硬质合金工具和异型产品的发展战略探讨

根据硬质合金异型产品和工具市场分析以及江西省的具体情况，提出了江西发展硬质合金异型产品和工具的基础条件、重点产品选择、发展步骤。认为江西应重点发展硬质合金棒材和孔加工工具，快步引进世界最先进的生产线和技术，采取跳跃式的发展战略，赶上世界先进水平。     

湘潭新大粉末冶金设备制造有限公司的一体化真空烧结炉

简要介绍了湘潭新大粉末冶金设备制造有限公司研制的一体化真空烧结炉的炉子结构、脱蜡系统、工艺气体的引入系统、设备的控制系统以及炉子性能的鉴定结果。     

硬质合金与铁基复合材料热等静压扩散连接

以烧结结态硬质合金和粉末态铁基复合材料为连接对象，研究了两种材料的热等静压扩攻连接工艺，获得了直接连接接头和加镍作中间过渡层的间接连接接头，考察了接头的结合界面形貌，界面的元素扩散和界面结合强度。     

简述近期我国硬质合金工业发展趋势

介绍了2005年我国硬质合金行业基本情况,分析了近期行业发展趋势。     

关于硬质合金行业技改项目合同管理的思考

就硬质合金行业技改项目在实施过程开展有关合同管理的问题进行分析讨论,并提出应对措施,对搞好硬质合金行业技改项目合同管理工作具有现实意义。     

Effect of SiC nanowhisker addition on microstructure and mechanical properties of regenerated cemented carbides by low-pressure sintering

The hardness and toughness of regenerated cemented carbides, in general, are contradictory. Therefore, it is critical to explore regenerated cemented carbides with both high hardness and high toughness. In this study, regenerated WC-8-wt% Co cemented carbide with SiC nanowhisker were prepared by low-pressure sintering. The influence of SiCw contents on the microstructure and mechanical properties of regenerated WC-8-wt% Co cemented carbide was investigated. The results indicated that the hardness, density, flexural strength, and fracture toughness of regenerated cemented carbide first increased and then decreased with the addition of SiCw. The Vickers hardness, density, flexural strength, and fracture toughness could reach 1575 HV, 14.6 g/cm³, 2204 MPa, 16.85 MPa·m^1/2, respectively, with SiCw content 0.5 wt%, which were increased by 14.4%, 0.7%, 12.2%, and 17.3%, respectively, when compared with the regenerated cemented carbide without SiCw. The lowest friction coefficient and the best wear resistance could be also reached when 0.5-wt% SiCw was added. The fracture mechanism of the regenerated cemented carbide contained both transgranular and intergranular fracture through the microscopic observation of fracture surface via scanning electron microscope.     

Microstructure and properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering

In this study, WC-8Co cemented carbides were prepared by spark plasma sintering. When the samples sintered at 1300℃ were cooled to room temperature, the samples were sintered multiple times at 1250℃. The changes in microstructure and mechanical properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering were studied. The hardness of cemented carbides increased in the first two sintering, reaching 16.5 GPa. However, the hardness decreased seriously in the last two sintering. The attenuation rates of hardness were 6.2% and 2.5% due to the abnormal coarse grains. Furthermore, the crack path along the grain boundary was almost straight, causing a decrease in the indentation fracture toughness of cemented carbides. Additionally, the grains of cemented carbides were abnormally coarsened, and the morphologies of grains became unstable due to multiple sintering.