双贴合无光焦度校正板在主反射镜前的两镜系统的像差特性

在光学系统中特别是反射系统中经常通过加无光焦度校正板来减少或消除其他元件所产生的像差。讨论了双贴合无光焦度校正板放在主镜前的双反射球面系统，根据像差理论分析了消像差的条件，研究了系统中各种参数的变化对系统高级残余像差的影响。结果表明主镜的相对孔径越大，系统的残余像差增加；正透镜在前的校正板结构优于负透镜在前的结构；选择合适的校正板单透镜的光焦度，可使系统的高级残余像差最小。     

快速纳秒响应二代近贴聚焦像增强器的批量生产

叙述了二代近贴聚焦像增强器批量生产所用真空设备性能及特点，同时给出了管子工艺考核结果及管子纳秒时间响应特性。工艺考核结果表明，制管工艺可靠、性能稳定，管子批量生产合格率大于70％。     

火炮身管内表面激光硬化处理的实验研究

提高身管寿命是火炮行业亟待解决的关键技术问题，激光表面改性技术是解决这一问题的有效方法之一。本文在分析激光表面相变硬化性能的基础上，对身管内表面进行了激光硬化处理实验研究，检测了其内表面阳线和阴线的硬化层硬度和深度，对比分析了离焦量和焦深对其内表面硬化层硬度的影响，并对激光相变硬化层金相组织进行了分析。经激光硬化处理后，身管的内表面硬度有明显提高，硬化层较深，且为很细的条状马氏体组织。     

一类广义几何序列的相关函数

计算序列的周期相关函数是一个很困难但又十分重要的问题。本文首次给出了线性相关广义几何序列的相关函数，从而部分地解决了Ｋｌａｐｐｅｒ提出的相关函数计算问题。     

Factive Presuppositions, Accommodation and Information Structure

There are three ways to refer to a fact from the complement of afactive verb: (1) Via abstract object anaphoric reference, or, witha full sentential complement that will be interpreted either (2) asa bound presupposition or (3) as triggering a presupposition of afact that will have to be accommodated. Spoken corpus examplesreveal that these three possibilities differ in relation to thetype of information they tend to contribute, and this has twoeffects. First, the information status of the fact and its role inthe discourse seem to affect the preference for one constructionover another in a particular context. Second, presupposed factivecomplements that need to be accommodated tend to be hearer-new andthe focus of the utterance, meaning that information structureseems to contribute to the felicity of accommodation ofpresupposed facts.     

An eight‐node hybrid‐stress solid‐shell element for geometric non‐linear analysis of elastic shells

This paper presents eight‐node solid‐shell elements for geometric non‐linear analysis of elastic shells. To subdue shear, trapezoidal and thickness locking, the assumed natural strain method and an ad hoc modified generalized laminate stiffness matrix are employed. A selectively reduced integrated element is formulated with its membrane and bending shear strain components taken to be constant and equal to the ones evaluated at the element centroid. With the generalized stresses arising from the modified generalized laminate stiffness matrix assumed to be independent from the ones obtained from the displacement, an extended Hellinger–Reissner functional can be derived. By choosing the assumed generalized stresses similar to the assumed stresses of a previous solid element, a hybrid‐stress solid‐shell element is formulated. Commonly employed geometric non‐linear homogeneous and laminated shell problems are attempted and our results are close to those of other state‐of‐the‐art elements. Moreover, the hybrid‐stress element converges more readily than the selectively reduced integrated element in all benchmark problems. Copyright © 2002 John Wiley & Sons, Ltd.     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

胜利701气枪震源船改造设计

阐述胜利701气枪震源船震源系统的改造设计。改造设计使胜利701船达到了Ⅱ类航区海船的规范要求，满足了海上三维勘探和高分辨勘探的发展需要，为以后类似船舶的改造提供了经验。     

Projection center calibration by motion

Camera calibration is the first step of three-dimensional machine vision. A fundamental parameter to be calibrated is the position of the camera projection center with respect to the image plane. This paper presents a method for the computation of the projection center position using images of a translating rigid object, taken by the camera itself.

Many works have been proposed in literature to solve the calibration problem, but this method has several desirable features. The projection center position is computed directly, independently of all other camera parameters. The dimensions and position of the object used for calibration can be completely unknown.

This method is based on a geometric relation between the projection center and the focus of expansion. The use of this property enables the problem to be split into two parts. First a suitable number of focuses of expansion are computed from the images of the translating object. Then the focuses of expansion are taken as landmarks to build a spatial back triangulation problem, the solution of which gives the projection center position.