高温高压管道焊接坡口选择及焊条用量计算

从经济和技术角度分析火电厂高温高压管道焊缝宜采用的坡口形式,并对各种坡口形式的焊条用量估算推导出经验公式.     

基于机器视觉辅助测量的精密电火花刻伤方法与系统

传统电火花刻伤机在工作时只对电机动作进行反馈,刀片损耗带来的误差通常靠人为增加进给量进行补偿,难以保证刻槽的形状与尺寸公差。为了更精确地获得刻伤过程中的刀片损耗量,提升闭环控制的电机精度,提出了一种基于机器视觉辅助测量刀片损耗的电火花刻伤方法,并依此设计了一套刻伤系统。实验中使用该系统计算出的刀片损耗量和实际测量值的误差在±5μm以内,同时得到的刻槽实际测量深度与系统计算的刻槽深度的误差在±10μm内。     

基于CFD的新型结构静压油垫数值仿真技术

为了提高重载数控机床静压转台的承载能力和油膜刚度,提出了一种具有多环形流道油腔和阻尼型封油边结构的新型静压油垫,并对其性能进行了研究.在对静压油垫结构优化设计的基础上,利用CFD(computationalfluid dynamics)数值仿真技术,采用二维轴对称流动模型对新型结构静压油垫的流场特性进行了仿真分析,得到了新型静压油垫的内部流场特性,计算出油垫的承载能力和油膜刚度,并与单腔体、单平面封油边结构的静压油垫进行了对比.研究表明:新型静压油垫能通过在阻尼流道和阻尼槽内形成紊流,增加流动液阻,实现压力增益,并可在阻尼槽处产生局部静压效应,从而使新型结构静压油垫的承载能力和油膜刚度较传统结构静压油垫有所提高;此外,采用CFD技术有助于对复杂结构的静压油垫进行优化设计与性能计算,从而提高设计效率和计算准确性.     

The role of grain boundary energy in grain boundary complexion transitions

Recent findings about the role of the grain boundary energy in complexion transitions are reviewed. Grain boundary energy distributions are most commonly evaluated using measurements of grain boundary thermal grooves. The measurements demonstrate that when a stable high temperature complexion co-exists with a metastable low temperature complexion, the stable complexion has a lower energy. It has also been found that the changes in the grain boundary energy lead to changes in the grain boundary character distribution. Finally, recent experimental observations are consistent with the theoretical prediction that higher energy grain boundaries transform at lower temperatures than relatively lower energy grain boundaries. To better control microstructures developed through grain growth, it is necessary to learn more about the mechanism and kinetics of complexion transitions.     

Tribological performance of UV picosecond laser multi-scale composite textures for C/SiC mechanical seals: Theoretical analysis and experimental verification

The performance of mechanical seals can be improved by using multi-scale composite textures with spiral grooves and micro-dimples, but without a clear texture function mechanism, it is difficult to optimize the textures on the sealing surface. This research established a mathematical model based on the mass-conservative JFO cavitation boundary to analyze the mechanical seal performance of multi-scale composite micro-textures. We use the multi-grid method for numerical solutions, investigate the hydrodynamic lubrication characteristics of composite-textured mechanical seals, and inspect the coupling effect of micro-dimples and spiral grooves. We also analyzed the influence of the geometrical parameters of composite textures on the sealing performance and optimized the sealing surface textures using theoretical analysis. The numerical analysis showed that the multi-scale composite-textured mechanical seal produced a coupling effect between the micro-dimples and spiral grooves, which improved the lubrication of the sealing pair. Eventually, C/SiC mechanical seal bench tests confirmed the tribological improvement of composite textures compared with the un-textured seal under various sealing liquid pressures and rotation speeds. Through comparing the Stribeck curve, the multi-scale composite textured C/SiC mechanical seals have a lower and more stable friction torque than the un-textured.     

一种新型的X波段圆极化微带天线

该文采用双层方形贴片开对角槽的结构设计了一种新型的应用于X波段的圆极化微带贴片天线。通过仿真优化,天线轴比<3dB的带宽480 MHz,增益达到6.29dB,反射系数s11<-10dB的相对阻抗带宽达到6.6%,天线具有良好的圆极化和阻抗匹配特性。     

带缺口的焊丝拉拔试验及有限元分析

对带缺口的活性无镀铜焊丝的变形趋势进行试验和有限元分析,解决金属在拉拔过程中自接触的算法问题。得出带有纵向U型缺口焊丝添加活性剂的效果最好,纵向V型缺口次之,横向U型缺口添加活性剂的效果最差。并对带缺口的焊丝进行拉拔试验,验证有限元分析的正确性,同时对焊丝截面进行扫描电镜能谱分析,得出闭合后的凹槽内部确实含有拉拔前涂覆的活性剂中的Se元素。     

多环形槽结构磁流变阻尼器的实验建模

对自行设计的、多环形槽结构磁流变阻尼器进行了理论分析与实验建模.该阻尼器的主要特点是在阻尼活塞周向表面上开有若干个矩形齿状环形槽,并且通过磁路设计,使流经阻尼通道处的磁流变液流动方向与其作用的磁力线方向垂直,用以增大阻尼力和阻尼力变化范围.然后从磁流变液的流变特性、电磁学的角度出发,利用修正了的非牛顿流体宾汉模型、结合实验数据,建立了该阻尼器的力学模型.利用该模型绘制和分析了外加磁场(通过施加电流实现)和阻尼力之间关系曲线,与实验结果较好吻合,从而证明了模型的正确性,为磁流变液阻尼器设计和性能预测提供了参考.     

The aspect ratio of surface grooves and metastable pitting of stainless steel

The metastable pitting behavior of 316L stainless steel with different surface roughness in 0.01 M NaCl solution was studied using potentiostatic and potentiodynamic polarization methods and statistical treatments. As surface roughness decreased, the nucleation rate of metastable pits decreased. The peak current of metastable pits also decreased, but the average growth rate of metastable pits showed a slight increase. The aspect ratio of surface groove, w/d, was suggested to characterize the openness of surface grooves, in which w is the width of the groove at the opening and d the depth of the groove. Bigger w/d value indicates more smooth surface, and it is more difficult for micro-pit to nucleate. Under certain conditions of solution and potential, there is a critical w/d value. Metastable pits may nucleate only on those surfaces whose w/d values are less than the critical value. As the aspect ratio w/d increases, the nucleation rate of metastable pits decreases linearly, and both metastable pitting potential E_m and pitting potential E_p move in the positive direction.     

Flow-induced voltage generation over monolayer graphene in the presence of herringbone grooves

While flow-induced voltage over a graphene layer has been reported, its origin remains unclear. In our previous study, we suggested different mechanisms for different experimental configurations: phonon dragging effect for the parallel alignment and an enhanced out-of-plane phonon mode for the perpendicular alignment (Appl. Phys. Lett. 102:063116, 2011). In order to further examine the origin of flow-induced voltage, we introduced a transverse flow component by integrating staggered herringbone grooves in the microchannel. We found that the flow-induced voltage decreased significantly in the presence of herringbone grooves in both parallel and perpendicular alignments. These results support our previous interpretation.