On the linear correlation between microhardness and mechanical properties in polar polymers and blends

The tensile elastic modulus (E), yield stress (σ_Y) and microhardness (MH) of neat and binary and ternary blends of glassy semicrystalline ethylene–vinyl alcohol copolymer (EVOH), a glassy amorphous polyamide and a semicrystalline nylon‐containing ionomer covering a broad range of properties were examined. The tests were carried out on dry and water‐equilibrated samples to produce stiffer and softer materials, respectively. From the results, more accurate linear correlations were found to describe adequately the microhardness, modulus and yield stress of these strongly self‐associated polymers through hydrogen bonding. Copyright © 2003 Society of Chemical Industry     

激光熔敷合金层组织及腐蚀磨损特性研究

利用ＣＯ＿２连续激光器在４５钢表面进行了激光熔敷镍基合金、镍基Ｃｒ＿２Ｏ＿３合金和镍基ＷＣ合金，以２Ｃｒ１３不锈钢为对比材料，系统地研究了激光熔敷层在不同冲击速度和腐蚀介质浓度下的腐蚀磨损特性，并根据组织分析、显微硬度测试及腐蚀磨损后的表面形貌观察，探讨了激光熔敷层的腐蚀磨损过程。结果表明：激光熔敷层的腐蚀磨损性能均比２Ｃｒ１３不锈钢好。     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

Studies on thermal fatigue in 3Cr2W8V die steel by positron lifetime and hardness measurements

Studies on thermal fatigue in 3Cr2W8V die steel have been carried out by using positron lifetime and microhardness measurements. It is found that the mean positron lifetime and the microhardness exhibit periodic up-and-down variations with an increase in the number of fatigue cycles. The experiments indicate that in the process of thermal fatigue there are two opposing effects on variation of defects: microdeformation and dynamic recovery and recrystallization.     

On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The internal-nitriding behavior of 310 stainless steel with and without Al and Ti additions

The internal-nitriding behavior in ammonia-hydrogen atmospheres of type-310 stainless steel and 310 to which either 2 wt.% Ti or 3 wt.% Al were added was studied over the range of 550–950°C. An Fe-24Cr binary alloy was included to assess the role of a BCC crystal structure vs the FCC crystal structure of 310 stainless steel. The BCC alloy exhibited the most rapid kinetics as expected. X-ray diffraction showed only the presence of CrN in all the alloys up to 735°C. At 850°C and above, both CrN and Cr₂N were detected. The nonformation of TiN and AlN at lower temperatures is attributed to nucleation problems. Precipitates were extremely fine (unresolvable even at 20,000×) at 563°C and became much coarser with increasing temperature. The precipitate density, size, and shape varied across the internal-nitriding zone at the higher temperatures. External scaling was noted at 850°C and above, however, it was not a continuous film. The activation energy of internal nitriding from 563–735°C ranged from 3.8 kcal/mol for 310+2Ti to 18.2 kcal/mol for 310+3Al; from 850–950°C, the activation energy ranged from 44 (310+2Ti) to 56.6 kcal/mol (310+3Al). Microhardness profiles show that an intermediate zone exists between the nitride case and the base metal. The origin of this zone is discussed.     

不饱和聚酯树脂光固化工艺的研究-光引发剂浓度

本文选用TPO、651两种光引发剂，分别配制引发剂浓度为0．25、0．5、1、2wt％的不饱和聚酯体系。通过测定光固化试样的显微硬度分析光引发剂浓度对固化程度的影响。结果表明，提高引发剂浓度能抑制氧阻聚的作用，但对于较厚的试样，引发剂浓度过高会导致固化不完全。     

Solid phase compaction of polymeric powders: effects of compaction conditions on pressure and density variations

In a recent communication it was shown that the pressure losses during the solid phase compaction of a polymeric powder could be predicted from a simple relationship of the form:

$\text{P}{}_2\text{P}{}_1\text{=(K)}{}^{\mathrm{<mtext>h</mtext><mtext>d</mtext>}}$

where $\text{h}\text{D}$ is a function of the geometry of the compact. This has now been explored in more detail and it has been found that for PVdC and PVC the factor K is dependent on the rate of compaction and the die surface finish but is independent of compaction pressure and die diameter. To illustrate the effect of the pressure losses on the structural uniformity of the compacts, microhardness measurements were taken at a large number of points across a section of each sample. A computer plot of hardness contours provided a picture of the homogeneity of the sample which could be related to the compaction conditions and average density of the compact.     

Ni—P—Si3N4化学复合镀层性能测试

对Ｎｉ－Ｐ－Ｓｉ３Ｎ４复合镀层的显微硬工、耐磨性及结合强度进行了测试。结果表明：化学沉积Ｎｉ－Ｐ－Ｓｉ３Ｎ４合金是一种值得推广应用的新耐磨镀层。