氮掺杂TiO_2中空复合微球的制备及可见光光催化性能

为了提高TiO2的可见光光催化性能,以微米级聚苯乙烯微球为模板,钛酸四丁酯为前驱体,三乙胺为氮源,采用静电吸附自组装法制备了粒径为1.20μm、壳层的厚度约为30nm且球形形貌良好的氮掺杂TiO2中空复合微球,采用SEM、XPS、XRD和紫外-可见分光光度计研究了其结构及光催化性能。结果表明:氮进入TiO2晶格内取代了部分O并改变了晶格中Ti和O的化学状态,但对TiO2晶型结构没有明显影响;氮掺杂后的TiO2中空复合微球禁带宽度变窄,氮掺杂TiO2中空复合微球不仅在紫外区有较强的光吸收能力,在可见光区也表现出较强的光响应性,对甲基橙的光催化降解率较Degussa P25型纳米TiO2的明显增强。研究结果对TiO2在光催化领域的应用具有理论指导意义。     

Room-temperature hydrogenation of halogenated nitrobenzenes over metal–organic-framework-derived ultra-dispersed Ni stabilized by N-doped carbon nanoneedles

Ultra-dispersed Ni nanoparticles (7.5 nm) on nitrogen-doped carbon nanoneedles (Ni@NCNs) were prepared by simple pyrolysis of Ni-based metal–organic-framework for selective hydrogenation of halogenated nitrobenzenes to corresponding anilines. Two different crystallization methods (stirring and static) were compared and the optimal pyrolysis temperature was explored. Ni@NCNs were systematically characterized by wide analytical techniques. In the hydrogenation of p-chloronitrobenzene, Ni@NCNs-600 (pyrolyzed at 600 °C) exhibited extraordinarily high performance with 77.9 h^–1 catalytic productivity and > 99% p-chloroaniline selectivity at full p-chloronitrobenzene conversion under mild conditions (90 °C, 1.5 MPa H₂), showing obvious superiority compared with reported Ni-based catalysts. Notably, the reaction smoothly proceeded at room temperature with full conversion and > 99% selectivity. Moreover, Ni@NCNs-600 afforded good tolerance to various nitroarenes substituted by sensitive groups (halogen, nitrile, keto, carboxylic, etc.), and could be easily recycled by magnetic separation and reused for 5 times without deactivation. The adsorption tests showed that the preferential adsorption of –NO₂ on the catalyst can restrain the dehalogenation of p-chloronitrobenzene, thus achieving high p-chloroaniline selectivity. While the high activity can be attributed to high Ni dispersion, special morphology, and rich pore structure of the catalyst.     

基于氮掺杂碳纳米颗粒荧光猝灭-恢复方法检测还原型谷胱甘肽

分别以海藻酸钠和色氨酸为碳源和氮源,采用固相法一步合成出了量子产率为47.9%的氮掺杂荧光碳纳米颗粒(N-CNPs)。根据铜离子存在的条件下,N-CNPs荧光强度的恢复情况与还原型谷胱甘肽浓度成正比的关系,建立基于N-CNPs检测还原型谷胱甘肽的新方法。优化了溶液pH及反应时间等条件。在pH 6.0、铜离子浓度30μmol/L条件下,谷胱甘肽在0.2~45μmol/L浓度范围内与N-CNPs荧光恢复强度呈良好的线性关系,检出限为50 nmol/L。方法具有灵敏度高、选择性好、操作简单等优点,可用于实际样品中谷胱甘肽的检测。     

微波法制备具有可见光活性的氮掺杂二氧化钛

采用乙二醇作为溶剂，脲为氮源，用微波法制备了氮掺杂的二氧化钛纳米催化剂。采用傅立叶变换红外（FTIR），波长色散谱（WDS），X射线衍射（XRD），X射线光电子能谱（XPS）等对样品的化学组成以及表面基团进行了表征和分析。在模拟太阳光和可见光的条件下对甲基橙进行光催化降解评价，结果表明该催化剂在没有降低二氧化钛紫外区活性的同时具有较高可见光催化活性。     

膨润土负载氮掺杂TiO2光催化剂制备及性能研究

以钛酸四丁酯和氨水为原料,膨润土为载体,采用溶胶-凝胶法制备了膨润土负载掺氮TiO2光催化剂.并利用IR对光催化剂组织结构进行袁征.在可见光下考察了焙烧温度、光催化时间、光催化剂用量、酸度等因素对光催化剂降解亚甲基蓝废水性能的影响.实验结果表明:450℃下焙烧所得的催化剂,用量为1.2 g/L,在碱性条件下常温光照20...     

微管在6H-SiC单晶生长过程中的演化

采用升华法生长调制掺氮的6H-SiC单晶,其[0001]方向纵切片的掺氮条纹表明,晶体的生长前沿由初始生长阶段的凸形逐渐变成了后续生长阶段近似平坦的形状。发现近似平坦的生长前沿有利于单晶质量的提高。透射光学显微镜观察发现,若微管的延伸方向与6H-SiC晶体的[0001]方向偏离角度较大时,微管变得不稳定而离解消失;微管也可终止于六边形空洞或硅滴处。氮元素掺杂可使6H-SiC晶体的晶格发生畸变,可导致产生新微管。     

具有可见光活性的纳米掺氮TiO2制备和表征

用硫酸钛与氨水反应得到TiO2前体,煅烧后制得掺氮TiO2粉体,研究不同反应条件和不同温度下掺氮TiO2的吸光特性和形态结构,结果表明掺氮TiO2在400℃：下加热1h,所得粉体是锐钛矿相结构,粒径约15nm,与未掺杂TiO2相比,吸收边红移22nm,对400-510nm的可见光有一定的吸收率,可见光下对甲基橙的降解表明具有可见光活性。     

Scalable Production of Wearable Solid-State Li-Ion Capacitors from N-Doped Hierarchical Carbon

Smart and wearable electronics have aroused substantial demand for flexible portable power sources, but it remains a large challenge to realize scalable production of wearable batteries/supercapacitors with high electrochemical performance and remarkable flexibility simultaneously. Here, a scalable approach is developed to prepare wearable solid-state lithium-ion capacitors (LICs) with superior performance enabled by synergetic engineering from materials to device architecture. Nitrogen-doped hierarchical carbon (HC) composed of 1D carbon nanofibers welded with 2D carbon nanosheets is synthesized via a unique self-propagating high-temperature synthesis (SHS) technique, which exhibits superior electrochemical performance. Subsequently, inspired by origami, here, wave-shaped LIC punch-cells based on the above materials are designed by employing a compatible and scalable post-imprint technology. Finite elemental analysis (FEA) confirms that the bending stress of the punch-cell can be offset effectively, benefiting from the wave architecture. The wearable solid-state LIC punch-cell exhibits large energy density, long cyclic stability, and superior flexibility. This study demonstrates great promise for scalable fabrication of wearable energy-storage systems.     

A molecularly imprinted electrochemical sensor based on a MoS2/peanut shell carbon complex coated with AuNPs and nitrogen-doped carbon dots for selective and rapid detection of benzo(a)pyrene

In this study, a new electrochemical strategy based on the fabrication of a molecularly imprinted sensor onto a MoS₂-loaded peanut shell carbon complex with gold nanoparticles (AuNPs) and nitrogen-doped carbon dots (N-CDs) was proposed for the detection of benzo(a)pyrene (BaP). Molecularly imprinted polymer (MIP) films were prepared by cyclic voltammetry (CV) using 2-mercaptobenzimidazole (2-MBI) as a functional monomer in the presence of BaP. The surface morphologies, structural characteristics and electrochemical properties of the obtained MIP/AuNPs/N-CDs/PSBC/MoS₂/GCE were investigated via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectrometry (EDS), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), UV–Vis spectrometry, fluorescence spectrometry, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimised conditions, the detection range of the electrode towards BaP varied from 5 nM to 20 μM with a detection limit of 1.5 nM. The prepared electrochemical sensor also exhibited good stability, relevant reproducibility and high selectivity. The application of the sensor in the actual analysis of edible oil samples showed promising results, thereby being relevant as a biomimetic sensing platform for the detection of chemical hazards in food and environment.     

具有近红外吸收的二维/三维ZnIn2S4/氮掺杂石墨烯光催化剂的制备及其高效CO2捕获和光催化还原性能（英文）

具有宽光谱太阳能利用的分等级异质结光催化剂,正成为一种新兴的先进光催化材料,被应用于太阳能驱动二氧化碳转化为高附加值的化学原料.本工作通过水热法使二维硫化铟锌纳米墙垂直生长于三维氮掺杂石墨烯泡沫上,形成分等级异质结光催化剂.该催化剂展现出优异的光热转换效率、选择性捕获CO2和光催化还原CO2的能力.在273 K和1个大气压条件下,负载1 wt%氮掺杂石墨烯泡沫的复合催化剂表现出最优异的性能,其中对CO2和N2的吸附选择性为30.1,并且对CO2的等量吸附热为48.2 kJ mol^-1.在无助催化剂和牺牲剂的条件下,负载1 wt%氮掺杂石墨烯泡沫的复合催化剂,其光催化转化CO2为CH4、CO和CH3OH的效率分别是纯的硫化铟锌的9.1、3.5和5.9倍.该增强效应得益于三维石墨烯泡沫高度开放的网状结构,良好的CO2吸附能力和两种组份之间的强相互作用.此外,利用原位照射X射线光电子能谱仪和开尔文探针技术分析了电荷转移的方向,本工作为设计高效太阳能转化分等级异质结光催化剂开辟了新的思路.