Abrasive waterjet micro-machining of channels in metals: Comparison between machining in air and submerged in water

Abrasive water jet technology can be used for micro-milling using recently developed miniaturized nozzles. Abrasive water jet (AWJ) machining is often used with both the nozzle tip and workpiece submerged in water to reduce noise and contain debris. This paper compares the performance of submerged and unsubmerged abrasive water jet micro-milling of channels in 316L stainless steel and 6061-T6 aluminum at various nozzle angles and standoff distances. The effect of submergence on the diameter and effective footprint of AWJ erosion footprints was measured and compared. It was found that the centerline erosion rate decreased with channel depth due to the spreading of the jet as the effective standoff distance increased, and because of the growing effect of stagnation as the channel became deeper. The erosive jet spread over a larger effective footprint in air than in water, since particles on the jet periphery were slowed much more quickly in water due to increased drag. As a result, the width of a channel machined in air was wider than that in water. Moreover, it was observed that the instantaneous erosion rate decreased with channel depth, and that this decrease was a function only of the channel cross-sectional geometry, being independent of the type of metal, the jet angle, the standoff distance, and regardless of whether the jet was submerged or in air, in either the forward or backward directions. It is shown that submerged AWJM results in narrower features than those produced while machining in air, without a decrease in centerline etch rate.     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.     

LW-601喷水织机长丝织物松紧档疵点的成因及对策

松紧档疵点是喷水织机长丝织物织造过程中常见病疵之一。通过分析LW -60 1喷水织机的送经和卷取装置的工作原理 ,从机械调整与维护、生产过程管理及工艺优化等方面探讨了其产生的原因 ,并针对性提出了实用对策     

Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

一种外置式视频同步信号发生器的设计

对随机视频信号的特点进行了研究，提出了采用谱分析提取随机视频信号的同步频率的方法，根据数据传输的要求设计了基于USB接口的外置式视频同步信号发生器并给出了系统的硬件框图和软件流程。系统具有自动分析随机视频信息隐含的同步信号频率，精确产生同步脉冲信号的特点，满足随机视频信号采集和稳定显示的同步要求。同步精度达到300帧内图像漂移小于1个像素。利用该视频同步信号发生器控制非标准图像采集卡实现了计算机辐射的随机视频信号的采集和稳定显示。     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

复印粉的粉碎分级技术

本文介绍了利用国产气流粉碎机和余气萃取分级制备复印粉的实用技术，并展示了粉碎分级系统和复印粉的电镜照片。     

NUMERICAL SIMULATIONS OF WHOLE FIELD BEHAVIOR FOR ROUND BUOYANT JET

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＳＯＦＷＨＯＬＥＦＩＥＬＤＢＥＨＡＶＩＯＲＦＯＲＲＯＵＮＤＢＵＯＹＡＮＴＪＥＴＬｉＷｅｉ，ＨｕａｉＷｅｎ－ｘｉｎ（ＷｕｈａｎＵｎｉｖｅｒｓｉｔｙｏｆＨｙｄｒａｕｌｉｃａｎｄＥｌｅｃｔｒｉｃＥｎｇｉｎｅｅｒｉｎｇ，...     

原料扩重的中压加氢改质装置投产

介绍燕山石化公司为扩大1Mt／a中压加氢改质装置的原料来源，改用大庆减二线油和重油催化裂化柴油组成的混合料开工投产的经验以及装置初期的运行条件。中压加氢改质技术可以生产优质柴油和蒸汽裂解制乙烯的原料，还可增产喷气燃料。