Influence ofAmaranthus hybridus L. allelochemics on oviposition behavior ofSpodoptera exigua andS. eridania (Lepidoptera: Noctuidae)

Common pigweed,Amaranthus hybridus L., is a favorite host of the beet army worm (BAW),Spodoptera exigua L. Chemicals extracted from homogenized pigweed with distilled water, ethanol, or dichloromethane and sprayed back on pigweed deterred oviposition by the BAW. Similarly, water extracts of frass from conspecific larvae or southern armyworm (SAW) larvae,S. eridania (Cramer), fed pigweed leaves and sprayed back on pigweed plants also deterred BAW oviposition, thus confirming that deterrence was due to plant allelochemics rather than specific compounds associated with the metabolic or excretory products of the larvae. Confirmation of the presence of oviposition-deterring chemicals in pigweed was used to explain a previously observed seasonal displacement of BAW by SAW on pigweed in the field.Mention of a commercial or proprietary product does not constitute an endorsement by the USDA.     

Viscoelasticity of oxidized starch/low methoxy pectin mixtures in the presence of glucose syrup

The structural properties of mixtures of pectin, oxidized starch and glucose syrup were investigated using small deformation dynamic oscillation. In the absence of added calcium, preparations of low methoxy pectin with glucose syrup formed viscous solutions, which remained crystal-free at subzero temperatures. Samples of oxidized starch and glucose syrup, on the other hand, exhibited solid-like behaviour because of the crystalline nature of the amylose-like helices. Mixtures of the two polysaccharides with the co-solute clearly showed phase inversion from liquid to solid-like behaviour with increasing amounts of starch in the formulation. The transformation was reflected in the textural properties of samples, which varied from thick solutions to firm gels. The viscoelasticity of the system was modified further by the introduction of high methoxy pectin. Preparations of high methoxy pectin and glucose syrup formed rubbery gels whose amorphous nature underwent a glass transition during cooling.     

Kinetic modelling of textural changes in ready-to-eat breakfast cereals during soaking in semi-skimmed milk

Summary Ready‐to‐eat breakfast cereals immersed in milk undergo undesirable changes in texture because of sudden moisture uptake. The textural changes are ascribable to a plasticizing effect of water, which modifies the mechanical strength of products by softening the starch/protein matrix. In this work, some textural parameters of different cereal flakes were derived from the force–displacement curves monitored during 300 s of immersion in milk. Hardness loss, deformability increment and changes in the force–displacement curve profile were calculated and plotted against soaking time. The application of a sugar coating process to a model cereal flake increased the initial product hardness and improved the preservation of the textural parameters during immersion. The Peleg model closely fitted the experimental data, with regression coefficients from 0.967 to 0.999.     

The composition and microbial quality of pre-packed dates purchased in Greater Glasgow

Composition and microbiological contamination was measured in samples of pre-packed dates purchased from a number of stores and retail outlets in Greater Glasgow. The sugar content of dried pitted dates was c . 74%, about 10% more than reported on those packs where nutritional information was given. Potentially pathogenic bacteria like Escherichia coli, Staphylococcus aureus and Bacillus cereus were identified in some of the samples together with lactic acid bacteria, yeasts and moulds, Aspergillus flavus and A. parasiticus . Fresh dates were the most heavily contaminated of all samples, probably owing to the high moisture content.     

Biological Effects of Flammulina Velutipes Richin RE on Chinese Kunming Mice

ＢｉｏｌｏｇｉｃａｌＥｆｆｅｃｔｓｏｆＦｌａｍｍｕｌｉｎａＶｅｌｕｔｉｐｅｓＲｉｃｈｉｎＲＥｏｎＣｈｉｎｅｓｅＫｕｎｍｉｎｇＭｉｃｅＬｉａｎｇＤｉｎｇｂａｎｇ（梁定邦）；ＣｕｉＤｅｆａｎｇ（崔德芳）；ＺｈａｎｇＪｉｎｔｏｎｇ（张金桐）（Ｄｅｐａｒｔｍ...     

Enzymatic Synthesis of Glucose- and Xylose Laurate Esters Using Different Acyl Donors,Higher Substrate Concentrations,and Membrane Assisted Solvent Recovery

Glucose- and xylose laurate esters are enzymatically synthesized using equimolar substrate concentrations in 2-methyl-2-butanol, comparing free lauric acid with methyl- and vinyl-laurate as acyl donors. All reactions result in ≥70% acyl donor conversions after 72 h but the activated donors are also partially hydrolyzed to lauric acid, highlighting the difficulty in controlling water presence in this particular reaction system. The esterification of xylose generates a complex product profile, with several regioisomers of monoesters and diesters. The esterification of glucose is quite selective, forming mainly the 6-O monoester (≥96%) with a small presence of two diester isomers (4%). Increasing substrate concentration up to 800 millimoles kg⁻¹ results in lower conversion values (down to 58%) but shows that the reaction proceeds successfully even in the presence of high amounts of insoluble glucose. However, the reaction is less selective and the proportion of diester increases, becoming up to 46% (molar fraction) of the final product. Solvent recovery after esterification can be achieved by organic solvent nanofiltration through a polymeric membrane able to retain ≥80% of all reaction substrates and products. Practical Applications: The use of high substrate concentrations during the enzymatic synthesis of sugar ester biosurfactants leads to product titers that are more industrially appealing, without the need to find a solvent that can solubilize all initial substrate. The sustainability of the enzymatic conversion at mild temperatures can be enhanced by recycling of the reaction solvent through organic solvent nanofiltration, an energy efficient alternative to other traditional methods like distillation.     

Synthesis and characterization of maltose fatty acid monoesters as biosurfactants

Maltose long-chain fatty acid esters (MFAE), esterified at the 6 and 6′ position, were synthesized with stearic, palmitic, myristic, and oleic groups. Synthesis yields were 15–20% based on initial maltose present, and structural confirmation was obtained using plasma desorption mass spectrometry and nuclear magnetic resonance spectroscopy. These surfactants have surface tensions in the range of 34–36 dyn/cm at their critical micelle concentrations (CMC) of approximately 10⁻⁵–10⁻⁶ mol/L. The increased chain lengths have a marked effect, reducing CMC values for MFAE by approximately three orders of magnitude over similar carbohydrate-based dodecyl chain sources. Within chain lengths between 14 and 18 carbons, the rate of change in CMC is significant and decreases with increasing chain length for MFAE. The melting points of MFAE are approximately 40°C, and the heat capacities range from 1.6 to 1.9 J/g·K. These numbers are comparable to those of sucrose esters, indicating their applicability in similar uses. However, because MFAE, unlike sucrose, possess an anomeric carbohydrate carbon position, these surfactants maintain their reducing nature and are susceptible to further derivatization. They are also synthesized from renewable, economical carbohydrates and lipids and may provide an excellent alternative to pertrochemical-derived products.     

The influence of food emulsifiers on fat and sugar dispersions in oils. III. Water content,purity of oils

The influence of water on the interactions between fat and sugar crystals dispersed in triglyceride (vegetable) oils was qualitatively estimated from sedimentation and rheological experiments. The experiments were performed both with and without food emulsifiers (monoglycerides and lecithins) present in the oil. The effects of minor natural oil components (nontriglycerides) on the interactions and on emulsifier adsorption to the crystals were examined by comparing a commercial refined oil and a chromatographically purified oil. The results show that water generally increases the adhesion between fat and sugar crystals in oils and also increases the surface activity of the oil-soluble food emulsifiers. Minor oil components give a small increase in the adhesion between fat and sugar crystals in oils, but do not influence the adsorption of food emulsifiers in any systematic way.     

核苷酸生产技术现状及展望

核苷酸的生产方法主要有化学合成法、RNA酶解法、微生物发酵法以及生物催化法。探讨了这些方法的原理和发展及其在工业化生产中的优劣势。化学合成法的路线长、立体选择性差,所用试剂昂贵并有一定毒性,生产成本较高;酶解法能一次得到4种核苷酸的混合物且收率较高,是目前我国核苷酸工业生产所用的主要技术,但其后提取难度大,产品纯度不高;微生物发酵法难以解决细胞通透性的问题;生物催化法是发酵法的延伸,菌体培养和酶催化反应分两步进行,有效地解决了细胞通透性问题,并可以通过偶联不同的基因工程菌株生产多种复杂核苷酸、核苷糖乃至寡聚糖,这在核苷酸工业、医药及糖化学、糖生物学合成工业中是极其重要的一个环节。