Oxidative regeneration of sulfided sorbent by H2S without emission of SO2

Much SO₂, another perilous air pollutant, was emitted during the oxidative regeneration of sulfided sorbent by H₂S. In order to prevent emission of SO₂, we carried out oxidative regeneration with the physical mixture of CaO and sulfided sorbent and investigated the effect of regeneration temperature and oxygen concentration on the reactivity of CaO with S0₂. The effluent gases were analyzed by G.C. and the properties of sorbent were characterized by XRD. SEM, TG/DTA and EPMA. Deterioration of reactivity of CaO with S0₂ resulted in increment of emission of SO₁₂ due to the structural changes of CaO above 750°C and that at 850°C was more severe. Furthermore EPMA and XRD analysis revealed that product layer diffusion through the solid product, CaSO₄, was the rate limiting step for CaO sulfidation. The reaction of CaO w:.th SO₂ was first order approximately and that was accelerated by high O₂ concentration.     

黑色金属常温磷化发黑

提出了一种新型黑色金属常温磷化发黑工艺，研究了影响膜层质量的各种因素，结果表明，常温磷化发黑集常温发黑和常温磷化二者的优点，磷化发黑膜层是磷化膜与发黑膜协同生长形成的“共生膜”。黑色金属在10－15℃范围内处理6－10min，可以获得防护和装饰性能优良的磷化发黑膜。     

Effect of the method of preparation of a Nd2O3-MgO catalyst on its efficiency in the reaction of oxidative coupling of methane

It is shown that the decomposition of a mixture of nitrates or coprecipitated carbonates or hydroxides of Mg and Nd form catalysts manifesting similar catalytic properties, while the catalyst obtained by impregnation is more active but much less selective. The mechanism of formation of the catalytically active phase and the nature of the active sites are discussed.     

荫罩黑化及DX气与煤气成分的探讨

本文介绍了彩色显像管荫罩黑化反应的机理,详细说明了DX气制气流程,以及DX气的成分对黑化膜品质的影响。计算分析了成分不同的煤气在制成DX气时的成分变化。同时还分析了黑化工艺和黑化设备对煤气成分波动的适应性,及在生产实践中改变DX气制气时的煤气空气对黑化膜质量的影响。     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

Oxidative dimerisation of propene to 1,5-hexadiene on Bi-Zn-O catalysts

The oxidative dimerisation of propene to 1,5-hexadiene has been investigated on Bi-Zn-O catalysts. The Bi₄₈ZnO₇₃ phase, observed in the catalysts calcined at 700 ° C is an active and selective catalyst for the formation of 1,5-hexadiene. The best catalytic performance (1,5-hexadiene selectivity 64%) has been obtained at 525 ° C, with a propene to oxygen ratio of 26, on a catalyst formed by Bi₄₈ZnO₇₃ with a small excess of ZnO.     

除油剂除锈剂发黑剂的进展

从逐渐不采用强酸碱的角度回顾了除油、除锈、发黑及电镀等技术近年的进展情况,介绍和评价了这类技术涉及的一些市售商品,提出了进一步推广应用这些材料必须解决的问题。     

V2O5/g⁃C3N4催化剂的制备及其模拟油中硫化物的脱除

以三聚氰胺、偏钒酸铵、硼酸为前驱体,通过煅烧法制备V₂O₅/g⁃C₃N₄催化剂。采用XRD、FT⁃IR、XPS、SEM和BET等技术对催化剂的结构与形貌进行表征。以V₂O₅/g⁃C₃N₄为催化剂,乙腈为萃取剂,H₂O₂为氧化剂对模拟油中二苯并噻吩（DBT）的脱除进行考察。探究了反应温度、催化剂质量、萃取剂体积、n(H₂O₂)/n(S)以及不同硫化物等因素对脱硫效果的影响。在模拟油体积为5.0 mL、萃取剂乙腈体积为3.0 mL、n(H₂O₂)/n(S)=8、催化剂质量为0.02 g、反应温度为30 ℃和反应时间为60 min的最佳条件下,DBT的脱除率达到91.9%,经过5次催化剂再生后脱硫率仍可以达到85.7%。     

HH902钢铁常温发黑剂配套工艺研究

本文着重介绍了HH902钢铁常温发黑剂的特点及配套工艺,介绍了清洁生产、节能的、具有可操作性、适用性的几种工艺流程及应用效果.