Effect of aluminium acetyl acetonate on the hydrogen and nitrogen permeation of carbon molecular sieves membranes

With a growing interest in hydrogen as energy carrier, the efficient purification of hydrogen from gaseous mixtures is very important. This paper addresses the separation of hydrogen using Carbon Molecular Sieves Membranes (CMSM), which show an attractive combination of high permeability, selectivity and stability. Supported CMSM containing various amounts of aluminium have been prepared from novolac and aluminium acetyl acetonate (Al(acac)₃) as carbon and alumina precursors. The thickness of the CMSM layers depend on the content of Al(acac)₃ in the dipping solution, which also has influence in the pore size and pore size distribution of the membranes. The permeation properties of the membranes against the Al content in the membrane follows a volcano shape, where the membrane containing 4 wt (%) of Al(acac)₃ has the best properties and was stable during 720 h for hydrogen at 150 °C and 6 bar pressure difference. All the CMSM have permeation properties well above the Robeson Upper limit.     

Understanding silica-supported metal catalysts: Pd/silica as a case study

Supported metal catalysts, particularly noble metals supported on SiO₂, have attracted considerable attention due to the importance of the silica–metal interface in heterogeneous catalysis and in electronic device fabrication. Several important issues, e.g., the stability of the metal–oxide interface at working temperatures and pressures, are not well-understood. In this review, the present status of our understanding of the metal–silica interface is reviewed. Recent results of model studies in our laboratories on Pd/SiO₂/Mo(1 1 2) using LEED, AES and STM are reported. In this work, epitaxial, ultrathin, well-ordered SiO₂ films were grown on a Mo(1 1 2) substrate to circumvent complications that frequently arise from the silica–silicon interface present in silica thin films grown on silicon.     

Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

实时CSCW系统中迟加入问题的研究

针对实时CSCW系统中的迟加入问题，提出了一个改进的多“迟加入Server”算法。该算法能够有效的解决让“迟加入Client”可靠加入到协同工作的问题。通过实例验证了该算法的有效性，为进行更高效的协同工作提供了支持。     

Catalytic dehydrogenation of ethylbenzene with carbon dioxide: promotional effect of antimony in supported vanadium–antimony oxide catalyst

Alumina-supported vanadium oxide, VO_x/Al₂O₃, and binary vanadium–antimony oxides, VSbO_x/Al₂O₃, have been tested in the ethylbenzene dehydrogenation with carbon dioxide and characterized by S_BET, X-ray diffraction, X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction and CO₂ pulse methods. VSbO_x/Al₂O₃ exhibited enhanced catalytic activity and especially on-stream stability compared to VO_x/Al₂O₃ catalyst. Incorporation of antimony into VO_x/Al₂O₃ increased dispersion of active VO_x species, enhanced redox properties of the systems and formed a new mixed vanadium–antimony oxide phase in the most catalytically efficient V_0.43Sb_0.57O_x/Al₂O₃ system.     

Preparation and characterisation of vanadium catalysts supported over alumina-pillared clays

Supported vanadium-containing catalysts were prepared by impregnation of Al-pillared clays with NaVO₃ precursor aqueous solutions. A montmorillonite and a saponite, both natural as well as previously pillared with Al₁₃-Keggin polycations, were used as supports, being impregnated with solutions of the precursor by means of the incipient wetness technique. The layered structure of the supports is maintained after impregnation, and even after calcination of the impregnated solids at 500 °C, although with a significant worsening of the textural properties of the solids, in particular, a loss of specific surface area. Three crystalline vanadium-containing phases were identified in the impregnated solids, namely, NaV₃O₈, AlVO₄ and V₂O₅ (shcherbinaite). The reduction of these phases to V³⁺ species was observed as wide processes in the 450–750 °C range, all of them centred at ca. 600 °C.     

Effects of CSCW on organizations

We consider the potential impact of Computer Supported Cooperative Work, with special reference to large technically advanced projects involving several organizations. It is vital that such projects are managed efficiently, without delays, since a product that reaches the market a few months earlier than its competitors enjoys a great advantage. Traditional methods of coordinating large projects, based on hierarchical communication, tend to produce delays, since technicians at remote sites are obliged to solve coordination problems by passing them up the hierachy. It would be better if such problems were solved by improvising conferences among the technicians; Computer Supported Cooperative Work will provide the technical means of implementing this heterarchical style of management without losing control of the project. The use of computers as a social medium raises methodological and ethical issues which are discussed in the final section.     

计算机支持的技术支援:概念与网络体系结构

首次提出了计算机支持的技术支援（CSTA）概念。计算机支持的技术支援是信息社会中技术支援的主要形式。分析了技术支援的过程、CSTA的技术特点和优点．总结了CSTA的基本研究内容和常用形式。针对技术支援的新需求、介绍了基于P2P的CSTA网络体系结构。     

Vanadium species in new catalysts for the selective oxidation of methane to formaldehyde: Activation of the catalytic sites

New vanadium oxide supported on mesoporous silica catalysts for the oxidation of methane to formaldehyde were investigated by infrared and Raman spectroscopies to identify and characterize the molecular structure of the most active and selective catalytic sites. In situ and operando experiments have been conducted in order to understand the redox and hydroxylation/dehydroxylation processes of the vanadium species. (SiO)₂VO(OH) species were identified in these catalysts in reaction conditions and shown to undergo a deprotonation at 580 °C under vacuum, leading to a site giving a photoluminescence band at 550 nm attributed to reverse radiative decay from the excited triplet state:

(V⁴⁺–O⁻)^*  (V⁵⁺O²⁻). An activation mechanism of vanadium monomeric species with electrophilic oxygen species is proposed.     

The adsorption characteristics of two Mo sites on a sulfided MoO3/γ-Al2O3 surface

The surface structure of the oxidized and ammonia dissolved MoO₃/-Al₂O₃ samples and the adsorption characteristics of the sulfided samples were investigated by Laser Raman Spectroscopy (LRS) and Low Temperature Infrared Spectroscopy (LTIR) techniques.It was verified that there were two kinds of coordinated unsaturated Mo sites (denoted as Mo_A(CUS) and Mo_B(CUS)) on the surface and the precursors of Mo_A(CUS) and Mo_B(CUS) were Mo(O) and Mo(T), respectively. It was also concluded that Mo_A(CUS) sites could adsorb NO and CO, while Mo_B(CUS) could adsorb CO only. The surface concentration of Mo_A(CUS) might be far smaller than that of Mo_B(CUS).