Deposition of UF5 on the surface of steel material having oxide coating in contact with gaseous UF6

When UF6 is handled in leak tight system, the amount of uranium compound formed on the surface of containers, valves, and others in UF6 handling facilities is not so significant for a short term that special attention has not been given to this problem. The present work was done to throw some more light on this problem based on the recent experiment. We discuss the possibility that the intermolecular transfer of a fluorine atom from UF6 to UF5 may participate in the formation of uranium compound. The discussion includes also the unique features contained in the experimental result, the reaction processes assumed in this problem, and the derivation of a rate equation for expressing the deposition of uranium compound. Furthermore, we propose a new method for determining nonlinear parameters included in a governing differential equation having two variables for expressing the deposition of uranium compound from experimental raw data.     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

不同管距时玉米渗灌效果的试验研究

在运城市夹马口灌区和红旗灌区进行了1996,1997两个年度的玉米渗灌试验,研究了不同毛管间距条件下渗灌对其产量及水分生产率等的影响。结果表明,玉米渗灌毛管间距采用0.8~1.0 m较为适宜。毛管间距愈大,产量愈低;渗灌较地面灌平均减产7.23%,较旱地平均增产30.8%;玉米生长期内总耗水量地面灌最大,渗灌次之,旱地最小。渗灌可明显提高玉米水分生产率,渗灌处理水分生产率平均为1.65 kg/m3,是地面灌的1.2倍,是旱地的1.33倍;两年度渗灌较地面灌平均节水44.4%。     

RI/VI联用测定聚乙烯相对分子质量及其分布

150℃测试温度下，以1，2，4-三氯苯为溶剂，采用示差折光指数器，毛细管黏度计双检测器联用凝胶渗透色谱技术测定了聚乙烯的相对分子质量及其分布。与常规凝胶渗透色谱法对比，该方法不仅能直接得到聚乙烯较精确的相对分子质量和分布形态，同时可以得到聚乙烯的特性黏数分布。     

Data structure and algorithms for fast automatic differentiation

In this paper we discuss the data structure and algorithms for the direct application of generalized Leibnitz rules to the numerical computation of partial derivatives in forward mode. The proposed data structure provides constant time access to the partial derivatives, which accelerates the automatic differentiation computations. The interaction among elements of the data structure is explained by several numerical examples. The paper contains analysis of the developed data structure and algorithms. Copyright © 2003 John Wiley & Sons, Ltd.     

利用T2分布进行岩石孔隙结构研究

测井地层评价的基本任务除了要研究储层参数外，还要研究岩石孔隙结构。核磁共振测井技术和出现和应用，为测井解释研究孔隙结构提供了一种有效方法。通过研究泥质砂岩岩心核磁共振T2分布与压汞毛管压力曲线之间的关系，建立起二者之间的相互计算方法，从而为利用T2分布进行岩石孔隙结构研究提供了理论和方法的支持。     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

A family of lower- and higher-order transversal linearization techniques in non-linear stochastic engineering dynamics

Sample pathwise numerical integration of noise-driven engineering dynamical systems cannot generally be performed beyond a limited level of accuracy, especially when the noise processes are modelled using (filtered) white noises. Recently, a locally transversal linearization (LTL) strategy has been proposed by the author (Proc Roy Soc London A 2001; 457 :539–566) for direct integration of deterministic and stochastic non-linear dynamical systems. The present effort is focussed on a host of extensions along with detailed theoretical error analyses of the linearization approach, especially as applied to problems in non-linear stochastic engineering dynamics. Thus, to begin with, estimates of local and global error orders in the basic LTL scheme are obtained separately for the displacement and velocity vectors when the system is driven either by a set of additive noises or by an arbitrary combination of (independently evolving) additive and multiplicative noises. Following this, a new family of higher-order LTL schemes is proposed in order to improve upon the basic LTL method and the associated error orders are established. A stepwise implementation of the lower- and higher-order versions of the LTL method, along with certain computational aspects, is also outlined. The proposed schemes are numerically illustrated, to a limited extent, for a single degree-of-freedom (SDOF) and a two degree-of-freedom (TDOF) non-linear engineering systems under additive and/or multiplicative white noise excitations. Copyright © 2004 John Wiley & Sons, Ltd.     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

双重孔隙介质油藏中的吸渗排油作用

利用美国SSI公司研制的COMPN模拟软件对双重孔隙介质油藏一种重要的开采机理 吸渗排油进行了模拟研究,考察了一个基质岩块为四周裂缝所包围时.在驱动压力和毛管压力的不同平衡(驱动压力和毛管压力的相对大小)关系下的水驱油采收率和水驱油效率的变化规律.