结构形式对椭圆扁管管内传热与流阻性能影响

利用数值模拟方法结合场协同理论,对直椭圆扁管、单向螺旋椭圆扁管和变向螺旋椭圆扁管管内传热与流动情况进行了数值模拟计算和理论分析,比较研究了不同的Re、Pr下,3种椭圆扁管的管内传热与流阻特性。结果表明,单向螺旋椭圆扁管和变向螺旋椭圆扁管与直椭圆扁管相比有很好的强化传热性能,而变向螺旋椭圆扁管要比单向螺旋椭圆扁管的强化传热性能更好。在管内流体具有高Pr及低Re的条件下,2种螺旋椭圆扁管的强化传热效果显著,可作为很好的强化传热元件应用于工程实际中。     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

穿透裂纹和表面半椭圆裂纹模型的失效评定曲线比较

针对弹塑性材料裂纹管道的J积分计算建立了等效穿透裂纹和表面半椭圆裂纹2种有限元模型。在等效穿透裂纹模型中应用了1／4节点单元，在表面裂纹模型中采用了线弹簧单元。用这2种模型计算J积分，分别对3个实际含裂纹管段建立了失效评定曲线。比较了2种模型的失效评定曲线和R6通用曲线的差别，指出穿透裂纹模型偏于保守，建议在油气管道断裂的工程评定中采用半椭圆表面裂纹模型。     

全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％     

自动壳封焊机焊缝位置控制的实验研究

为解决自动壳封焊机机械凸轮式仿形的缺点，提出了基于电子凸轮的控制方案，为实现电子凸轮控制方案，在焊接轨迹形成分析的基础上，建立了焊枪位置控制的数学模型，改进后的自动焊机焊接试验表明，焊接位置误差较小，可以满足生产的需要。     

On the pressure drop modeling of monofilament-woven fabrics

Pressure drop of monofilament-woven fabrics is often calculated via the so-called orifice model in which a discharge coefficient is assigned to the weave's unit cell. In all previous models of woven fabrics, the filaments were assumed to have circular cross-sections—an assumption which is not entirely accurate especially when there is a considerable tension in the warps and wefts. Following the methodology developed by Lu et al. [1996. Fluid flow through basic weaves of monofilament filter cloth. Textile Research Journal 66 (5), 311-323], a new set of expressions are derived for calculating the most constricted open area, and so the discharge coefficient, of plain-woven monofilament fabrics having filaments with elliptical cross-sections. Conducting numerical simulations for computing the pressure drop of such fabrics, we observed a logarithmic relationship between the discharge coefficient and the Reynolds number. It was also shown that the discharge coefficient decreases by increasing the aspect ratio of the filaments’ cross-section.     

Angles-only relative navigation in highly elliptical orbits

For angles-only relative navigation system only measures line-of-sight information,there are inherent problems in the ability to determine the range between Chaser and Target. Angles-only relative navigation is an attractive alternative for inspecting or rendezvous with noncooperative target,if adequate accuracy can be achieved. Angles-only relative navigation model considering J2 perturbation is presented for tracking and rendezvous with noncooperative target in highly elliptical orbit. Impulsive out-of-plane maneuvers of the Chaser are used to improve the navigation accuracy. The first impulse burns in cross-track directions to change the orbit inclination of the Chaser. The second impulse burns after one orbit period to change the orbit of the Chaser back. The simulation results show that the relative navigation system without maneuvers can’t correct the initial state errors,while impulsive out-ofplane maneuvers of the Chaser improves the navigation accuracy. Angles-only relative navigation with chaser vehicle maneuvers to improve observability is effective when the spacecrafts are in highly elliptical orbits.     

大型汽轮发电机定子绕组端部的振动分析

为了研究大型汽轮发电机定子绕组端部振动可靠性,需要有效地分析和识别大型汽轮发电机定子绕组端部的椭圆模态,并根据此模态调整相应结构,提高结构稳定性.利用定子绕组的循环对称特性,推导出多重循环结构的摄动法.根据实际中影响循环对称特性的非循环部件或者约束,选取适当的步长,加入非循环对称部分,对原循环结构逐步摄动求解,最后将摄动法求解的结果与试验结果进行比较.结果表明,将非循环部分加入到循环结构后,使用摄动法分步求解,不仅能判断摄动过程中的椭圆模态变化,还能识别并确定感兴趣的椭圆模态.定子端部其他模态亦可用此法确定.     

基于椭球模型的射线跟踪地空信道模型研究

宽带地空信道传输环境很复杂,多径衰落、多径时延、衰落速率、波达方向、相干时间等参数都会影响地空通信系统的设计.为了更全面、准确的描述地空信道特性,利用地空椭球信道模型的建模方法,通过实际测量和统计的实测数据获得俯仰角、直射信号的传输时延和在此仰角下的多径信号的最大时延值,计算得到它的随机波达方向和随机时延,将波达方向应...     

多相主动轮廓模型的眼底图像杯盘分割

目的 视盘及视杯的检测对于分析眼底图像和视网膜视神经疾病计算机辅助诊断来说十分重要,利用医学眼底图像中视盘和视杯呈现椭圆形状这一特征,提出了椭圆约束下的多相主动轮廓模型,实现视盘视杯的同时精确分割。方法 该算法根据视盘视杯在灰度图像中具有不同的区域亮度,建立多相主动轮廓模型,然后将椭圆形约束内嵌于该模型中。通过对该模型的能量泛函进行求解,得到椭圆参数的演化方程。分割时首先设定两条椭圆形初始曲线,根据演化方程,驱动曲线分别向视盘和视杯方向进行移动。当轮廓线到达视盘、视杯边缘时,曲线停止演化。结果 在不同医学眼底图像中对算法进行验证,对算法抗噪性、不同初始曲线选取等进行了实验,并与多种算法进行了对比。实验结果表明,本文模型能够同时分割出视盘及视杯,与其他模型的分割结果相比,本文算法的分割结果更加准确。结论 本文算法可以精确分割医学眼底图像中的视盘和视杯,该算法不需要预处理,具有较强的鲁棒性和抗噪性。