Validation of performance of real-time kinematic PPP. A possible tool for deformation monitoring

Structural failures (bridge or building collapses) and geohazards (landslides, ground subsidence or earthquakes) are worldwide problems that often lead to significant economic and loss of life. Monitoring the deformation of both natural phenomena and man-made structures is a major key to assessing structural dynamic responses. Actually, this monitoring process is under real-time demand for developing warning and alert systems.One of the most used techniques for real-time deformation monitoring is the Global Navigation Satellite System (GNSS) real-time procedure, where the relative positioning approach, using a well-known reference station, has been applied.This study was conducted to evaluate the actual quality of the real-time kinematic Precise Point Positioning (PPP) GNSS solution for deformation monitoring, where it can be concluded that a promise tool is under development and should be taken into account on actual and near future real-time deformation monitoring studies and applications.     

Development of autonomous monitoring and performance evaluation system of grid-tied photovoltaic station

This work aims to improve the existing monitoring systems MS for two grid-connected PV stations GCPVS of URERMS ADRAR, to eliminate its limitations. This improvement consists of developing an MS which is used for two PV stations with different configurations. This MS contains new LabVIEW-based monitoring software for visualizing real-time measured data and evaluating GCPVS performance. In addition, it illustrates the 2D and 3D real-time relationships of PV system parameters, which allow us to understand the dynamic behavior of PV system components. This developed monitoring software synchronizes also the various data acquisition units DAU of GCPVS, allowing simultaneous data access.To perform a reliable performance analysis and a comparative study of different GCPVS based on accurate measurements, the sensor's calibration is performed with its DAU. The MS autonomy is ensured by integrating developed PV-UPS. A graphical user interface is provided for the evaluation of PV-UPS performance.     

用CPLD实现SRAM工艺FPGA的安全应用

提出了一种利用CPLD产生的伪随机码来加密SRAM工艺FPGA的方法,并详细介绍了具体的电路和VHDL代码。     

能源实时监控与信息管理系统出现的问题及解决的方法

中国石化北京燕化石油化工股份有限公司动力事业部二供水车间电气改造完成后，能源实时监控与信息管理系统出现线路名称不统一、电流互感系数变比不起作用、数据查询功能及统计报表数据的准确性等问题，严重地影响系统的使用。通过对比分析，找到了出现问题的实质，对源代码进行修改，问题得到了解决。同时也成功地解决了其他部门遇到相类似的问题。     

Field Static Load Test on Kao-Ping-Hsi Cable-Stayed Bridge

Field load testing is an effective method for understanding the behavior and fundamental characteristics of a cable-stayed bridge. This paper presents the results of field static load tests on the Kao-Ping-Hsi cable-stayed bridge, the longest cable-stayed bridge in Taiwan, before it was open to traffic. A total of 40 loading cases, including the unit and distributed bending and torsion loading effects, were conducted to investigate the bridge behavior. The atmospheric temperature effect on the variations of the main girder deflections was also monitored. The results of static load testing include the main girder deflections, the flexural strains of the prestressed concrete girder, and the variations of the cable forces. A three-dimensional finite-element model was developed. The results show that the bridge under the planned load test conditions has linear superposition characteristics and the analytical model shows a very good agreement with the bridge responses. Further discussion of deflection and cable forces of the design specifications for a cable-stayed bridge is also presented.     

插补法CAI研究

数字程序控制计算机辅助教学是将计算机技术用于数字程序控制的教学过程，它帮助学生学习并模拟教学实验．本文介绍了数字程序控制中直线插补和圆孤插补的ＣＡＩ实现方法．     

VB中实现打印功能的方法

介绍了在VB开发的应用程序中,实现打印功能的几种方法.这些方法包括:①打印窗口;②通过PRINTER打印;③利用数据报表进行打印;④将打印内容传送于Office组件的Word或Excel,通过Word、Excel打印.同时列出了相关的程序格式.     

数字电视传输流的实时码率变换系统

数字视频压缩后通常是打包成传输流的形式进行传送，年个传输流有其固定的发送码率，在某些应用场合，比如信道调制前端，需要对输入传输流码率进行改变以适应该信道要求，描述了一种全硬件实现，双路输出，实时，节目可选择的码率变换系统的原理及具体实现。     

A comparison of three approaches for predicting C4 species cover of northern mixed grass prairie

The C4 composition of Canadian mixed-grass communities is more sensitive to environmental change than other grasslands. Reliable methods of detecting such changes are necessary if these landscapes are to be properly managed. One approach is to use satellite remote sensing systems. Various studies have shown that the asynchronous seasonality of C3 and C4 species allows the relative abundance of each photosynthetic type to be estimated using temporal trajectory indices (TTIs) of sensor-derived normalized difference vegetation index (NDVI). In this study, we compared three approaches for predicting C4 species cover at Grasslands National Park (GNP) (Saskatchewan, Canada). TTIs related to Approach I were calculated from plots of NDVI vs. day-of-year (DOY). TTIs related to Approach II were calculated from plots of normalized cumulative NDVI vs. growing degree day (GDD). TTIs related to Approach III were calculated as ratios of early-season NDVI to late-season NDVI. Our analyses were conducted at two separate ecological scales. A within-community analysis used field-sampled data from upland grassland to compare techniques at sampling resolutions of 0.5, 2.5, 10, and 50 m. An across-community analysis compared techniques using a vegetation survey of the GNP region and TTIs calculated from Advanced Very High Resolution Radiometer (AVHRR) data (1 km). At both scales, TTIs related to the timing of specific phenological events were the best predictors of C4 species cover. While all techniques performed well in the within-community study, Approach III performed best. Here, the predictive ability of each approach was weak at a resolution of 0.5 m but stronger at 2.5, 10, and 50 m resolutions. We also found that the optimal sampling dates for Approach III fell within a certain GDD range. This is encouraging for the a priori selection of sample dates, which would make the need for full seasonal time series redundant. In the across-community analysis, the AVHRR-derived Approach II TTIs were better able to discriminate among grasslands of different C4 composition than any other technique (overall accuracy=74%). However, for some C4 cover classes, the predictive accuracy of this approach was low. While these results are encouraging for the use of spectral data in monitoring the C4 cover of northern prairie, various research issues remain. At the within-community level, these include (a) further attempts to define objective criteria for the a priori identification of sampling dates for Approach III, and (b) and the extension of such studies to other growing seasons and community types/grassland regions. At the across-community level, these include the expansion of such techniques to a larger geographical region that contains a wider range in C4 cover values and land use types (e.g. ungrazed vs. grazed grasslands).     

Pesticide monitoring programme of the Ministry of Health of Brazil

The structure of the recently introduced Brazilian government programme for monitoring pesticide residues in six major agricultural products is described. Residues found from the analysis of samples of tomatoes and strawberries are discussed in detail. The much greater frequency of detection of pesticide residues, many of which are not approved for use in Brazil, in produce being sold on the domestic market, as opposed to that produced for export, is of major concern. It is perceived that this new monitoring programme will become permanent and be used to underpin enforcement actions that will need to be taken to reduce the numbers of incidents of illegal residues occurring, particularly in fresh fruits and vegetables.