活化疏松剂用于过磷酸钙生产的性能研究

介绍了在过磷酸钙中添加活化疏松剂的试验情况及运用效果。试验结果表明 :添加活化疏松剂后鲜肥转化率提高 4.0 % ,产品物性得到改善 ,结块倾向明显降低。     

The Influence of Surfactant on the Surface Characterization of Celestite in Spherical Oil Agglomeration

This study investigates the relationship between the critical surface tension of wetting of celestite and agglomeration recovery as well as the zeta potential in dependence of pH and amount of collector (Na‐Oleate). For this purpose, effects of pH and collector amount on the agglomeration recovery are investigated and zeta potential measurements and Fourier Transform Infrared Spectrophotometer (FTIR) analyses are carried out to determine the adsorption type of Na‐Oleate on celestite surface. The sessile drop technique is used for the measurement of contact angle and determination of the critical surface tension of wetting (Y_C) of celestite. The maximum agglomeration recovery is obtained at pH 7. The critical surface tension of wetting of celestite is very close to the surface tension of kerosene, which is 25.95 mN/m. Furthermore, at the optimum Na‐Oleate amount of 10 kg/ton, the critical surface tension of wetting of celestite is approximately equal to the surface tension of kerosene.     

Final Drying of Whole Milk Powder in Vibrated-Fluidized Beds

Vibro-fluidized beds are widely used in drying sticky powders and agglomerated materials as milk powder. Using a vibro-fluidized laboratory scale dryer, this work is aiming at analyzing preliminarily the effect of its operational variables on the drying kinetics and characteristics of whole milk powder. The full-factorial design technique with three replications at the central point has been employed to generate data and correlations to quantify the effect of inlet air temperature, air flow rate, and vibration bed amplitude on the drying curves and the milk powder properties related to its faster reconstitution in water (as tapped density, Hausner cohesion ratio, agglomerate size distribution, and internal pore concentration). Results obtained are analyzed and discussed to identify the adequate operation condition for final drying whole milk powder in vibro-fluidized beds, assuring a high product quality.     

钼精矿结球机理及对策研究

钼精矿产品质量的提高、粒度变细,干燥过程中结球现象严重。在氧化钼的焙烧过程中MoS2残留量较高。本文针对这一现象,分析了其结球机理,提出了相应对策及解决办法。     

Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

THE STICKY ISSUES OF DRYING

Unconrolled agglomeration of particles and adhesion of the particulate mass to wall surfaces are common severe problems in many drying operations. This paper reviews the mechanisms of interparticle and particle-surface attraction as well as the theory and the existing tests for characterising powders in terms of internal strength, wall friction and adhesion. The usefulness of the information obtained from these tests in dryer design and operation is critically reviewed. The importance of powder stickiness in various types of dryers is discussed and established methods of combating the problem are presented Recommendations an made for further research in the area of powder cohesion and adhesion.     

Influences of dehydrating process on properties of ATO nano-powders

1　INTRODUCTIONCrystallineSbdopedtinoxide (ATO) ,cassiteritestructure ,isawidebandgapn typesemiconductor.Be causeofitsopticalproperty (transparentforvisiblelightandreflectiveforIR )andelectroconductibility ,goodchemicalandmechanicalstability ,ithasmanyapplica tions,suchastransparentconductiveelectrodes ,photo voltaicdevices ,photosensors ,catalyst,antistaticcoatingsandelectrochromicmaterials[14 ] .AvarietyoftechniqueshavebeenusedtoprepareATOsuperfinepowders ,someinvolvedryprocesses ,ot…     

飞灰快速水化团聚颗粒的热态磨耗研究

利用热态磨耗实验台研究快速水化团聚颗粒在流化床中热态条件下的磨耗特征.研究表明,飞灰团聚用水量、添加剂用量和流化速度是影响飞灰团聚颗粒磨耗速率大小的关键因素.随着流化速度的降低和添加剂用量的提高,团聚颗粒的磨耗速率降低.飞灰团聚用水量在40%左右时,团聚颗粒磨耗速率最低.亦即在上述条件下团聚颗粒在流化床中停留时间相对较长,进而飞灰碳降低的幅度和自由氧化钙的利用率可能较大.     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

Investigation of kinetics of agglomerate growth in oil agglomeration process

In this study, the kinetics of agglomerate growth in a batch oil agglomeration process has been studied using bituminous coal. The effect of operating variables such as kerosene concentration, pulp density and speed of agitation on the agglomeration process was investigated. It has been found that the second-order kinetic equation describes the growth of agglomerates adequately. The growth of the agglomerates in the oil agglomeration process shows a self-preserving growth. Using this, a characteristic curve has been developed. For the prediction of the size distribution of the agglomerates, the d₅₀ values of the agglomerates must be known. Therefore, a model has been developed by using the kinetic equation for estimation of d₅₀ values of agglomerates for this coal. It was shown that the size distribution of the agglomerates for any levels of the process variables studied can be predicted using the equation of characteristic curve and d₅₀ values. Knowledge obtained from this study will be helpful for technological advancement of this kind of study.