Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

Impregnation of X Zeolite with Alkaline Hydroxide During the Synthesis

Enhancement of the basic properties of the X zeolite with FAU framework has been carried out during synthesis, without further treatment such as ion-exchange or impregnation. Control of the washing stage enables retention of the optimum amount of alkaline hydroxides, which increases the basic catalytic activity of X zeolite in the alkylation of toluene. This alkaline hydroxides neither affect the FAU framework nor the silicon/aluminium molar ratio of the X zeolite. The optimum (Na + K)/Al molar ratio of the improved catalyst was 1.06 corresponding to a washing volume of 200 mL. This X zeolite presented better catalytic activity than a cesium-zeolite prepared by ion-exchange. The presence of hydroxysodalite impurity in the X zeolite increased the amount of impregnated alkaline hydroxides but not the catalytic activity. The present study shows that it is possible to increase the basic properties of the X zeolite directly in the synthesis process.     

Evidence for non-site-isolation in ZSM-5 from ion-exchange and catalytic studies

Ion exchange of HZSM-5 samples with alkali metal cations, using metal chloride solutions, results in partially exchanged zeolites, MHZSM-5, M = Li, Na, K or Cs. The degree of exchange is found to increase with increasing ionic radius of the cations. The catalytic properties of the alkalized zeolites were evaluated using the reaction conditions under which the catalytic activity of the HZSM-5 samples in terms of n-hexane cracking is proportional to the aluminium content. From the residual catalytic activity exhibited by the Na-, K- and CsHZSM-5 samples it is concluded that each of the larger Na⁺, K⁺ and Cs⁺ ions is influencing more than one AlO ₄ ^– tetrahedron, implying that the aluminium sites in ZSM-5 are not isolated. The ion-exchange results are then interpreted in terms of non-isolated aluminium sites. The ion-exchange and catalytic properties of the zeolites as a function of aluminium content are also discussed.     

金属离子(Na+、K+、Mg2+、Ca2+)与鸟嘌呤活性位点相互作用的理论研究

本文用量子化学从头算方法对金属离子与碱基活性位点的相互作用及其形成配合物的结构和性质进行理论研究.用HF/6-311G*优化鸟嘌呤及其金属离子(Na 、K 、Mg2 、Ca2 )配合物.在HF水平上,运用6-311G*基组计算Ⅰa和Ⅱa族金属离子(Na 、K 、Mg2 、Ca2 )与鸟嘌吟(Guanine)活性位点的相互作用.结果表明:Mg2 、Ca2 离子引起配位体的变形较Na 、K 离子大;Mg2 、Ca2 离子配合物比Na 、K 离子配合物稳定.     

烟酰胺配合物的合成及晶体形态的电镜观察

为了进一步了解烟酰胺配体的配位特征和结构特点，对配合物Mn(Nica)2Cl2,Fe(Nica)2Cl2,Co(Nica)2Cl2,Ni(Nica)2Cl2,Cu(Nica)2Cl2和Zn(Nica)2Cl2进行了合成和红外光谱、透射电镜、扫描电镜的表征，烟酰胺以吡啶氮与金属离子配位，Mn(Ⅱ），Fe(Ⅱ),Co(Ⅱ)，Ni(Ⅱ）配合物为六方晶体结构，Cu(Ⅱ）配合物为金刚石立方晶体结构。     

Epifluorescence microscopy study of a quadruple node of triple junctions of grain boundaries in a Eu2+‐doped Kcl:Kbr solid solution by using the doping ion as a fluorochrome

A typical quadruple node (QN) of triple junctions (TJs) of grain boundaries (GBs) in a Eu²⁺‐doped KCl_0.52Br_0.48 solid solution is investigated from the geometrical point of view by epifluorescence microscopy using the doping ion as a fluorochrome. The excitation and fluorescence optical properties of the fluorochrome were previously characterised by spectrophotometry whereas the structural nature of the studied material as well as its Bravais lattice type, unit cell size and long‐range translational order degree was determined by X‐ray diffraction. A three‐dimensional reconstruction was built from the microscopy images of different optical cross‐sections of the studied arrangement of crystal defects. In the close vicinity of the QN, the studied arrangement of crystal defects adopts the geometry of a collapsed tristetrahedron which, centred at the QN, has its legs along the TJs and, hence, has its faces as collapsed in pairs into the GBs. The angles defined by different TJ couples as well as the dihedral angles defined by the different GB couples meeting in every TJ were measured at the QN site. All, the image recording and stacking as well as the measuring procedures are carefully described. The measured TJ angles (97°, 117°, 95°, 117°, 99° and 130° ± 2°) depart from the characteristic angle (109.47°) of a tetrahedron whereas the measured GB angles (101°, 119°, 140°; 125°, 127°, 108°; 133°, 109°, 119°; 129°, 99° and 132° ± 2°) depart from the angular argument (120°) of a 3‐fold symmetry rotation indicating that, in the close neighbourhood of the QN, the studied arrangement of crystal defects is structurally unstable. Such an instability is associated with an observed mismatch in orientation (by angles of 20°, 15°, 33° and 30° ± 2°) between the TJs and some <111> zone axis matrix lattice crystallographic directions ([], [11], [11] and [11]), respectively). Local variations in anionic composition, existing within the solid solution matrix, are discussed to be responsible for this mismatching and, therefore, for the observed structural instability.     

A novel anions and cations co-doped strategy for developing high-performance cobalt-free cathode for intermediate-temperature proton-conducting solid oxide fuel cells

The sluggish activity of cathode at intermediate-temperature limits commercialization of proton-conducting solid oxide fuel cells (H-SOFCs). In this investigation, a novel cathode of Ba_0.95Ca_0.05Fe_0.85Sn_0.05Y_0.1O_2.9−δF_0.1 was successfully developed by co-doping of anion F and cations Ca, Sn, Y. We studied the effect of F⁻-doping on phase structure, electrical conductivity and electrochemical properties of the cell. Compared with Ba_0.95Ca_0.05Fe_0.85Sn_0.05Y_0.1O_3−δ, F⁻-doped Ba_0.95Ca_0.05Fe_0.85Sn_0.05Y_0.1O_3−δ exhibited higher conductivity. Composite cathode consisting of Ba_0.95Ca_0.05Fe_0.85Sn_0.05Y_0.1O_2.9−δF_0.1 and Sm_0.2Ce_0.8O_2−δ was applied in H-SOFCs with BaZr_0.1Ce_0.7Y_0.2O_3−δ electrolyte which achieves an encouraging performance with the maximum power density of 1050 mW cm⁻² and polarization resistance of 0.04 Ω cm² at 700 °C. The result of First-principles calculations based on spin-polarized Density Functional Theory shows that doping of F⁻ reduces the activation energy required for migration of oxygen ions. These results demonstrate that the anions and cations co-doped strategy can provide a new horizon for the cathode in H-SOFCs.     

Complex Formation of Divalent Cations with Carboxylic Acid Resins as a Factor Determining Different Stationary States of Their Swelling

Three samples of carboxylic acid gel-type cross-linked polyelectrolytes were examined by registering the extent and kinetics of their volume change depending on the temperature, concentration, and nature of external electrolyte solutions, as well as the initial state (ionic form, water content) of the bead. It is found that in some systems the swelling of the bead (as a result of lowering the temperature) proceeds much more slowly than the preceding shrinking (as a result of the increase of temperature). Moreover, the initial volume of the bead is not restored, and a new stationary state of swelling is established. By means of optical dilatometry, it is found that in the systems in which the differences in the stationary states of swelling are found, the beads display plasto-elastic properties, whereas in the absence of such differences the beads show elastic properties. It is found that different stationary states of swelling are also established when the beads of copolymer of methacrylic acid cross-linked with divinylbenzene in Na⁺ form in the dry state and in the NaCl solution-swollen state are placed into a solution of a divalent cation salt. The difference in the stationary states of swelling reaches 12% in 4 N NiCl₂ solution. The substantial differences in the swelling behavior and viscoelastic properties of the resins in their Na⁺, Mg²⁺, Ca²⁺, and Ni²⁺ forms are interpreted in terms of formation of different kinds of complexes of functional groups of the polymer with Ca²⁺ and Ni²⁺ ions.     

烷基季铵阳离子改性制备有机粘土的研究及应用进展

蒙脱石是属于2∶1型层状硅酸盐类粘土矿物,具有优异的物理化学性能。近年来,烷基季铵盐改性的有机膨润土作为一种新型的化学、化工原料在环境保护和新材料等应用方面引起了广泛的关注并且已成为当前材料科学的研究热点之一。本文概括了蒙脱石、烷基季铵盐的结构特征;阐述了有机膨润土的制备原理及合成工艺;介绍了有机蒙脱石的表征技术和现阶段研究成果;最后对有机粘土应用及发展前景进行了概述和展望。