Characteristic tryptic peptides and gelling properties of porcine skin gelatin affected by thermal action

Thermal action in extraction process had effects on characteristic tryptic peptides identification and gelling properties of porcine gelatin. SDS-PAGE, HPLC-LTQ/Orbitrap high-resolution mass spectrometry, texture analyser and rheometer were used to evaluate collagen depolymerisation degree, characteristic tryptic peptides and gelling properties of gelatins prepared in various thermal actions. Results showed that with increasing temperature and time, depolymerisation degree enlarged, while gel strength, gelling and melting temperature decreased. Mass spectra showed that 47 and 49 common characteristic tryptic peptides were identified in gelatins extracted at 50 °C and 100 °C with various times, respectively. Moreover, 34 common characteristic tryptic peptides were identified in all gelatin samples. Further comparison between this work and our previous investigations yielded 20 common characteristic tryptic peptides, which stably exist in various thermal actions. These common characteristic tryptic peptides may be very helpful for the accurate authentication of porcine gelatin.     

Valorisation of potato wastes

Potato processing industry has a high degree of discarding, which currently has low added value being used primarily for animal feed. However, potato wastes offer a broad range of interesting components such as antioxidants, starch, protein or fibre with potential applications in the food and non-food industries. The recovery of these high valuable fractions using efficient multistage and multiproduct processes could be of great interest. This short review provides a general overview on the integral valorisation of potato wastes, offering an updated vision of the main residual parts generated during potato harvesting and processing, the high valuable obtained components focusing on the bioactive ones and the potential of the emerging extraction techniques over conventional ones. In addition, innovative applications are discussed to highlight the scientific and applied interest of these underutilised and undervalued fractions and to emphasise the integral valorisation of raw materials.     

低温低渗透砂岩油藏窜流大孔道深部封堵技术研究

所用堵剂为高强度的淀粉接枝聚丙烯酰胺交联凝胶SAMG-1,由<6%淀粉、4.5%-5.5%丙烯酰胺、0.003%-0.006%交联剂组成,35℃成胶时间受淀粉和交联剂用量控制,为18-20小时以上,成胶前黏度-100 mPa.s。该堵剂具有长期稳定性,在储层岩心中注入深度15 cm的堵剂,在35℃候凝48小时后及老化90天后,封堵强度分别为0.61和0.59 MPa/cm,封堵率分别为98.6%和98.1%。该堵剂优先进入高渗层,注入0.5 PV并成胶后,2组双填砂管组成的模型低、高渗管渗透率保留率分别为68.4%、0.7%和69.4%、0.0%。吉林扶余油田西一区+15-8.2区块有水井6口,油井13口,含水率达91.5%,注入水最快在5天内到达油井。报道了该区块整体深部调剖封堵窜流通道的情况,详细叙述了+15-9.2井施工中通过注入压力和井底回压控制注入流量,使堵剂陆续进入原生和次生孔道的工艺作业,该井设计注入堵剂92 m3。6口水井整体调剖后,油井产液量差别减小,产油量增加,有效期已超过了9个月,共增油843 t,含水平均下降3.87%。图7表1参8。     

Gelling of alginate fibres

Equipment was developed to measure the time for complete gelling of sodium alginate fibres in calcium chloride solution, taken as the time to achieve maximum tensile strength. The effects of fibre diameter, alginate concentration, alginate composition and calcium chloride concentration on gelling time were investigated. A diffusional model, developed to predict the gelling time, agreed with experimental results except for the effect of calcium ion concentration which was modelled empirically.     

Rhizobium trifolii capsular polysaccharide: a novel biopolymer with striking physical properties

The physical properties of the capsular polysaccharide of Rhizobium Trifolii (CPS) were investigated. Viscosity measurements provided information about the hydrodynamic volume of single coils, the perturbation of solvent flow and the shear-thinning behaviour of concentrated solutions. Changes in chain geometry and the development of an intermolecular network as a function of temperature were monitored using the techniques of optical rotation and dynamic oscillation. Finally, analysis of calorimetric thermograms elucidated the type of interactions between CPS and the bacterial levan. Overall, the Rhizobium polysaccharide was found to form thermally-reversible gels at an extremely low 'minimum critical gelling concentration' (c_o∼ 0.35gl^-1). At temperatures above the gel melting point (∼ 48°C), however, the compact polymer coils entangled at comparatively high concentrations (about 60 times higher than c_o). In the presence of a highly branched levan, the thermal stability of ordered CPS structures increased as a consequence of thermodynamic incompatibility between the two polymers.     

超支化聚酯的合成及光固化性能研究

通过甲基四氢苯酐和环氧丙醇的开环聚合反应，一步法制备超支化聚酯，聚酯的数均摩尔质量为1450～2600g／mol，支化度在0．41～0．71之间。用甲基丙烯酸缩水甘油酯改性，合成了UV固化超支化聚酯，并对其光固化性能进行了初步研究，发现超支化聚酯能有效降低固化膜的线收缩率，聚酯的官能度越高，固化膜的硬度越大，固化速度越快，在约1s的固化时问内凝胶率超过75％。     

F级模压定子线圈发空问题的研究

为了提高F级模压定子线圈的质量 ,解决线圈发空问题。通过对F级云母带胶化时间、热压过程的半压时间、热压温度和保温时间的试验研究 ,其应用试验结果表明 :选择合理的工艺条件 ,基本上解决了定子线圈发空问题 ,实际应用效果十分有效     

The influence of additives on properties of heat‐induced gels from salt‐soluble proteins extracted from goose

Calcium chloride (CaCl₂) and phosphates are important additives to improve product quality during meat processing. Response surface methodology was used to study the influence of CaCl₂ and phosphates on the hardness, water‐holding capacity (WHC) and ultra‐structure of salt‐soluble goose meat protein gels. The results show that the hardness and WHC of salt‐soluble protein gels increased significantly when CaCl₂ concentration was increased and phosphates were added. Scanning electron microscopy showed that tetrasodium pyrophosphate (TSPP) and sodium tripolyphosphate (STPP) had a greater impact on the cross‐linking and pore diameter of the gel networks than sodium hexametaphosphate (SHMP). At the 0.02 m and 4:3:2 of CaCl₂ concentration and the ratio of TSPP, SHMP and STPP, hardness and WHC values were 114.55 gf and 96.65%, which corresponded to the prediction value of our model. Further results showed that the hardness and WHC of gels reached the maximum with 0.3% of phosphates levels.     

Influence of carboxymethylation on the gelling capacity,rheological properties,and antioxidant activity of feruloylated arabinoxylans from different sources

Feruloylated arabinoxylans (FAX) are gelling polysaccharides presenting antioxidant activity (AC) and potential application as delivery systems. The influence of carboxymethylation on the gelling capacity, rheological properties, and AC of FAX from wheat flour (FAX1) and maize distillers grains (FAX2) was analyzed. The degree of substitution of carboxymethyl groups was 0.27 and 1.77 for carboxymethylated FAX1 (CFAX1) and FAX2 (CFAX2), which presented a change in M _n from 446 to 362 kDa and from 120 to 180 kDa, and a loss in FA content from 1.05 to traces and from 10.13 to 0.12, respectively, after carboxymethylation. G′ value at the end of rheological tests for FAX1 (71 Pa) and FAX2 (726 Pa) was higher than the corresponding G″ value. In contrast, G″ value for CFAX1 (0.35 Pa) and CFAX2 (0.03 Pa) was higher than the respective G′ value, indicating that they do no form gels. The AC increased in CFAX1 in relation to FAX1 from 4.49 to 8.30 mmol Trolox equivalent antioxidant capacity (TEAC) kg⁻¹, respectively, while it decreased in CFAX2 with regard to FAX2 from 11.31 to 9.43 mmol TEAC kg⁻¹, respectively. Carboxymethylation could be a path to design FAX derivatives offering alternative potential applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48325.     

3种即食鱼豆腐营养成分分析及凝胶性能评价

以3种市售即食鱼豆腐(鱼豆腐A、B、C)为研究对象,对其营养成分和凝胶性能进行分析及评价。结果表明:3种鱼豆腐的水分质量分数分别为65.94%、69.34%和67.20%;粗蛋白质量分数分别为25.63%、22.02%和23.81%;粗脂肪和灰分含量较低。氨基酸种类齐全,必需氨基酸/总氨基酸质量分数分别为39.43%、39.64%和39.57%,鲜味氨基酸/总氨基酸质量分数分别为37.11%、36.06%和36.32%;第1限制氨基酸均是亮氨酸,必需氨基酸指数评分分别为43.81、53.14和49.57。分别检出21、22、21种脂肪酸,且多不饱和脂肪酸含量丰富,分别为59.14%、63.39%和44.59%。3种鱼豆腐持水性较好,分别为84.61%、86.36%和82.98%;p H值分别为6.04、6.06、6.23;凝胶强度较高,分别为320.17、203.63、212.71?g·cm。3种鱼豆腐均属于营养种类齐全,凝胶性能良好的即食食品。研究数据为进一步评定市售鱼豆腐产品质量提供了一定参考。